Note to PR-4000 viewers: at 0:23 he mentions using "a 36 socket." I assume he means a 36mm socket which may be the case for a PR-5000 but for the 4000 you will want a 15/16" (or 23.83 mm) socket for assembly.
@longhorn5083 жыл бұрын
man thanks for that. I am headed BACK to lowes now...
@REPfitness3 жыл бұрын
Ah yes! Good tip. PR-5000 racks have 1 inch hardware, whereas the PR-4000 uses 5/8" hardware
@laiphilip3 жыл бұрын
After I watched the whole video i cant find what i need. I m glad I scrolled down to the comments. Thanks so much.
@sageollie3 жыл бұрын
For the PR5000 V2 - 1" hardware, you can also use a "1 - 3/8" SAE socket, it fits on the nuts but not the bolt head.
@rickywilliams73972 жыл бұрын
Came here to say this!
@kyles83912 ай бұрын
Video was a lifesaver as I'm putting together my PR-5000. Dan, couldn't help but think that you wouldn't have needed that step-stool if you and Matt had swapped roles while attaching the pull-up bar and logo plate!
@FiveStripedFalcon Жыл бұрын
Excellent video. Took me more time to unpack and clean the packing materials than building the rack.
@richards64312 жыл бұрын
I recommend using a box wrench instead of a crescent for the Logo Crossmember. A crescent wrench will not fit inside the cut out for the top hole on the Logo Crossmember, a box wrench fits perfectly.
@Shadburn5 ай бұрын
The "Dan The Man" Interlude and Intro music is so epic! 🤣
@PatrickBarnesGreatBear Жыл бұрын
Just assembled my PR-4000. This video made it pretty simple. Like another post, it took longer to remove everything from the packaging than it did to assemble. Thanks.
@Dbright70011 ай бұрын
How long did it take you?
@Mexi992 жыл бұрын
Life saver! Watching this video it made 100000000x's better to install this. I just got the pr4000 and Lat attachment and it took me around 2 and half hours. I think it took me longer to see where I wanted to place the actual machine then to build it! Thank you! amazing video! Remember you need a 24mm socket for the pr 4000
@rebuildingrocketships2 жыл бұрын
My exact experience too! Haha. Actually breaking down all of the boxes was the biggest pain ;)
@Mexi992 жыл бұрын
@@rebuildingrocketships So true! A ton of boxes! Did you get the front extensions? I did! I might return them if I can. this rack does not move at all.
@rebuildingrocketships2 жыл бұрын
@@Mexi99 I did along with the spotter arms, iso arms, lat / low, and two extra extension posts for weight storage. This rack ain’t going to budge without the front extension legs! I suspected it’s more of a hassle to return tho so I’ll hang on to them for a bit and if I don’t need / want them I’ll try to sell locally. I worry I’m going to trip over them 😂
@Mexi992 жыл бұрын
@@rebuildingrocketships Yea i was going to return them but it's such a pain. %15 restocking smh. guess ill hold on to them lol
@Mexi992 жыл бұрын
@@rebuildingrocketships Yea.. I'll probably try and sell my safety spotter arms and the front stabilizers. pretty much useless since i have the flip down safeties and getting hit with the 15% returning fee isn't worth returning at that poiint im losing money
@user-le6rk7dc7n8 ай бұрын
Great video, made assembly a breeze. REP including a tool to reach nut in logo plate was a great addition.
@TheFirstRealChewy3 жыл бұрын
Good video. I got the 4000 and am assembling it now. I don't have a helper so I'll assemble it on the ground and walk it up. Will see if that works.
@84_Gor3 жыл бұрын
I purchased the same. How did it go with no help??
@rickywilliams73972 жыл бұрын
It’s already been said but I’m here to reiterate. The 5000 rack might need a “36 socket” (36 mm) but the bolts for the 4000 rack use a 24 mm socket. If you don’t already have this size socket at home (I did not) just take a bolt with you to the store to verify the size.
