Рет қаралды 140,643
How to assemble a yamaha mio gt, mio j, fino, x ride engine. Injection until it comes to life, starting from the lubrication of the piston handlebar and lakher or crankshaft bearing. Then attach it to the engine block rengkes, and must be positioned correctly so that it doesn't flip between the parts. magnet and timing chain, then attach and use a tool to slightly press the crank of the engine. after fitting and in the lock with bolt 8 and must be crossed.then install the oil pump gear and it should fit.then install the road spool and the fulser and tighten the magnetic lock nut. Then attach the timing chain and tensioner. And also attach the cylinder block and the head components. After that, attach the large front synchronous gear and top TMA (Top Dead Point) and position the line on the magnet so that it is aligned with the knuckle on the grip. magnetic block to the right and tighten it while attaching the tensioner setting. Then adjust the valve with a size of 0.06 to 0.010 both the in and the ex. And install all the parts of the frame as before and Alhamdulillah the motor is alive. Thank you very much to all #SUBSCRIBER# and viewers, hopefully the knowledge is useful. Please #SUBSCRIBE LIKE COMMENT AND SHARE# #SIDIK NURYADEN CHANNEL# If you have questions, you can write them in the comments. Tel/WA: 085863491419. Thank you very much.