How To Assemble An AR Kit

[@ahacker420]

By far the best video I've found that shows the parts UP CLOSE. Every one else's videos were giving me a headache lmao.

[@jakecastle4426]

This.

[@ajarrell3919]

This is the best assembly video I have seen. Not rushed, detailed and not pushy. Excellent format and delivery. Do you have a similar video on the bolt assembly start to finish?

[@howtofirearm1549]

Thanks. Yes the 3rd video. BCG (Bolt Carrier Group)

[@mariolaureano8154]

Simple and straight to the point video, good point of view camera showing every detail. I was having doubt that I machined my 80 percent correctly when I noticed my trigger assembly was going to prevent my safety to be installed, but I love how you pointed out, that it needs to be cooked. Thanks!

[@furneymatthew]

This is a great video, thank you for making it. I had to pause a few times and go back, but with the help of this, I was able to assemble my first lower. Thank you!

[@jrod8382]

Great video for the first time builder to follow. I watched a lot of them to do research and found yours to be straight forward and not full of a lot useless talking. Thank you.

[@jmmartin7766]

"It's so easy, even a child could do it... And they do." Excellent vid-- in less than 20 minutes you dispelled all the fear of putting an AR together. Much obliged! Subbed, btw

[@stevepittman5170]

No directions came with kit so I enjoyed this video it was very helpful

[@TheGrewl]

Very well done bro, the perspective is perfect. Thanks

[@takeseverythingyouvegot]

Short and to the point. Thanks.

[@mixerbear2425]

excellent video. Just did my first build using this video. Came out great. Thanks for information

[@jimshomper8304]

Great video! Made my first build very easy.

[@pvasicc209]

Thanks bro. This was nite and day compared to working on my CZ trigger springs kit and sear cage.

[@checkle1redviny]

Best video!!! Super descriptive and gave great tips while doing it!

[@PapaLeeRayandMissy]

From salsa to Zelda music . Thanks for the video brother

[@jamesguthrie7986]

Great Video, straightforward.

[@BrandynLamar]

bro just built a ar in 20 minutes

[@jamesmandelbaum8496]

I was reluctant to actually buy the kit until i watched this video! THANK YOU!

[@johnmaxwell6626]

Do they sell bottom kits already built?

[@chipngo9758]

Detailed explanation. Thanks man.

[@wallclock4648]

This is the best video to use compared to all the others

[@edgardG-f7t]

Bro thank you so much your video is so helpful it help me alot and i got same lower reciver

[@Milkmammi13]

Berry gud video brother 👍

[@JD-vv8rq]

Great video

[@barneythedog977]

OMG the F-ING slide release roll pin was a nightmare, tore my brass hammer head all up I WAS ABOUT TO SAY WELL IM SCREWED, the pin went about .010 to deep and the release would not slide into position to be pinned in, my small punch literally bent into a wave and got stuck in the other hole trying to push it back. LOL I am a trained Machinist so I have hands on so not my first rodeo with tools. I finally got it flush then the nightmare of going all the way through began, I had to use a vise and finally just said F it and beat the hell out of it until it started to move and finally done! Sadly I marred it up some THE REST WAS A BREEZE FOR ME THANKS AGAIN I WATCHED AND FOLLOWED THE STEPS

[@howtofirearm1549]

Yeah that roll pin sucks

[@barneythedog977]

@howtofirearm1549 some scotch bright pad and elbow grease and 90 % of the Mars are gone. That was a pleasant surprise

[@Alan-yd5pc]

Great video. I downloaded it for future reference as it may not be here tomorrow or the next day depending on YT's policies on gun stuff.

[@brucejarrell5707]

Outstanding hoss

[@jeremie789]

Great video. Thank you for sharing

[@JustLetMeVent]

I really enjoyed this. Thanks man.

[@brucewilliams1458]

Sweet good job bro

[@jameschestnut7786]

Good video.

[@barneythedog977]

Bro, you made a solid video! Great pace and info as well as filming it all clearly! I just bought a RightToBeararms ANderson AR15 kit. Tomorrow I will use this video to assemble the lower and pop the already done upper on. THANKS FOR MAKING THIS (PS IT PISSES ME OFF WHEN I SEE MORE LIKES THAN SUBS. ON VIDEOS, COME ON PPL SUB AS WELL YOU PEABRAINS)

[@muddyhotdog4103]

Whatever you do, don't install your trigger guard roll pin like the way it was done in this video. Make sure you support the back side of the trigger guard roll pin hole. Seen way too many people ruin their lower receivers doing it that way beating on it unsupported

[@howtofirearm1549]

Agreed. This was not ideal.

[@badplayer9695]

Outstanding video. Very informative and helpful. I just ordered my ar kit and cant wait to build it!

[@1zayyvo638]

Great video man I been searching to find a video of someone with my exact gun so I could see how to put my arp back together, I lost my springs and a couple bolts , where did you order your kit ?

[@howtofirearm1549]

PSA

[@jerseyhomestead6812]

Great video!

[@mobilegamersunite]

Thanks man! SUB! And saved video incase u want a good walk through for a future build ...I'm working on an AR 10 now 😅

[@natetribon6536]

Where can you pick up those pin helpers on the key ring?

[@howtofirearm1549]

I got mine at academy sports. Probably any outdoor retailer that carries firearms.

[@jayroller7054]

Thank you!

[@portcityengineering]

Great video man what upper is that?

[@howtofirearm1549]

Thanks! It's a PSA

[@christodaro9216]

Do you have a link for the trigger you put in?

[@howtofirearm1549]

www.opticsplanet.com/trybe-defense-v2-single-stage-ar-15-curved-drop-in-trigger.html Mine was a V1

[@DougZ73]

absolutely great video. Thanks so much for posting it.

[@UFOhuntersWorldwide]

Any reasonable kits out there for ar15

[@hustlerhabits7224]

Thank you! GBA 🇺🇸🇺🇸🇺🇸🇺🇸

[@jeremylaws7010]

thanks dude!!

[@larsky333]

I just built a gun with you! Thanks

[@TrustCry]

tuff

[@liggerstuxin1]

Many detents have been lost during the making of these products. It’s a source of sadness to this day.

[@user-sf9rn9yx5f]

Straight

[@adoniswilson]

I love you no gay shit

[@liggerstuxin1]

I like this guys better. kzbin.info/www/bejne/anW0eoVmZ5hgmJYsi=LsmXhaZ6SYDClZgq Also you can put a magnet on the first pivot pin to hold the detent. KZbin channel “School of the American Rifle” is a great KZbin channel that has regular content.

[@charleswilson9981]

Great video

[@jerrydelatorre5977]

Great video!