@Bjustis22229 ай бұрын
Thank you. Big help 4000 user here
@KSxPharaoh3 жыл бұрын
I love seeing the 4000 in stock throughout the day. That tells me I'll easily be able to grab one when I'm ready. Blue uprights and gloss black crossmembers. Now I just need to start seeing the bumper plates or sport plates in stock. You'd think it'd be the opposite.
@alexlee69933 жыл бұрын
no longer in stock. LOL. I've been waiting to make sure I can budget for it the past 3 days...and on the day I was going to purchase.....NOT IN STOCK NO MORE :(
@KSxPharaoh3 жыл бұрын
@@alexlee6993 check daily it's restocked a lot but the parts like safeties n attachments have been out of stock forever
@REPfitness3 жыл бұрын
The PR-4000 is in stock now at www.repfitness.com/strength-equipment/power-racks/pr-4000-series/pr-4000-power-rack. We'd recommend you act fact as this is one of our best-selling racks!
@bigshowns1 Жыл бұрын
Awesome video. It looks like it's very high quality and easy to assemble!
@nightroad1026913 жыл бұрын
To everyone wondering when the item will be in stock I would reccomend buying the parts separately. You do pay roughly almost $100+ (i could be off on the math so my bad). Since everyone is making a gym garage/basement most if not all companies are sold-out/back-ordered but they do sell the parts separately still. Just don't make the same mistake I did and buy 8 crossmembers size 41" for a six-post-rack... make sure you have your rear crossmembers as a 16".... other than that I'm glad this video is available because I haven't seen anyone else put up an assembly for the PR-5000 v2.
@TwoWheelNinja3 жыл бұрын
More like end up paying $1000 extra in shipping
@REPfitness3 жыл бұрын
Great tip - We're excited that we're able to offer that option to buy the rack components individually. Not only does that allow you to get pieces as they come in stock during such high demand, but it also opens up the door for future upgrades to your configuration!
@nightroad1026913 жыл бұрын
@@REPfitness 4real I've been doing that and I pretty much got all my equipment and by observing the ETA List/ IG Updates. Most of my equipment was shipped together. I just placed another order 2min ago 🏋🏾♂️🤙🏾
@Carlitos-on23 жыл бұрын
Nice video. That was a great tip to use the pull-up bar as a spacer for the bottom feet. You can also use 2x4’s cut at the same length as the pull-up bar in case the bottom moves. Or cut at 41-3/8” if you are getting the belt squat along with the power rack.This would be an 1/8” wider than the belt squat attachment and ensure a nice fit. For those getting the belt squat I would also suggest moving the bottom cross members as far up as possible. This will ensure alignment of the holes.
@blythg13942 жыл бұрын
What is the correct amount of torque needed to tighten bolts on PR5000
@ltmusic85126 ай бұрын
Thank you for the video!!
@TheRealCR3 жыл бұрын
Just got mine in. All blacked out. Such a beauty.
@miguelmacias17143 жыл бұрын
What’s up with the expansion bolt what can I use them for ?
@jamessderby3 жыл бұрын
Mine just got here woohoo
@REPfitness3 жыл бұрын
Oh boy! Happy REP Delivery Day!
@sheckyshabazz23 күн бұрын
The site only recommends the stabilizer for the 41" depth rack. Does that mean a 30" depth rack has to be bolted down?
@REPfitness22 күн бұрын
We always recommend to bolt the rack down but the bigger the footprint the more stale your rack will be. If working on the outside of the rack we suggest adding the front foot extensions- if you dont have weight horns on the back of the rack we also suggest bolting the rack down or having front foot extensions so the rack wont tip over.
@sking379 Жыл бұрын
What size are those bolts..? 1 inch by 4 or 5 inches..?
@gilldaman625910 ай бұрын
The nuts are a bit different in the pr 4000 I just received. I'm assuming they are meant to eliminate the need for the locking washer but I can't seem to hand tighten them. Is this normal?
@REPfitness10 ай бұрын
They are probably lock nuts - www.homedepot.com/b/Hardware-Fasteners-Nuts-Lock-Nuts/N-5yc1vZc2ez
@DesignBuildLift Жыл бұрын
This was a great help! Thank you!
@TheSauceistheBoss3 жыл бұрын
I mean there are not numbers on each side of my 4000, you guys need to put a sticker on that says left or right that'd make it easier
@spadecheck88743 жыл бұрын
I'm going to get one this month.
@REPfitness3 жыл бұрын
YESSS! Welcome to the REP rack club! What color are you going to get?
@spadecheck88743 жыл бұрын
@@REPfitness you guys are out of stock on alot of things.
@Brandon-sb8li2 жыл бұрын
I really don’t plan on bolting into the concrete so is there a way I can secure it without bolting? Like do I need plywood or something underneath and bolt into that? If so, what exactly should I get? Also, when will the front foot extensions be back in stock in case I do need it?
@anubis24354 Жыл бұрын
I know this is an old comment and you’ve probably figured this out by now but for other people that may pass by this in the future here’s what I’ve found if you don’t want to bolt it down. If you have the 41” rack it should be stable enough without the feet IF YOU ARE NOT going to lift outside the rack with safety spotter arms. If you have the six post configuration, it’s supposedly sturdy enough to lift outside even without front feet, especially if you’re actually using the extension for weight storage. Still not sure I’d feel comfortable doing so. The big takeaway is that with a 41” depth rack the real question is will you be squatting outside the rack with spotter arms? If no, you’re probably good to go. If yes, you probably at least want the legs. The rear base stabilizer seems to only be needed with smaller configurations or with the lat pull-down/low row attachment.
@chrisheizmann851610 ай бұрын
@@anubis24354 What about a 30" and doing reps inside? Safe-ish? I am in a rental for a few months and cant bolt to the garage floor here.
@blackhemi043 жыл бұрын
Can I use a impact wrench to tighten everything down or will it dimple the metal?
@Maars363 жыл бұрын
You can I used my impact wrench no problem.
@privtprofile249 ай бұрын
Could I technically lower the top crossmembers by like 3-4 holes? I have a 94 inch ceiling so I wouldnt be able to mount the multi grip pullupbar. I dont like the upside down mounted pullupbar since I want to be able to do ultra wide grip pullups. The 80 inch rack is too short for me to do standing OHP.
@ZenithsCipher2 жыл бұрын
Just assembled mine today. One issue: I can’t find a way to tighten the upper bolts for the nameplate, there’s not enough space for an adjustable wrench to reach the nuts inside of the nameplate. I have to order a 36mm wrench for them.
@kellerv.6022 жыл бұрын
hey did you ever figure it out? I’m having the same issue
@robertgmatlack32222 жыл бұрын
I used a pair of visegrips on the inside nut while I tightened the outside with a 36mm socket
@simsjw2 ай бұрын
@REP do you recommend assembling the PR-5000 b4 adding the Aries (2.0) or should i wait to assemble all together?
@REPfitnessАй бұрын
Either way will be fine! If the Ares is on pre-order we suggest to build your rack so you are able to use it before your Ares gets to you!
@simsjwАй бұрын
@@REPfitness ok great. BTW, we would like a pec fly system outside of using the cable. I say "we" cause I'm now team ReP 😉
@elvelos793610 ай бұрын
I don’t see a how to install video of the athena functional trianer.
@Moonkey-d4b4 ай бұрын
What’s the item number for the bolts
@ThEk1dViC Жыл бұрын
The hardest part is the rep plate. If your floors are uneven of any measurement, good luck. 😂
@hajirbrain7 ай бұрын
Can I set up in a sloped garage without leveling ? Looks like the base does not have any adjustments for unleveled flooring
@REPfitness7 ай бұрын
You can use some shims (many stores sell them) to level out any uprights that may not hit the ground. It's also important to put the rack together with bolts loosened, find a spot you want to set the rack, then tighten them all down. This will help with keeping the rack level.
@grantf.2 жыл бұрын
Do you guys have a ft-lbs torque to tighten the bolts to? Just got my 5000 v2. Mine came with no instructions.
@REPfitness2 жыл бұрын
Here are the instructions: help.repfitness.com/article/76-pr-5000-v2-assembly-instructions As far as tightening the bolts, go a quarter turn past where it feels tight. Do not overtighten the bolts as you can bend the steel and these 1" bolts are secured with the washers as well.
@grantf.2 жыл бұрын
@@REPfitness awesome thank you! I'll keep an eye on the tightening, I'm using a torque wrench so I'll start low.
@bench175 Жыл бұрын
@@grantf. What torque did you use? lol. I wish REP would figure it out.
@grantf. Жыл бұрын
@@bench175 it was 40 foot pounds. It seemed to hold everything snug without bending metal.
@blackhemi043 жыл бұрын
Does the PR4000 come with the locking washers? I don't recall having those with the PR4000.
@REPfitness3 жыл бұрын
The PR-4000 comes with nylon locking nuts (whereas the PR-5000v2 comes with split lock washers) Email info@repfitness.com with additional questions.
@josephduckworth1858 Жыл бұрын
Honest question.. why do you need a 6 post set up for weight storage? That seems unnecessary. Cant you just put weight horns on the back posts of a 4 post setup?? Thanks!
@REPfitness Жыл бұрын
Hey Joseph - it would interfere with the plates on a loaded bar when working inside the rack. For a faster response, drop us a line here or give us a ring - Thanks! - repfitness.com/pages/contact-us
@Oqa324674 ай бұрын
Can you carry all the boxes into a house down a flight of stairs by yourself ?
@32cviper3 ай бұрын
Uprights and crossmembers came in pairs in separate boxes. I was able to carry the boxes by myself. Boxes for uprights were the heaviest but doable.
@nickclaro54443 жыл бұрын
i want that clear coat but oos
@johnnygunzfilmbuff78217 ай бұрын
I'm rearranging my home gym and what kind of tools do you use to take the pull up bar down? I'm putting a wall mounted cable pulley system up and moving my rep 5000 power rack.
@REPfitness7 ай бұрын
Hey Johnny, best to reach out to our customer support team (phone/email/chat/text) at the bottom of our site and they can get back to you with specifics.
@johnnygunzfilmbuff78217 ай бұрын
@REPfitness okay ty.
@jorgetorres93603 жыл бұрын
When assembling should the numbers on the 4000 be placed facing me? And should this be done for all posts? I ask, as this determines where the holes end up inward or outward for bolting the bottom posts to the ground.
@REPfitness3 жыл бұрын
Please contact our team at info@repfitness.com - they respond in hours! (We also have chat for a near instant response)
@ChristopherHerbertherbietown23 күн бұрын
Oh man just answer the question here for everyone else!
@jeremiahyeahheah5063 жыл бұрын
"We do offer the rear base stabilzer" No, no you dont. Its been out of stock forever and the eta date has changed like 20 times already. Latest was 2/2-2/8.....now 2/15. Can't wait to see it change again!
@REPfitness3 жыл бұрын
We understand the frustration here - unfortunately, we've had to update some of our ETAs due to unexpected delays in our supply chain. We update our ETA page daily to reflect the current situation based on these factors. Please email info@repfitness.com if you have additional questions.
@nightroad1026913 жыл бұрын
It is in stock right now
@jeremiahyeahheah5063 жыл бұрын
@@nightroad102691 ordered it early Monday when it came back in stock. Thanks for the heads up though
@fernandoaustria6350 Жыл бұрын
did they stopped selling that rear stabilizer? I don't see it on the website anymore.
@REPfitness Жыл бұрын
repfitness.com/products/rear-base-stabilizer or type in 'rear' in the search function on the top of the site.
@futbol19722 жыл бұрын
So the PR 5000 is the same as PR 5000v2. I built my rack at rep fitness its a pr5000. Iam a little confused I chose the 80" rack and 30" if I buy lat pull down attachment and stabilizer I won't need to bolt it down correct?? Will the rogue leverage arms work on this rack? OK this is my dilemma.🙄 I currwntly have this set up PRX wall rack and separate valor lat pull down machine, separate rogue pull up bar, separate rogue band station with matador dip attachment and landmine (this is what I currently have right now) and many of other things.. I want the rogue arms so for that I will have to get another rack I think so I been looking at the one mentioned avobe..now if I get the pr5000 with lat pull down, rogue leverage arms, dip, land mind and pull up bar attachments I can sell all my other stuff and this way I will have everything consolidated in one rack..don't know if I will like everything cramped up in one place though🤔🤔. Or maybe just replace prx wall rack with rogue wall rack and keep everything else in separate stations like I have it now??🤔🤔
@REPfitness2 жыл бұрын
Hey Marco - I see your comments on a bunch of our videos. Hit us up with all the questions you have - info@repfitness.com or 720-420-1731 - we love talkin equipment.
@CraftLulz2 жыл бұрын
How much does the pr-5000 weigh?
@brandonfig96303 жыл бұрын
Where do you begin tighten the wrack? I got the 5000 with weight storage just don't know where to start
@REPfitness3 жыл бұрын
Hey Brandon - drop us a line at 720-420-1731 or hit up info@repfitness.com and our team can help. Also - we have assembly instructions on our site - help.repfitness.com/article/76-pr-5000-v2-assembly-instructions
@Bmoseley853 жыл бұрын
I just ordered my PR-4000. What size sockets do I need to assemble that one?
@REPfitness3 жыл бұрын
Hey Jaymes! Email us at orders@repfitness.com and we'd be happy to help you out with any of your assembly questions!
@HighSpinSwingSpeed2 жыл бұрын
Iron workers always have the nuts up and out. Never down and inside.
@Didewro3 жыл бұрын
Can i order this in low ceiling version?
@REPfitness3 жыл бұрын
80" uprights are our shortest option for the PR-5000v2!
@marquisegoodwin24812 жыл бұрын
0:25
@MakingYouCASH Жыл бұрын
How the hell do you install a 6-post rack!!!
@REPfitness Жыл бұрын
Drop us a line - happy to answer any questions - repfitness.com/pages/contact-us
@Egghead11993 жыл бұрын
How tall is that giant jeez
@REPfitness3 жыл бұрын
Tall! Very tall!
@VishalNarayanSaxena3 жыл бұрын
I got my 6 post with front stabilizers, getting to start the assembly. do you know if I need to bolt the rack into the platform?
@kevintjahjadi8994 Жыл бұрын
It’s NOT a 36 socket. It’s a 24. This video wasted me two tripes to the hardware store. Cmon Rep…
@REPfitness Жыл бұрын
Dan is putting together a PR-5000 in the video, which uses a 36. The title includes PR-4000 because it's the same steps, but the PR-4000 does use a 24. Hope that helps explain that. Apologies on the double trip.
@pivan182 жыл бұрын
Very disappointed in customer service for updates on orders that are 2 weeks late. Im missing part of my order, have not got a response for the reason
@chrisstokes684810 ай бұрын
Really annoyed at the fact you said 36 socket… that’s no where near the size…. Way too big.
@matthewforester9 ай бұрын
36mm is the exact size needed. I am building my rack right now.
@JT-rq7nt9 ай бұрын
It's 36mm for the PR-5000, but other commenters said the PR-4000 might needs something like a 24mm, if I recall correctly