Thank you so much... After 2 hours of mind boggling frustration, you nailed it in 30 seconds.. Grateful
@sharonlingo96113 ай бұрын
You are a valuable spokesperson for Vortex. You walked many of us through the process with clear instructions. Thank you. Much appreciation!
@rexaparece91246 ай бұрын
Thank you! You would think it’s elementary but I had the hardest time figuring out how to tie the strap of the binoculars I bought from Amazon! This video solved that problem!
@GardeningGraceAndGratitude10 ай бұрын
Thank you so much. After an hour of unsuccessful attempts I decided to look it up on KZbin. It then only took a couple of minutes and then success. ❤
@PaulNathan8212 жыл бұрын
Thanks, very helpful. Despite reading many descriptions nothing beats actually watching it being done! Visual direct one-on-one instruction, always the best way to learn.
@Gallantknightxxx7 жыл бұрын
Found it very fiddly and couldn't figure out how to do it, so thank you for making it so easy by watching your video.
@LostGecko Жыл бұрын
Thanks, straight forward and helpful. Nice one.
@regisauffray Жыл бұрын
Thank you very much. It still took me about an hour to get the job done but I am not very good at such things. Your video was very helpful.
@noeb52505 жыл бұрын
Thank You so much........I could not help my daughter out before she left with her mother, but thanks to you she'll be happy 😊 when she knows I could do it!
@laura.a.peters5 жыл бұрын
Got a new pair of binoculars and could not figure this out from the badly written instructions and poor quality photos! This video reminded me how to do it. Thank you for the "aha" moment! :)
@aprilianindy32003 жыл бұрын
Took me like half an hour to figure this out, even while watching this video 🤣
@regisauffray Жыл бұрын
Don't feel bad. It took me over an hour and, without this video, I would probably have simply given up. 😎
@philtrokanski2282 Жыл бұрын
Thank you for the excellent instructions!🤓👍
@LaToyaPlansLife Жыл бұрын
Very helpful! Thanks for sharing this with us!!!😉
@Staboogie7773 жыл бұрын
I’m so thankful for videos like this!
@stuntedmonk Жыл бұрын
Thanks for this, no doubt saved me attempting to do this task 20 times! The Nikon instructions are somewhat vague
@lalahlela8003 Жыл бұрын
Super helpful, thank you! Thanks for explaining, other videos just have demonstration 🥵
@cassiocm11 ай бұрын
This is extremely helpful. Thank you!
@tsykin6 ай бұрын
Thanks, it worked for my Nikon Prostaff P3
@JudyDeur2 ай бұрын
Thank u so much I am so thankful for u ❤😊🎉
@jessemurdock24062 жыл бұрын
Thank you lol. Happy grandparents now!
@opticron2 жыл бұрын
Happy to help!
@Craigskitchen3602 жыл бұрын
Took 30 min to figure that it comes packed and must be removed from the strap. It’s like a belt buckle. I need a pint
@smahmood4642 Жыл бұрын
Great video, thank you!
@buddah773 Жыл бұрын
Thank you so much.
@ArtfulTreats2 жыл бұрын
OMG! Thank you!!
@Leonbergerss Жыл бұрын
thank you, very helpful
@HardRockMaster75773 жыл бұрын
Drop the music...
@frankburns88718 жыл бұрын
I still don't get what the sliding plastic rectangular things are for, though.
@pokeround4 жыл бұрын
I think it's for tidying the loose end of the strap if you don't pass it back through the buckle.
@frankburns88714 жыл бұрын
@@pokeround Ah, that would make sense. In fact, I can't imagine what else it could be for now that you mention it. Thanks.
@frankburns88714 жыл бұрын
@Uncle Ed I'm with you on that one...not sure how it makes sense in the context of this video, but yeah.
@bubbajohn81313 жыл бұрын
The small sliding rectangular thing is on the wrong part of the strap. The rectangular slide should be close to the strap lug.
@petertang39033 жыл бұрын
I have used two Opticron lanyards (40mm and 30mm) and they are both very long that I had to cut off the excessive bit. I guess this is intentional as some users may need the lanyard long, e.g. when carrying a camera at the same time. If it's too long you can cut it, but if it's too short you can't make it grow!
@compaticher79322 ай бұрын
gracias
@lindawinter78134 жыл бұрын
This didn't help me as we have one side of the strap that has a 2nd short strap that goes to one of the lens caps.( and it has a quick release on it) the other main strap for the opposite side is the same length as the first strap. My problem is that the lens cap covers for both the eye end of the binocs and the far end of the binocs have their loops for the straps such that only one strap will hold covers. Yet it doesn't seem to be long enough to hold both. Does any one have an idea on this or another video I might watch that would solve this problem. It's so hard to describe in words and the manufacture couldn't help!!(Bushnell which has taken over this Weaver brand model 849825)
@davidjmrussell54972 ай бұрын
Thanks. But l blame the designers for inventing a strap that needs a youtube video.
@MrDavide19765 жыл бұрын
is it normal that with time the strap gets stripped, causing the binocular to fall down on the floor?? or maybe is a matter of strap's quality??!!
@theaccountcreated89625 жыл бұрын
This never explains how the buckle should be positioned or threaded BEFORE you put the tag end through.
@laura.a.peters5 жыл бұрын
I agree that it should have shown that better because her hand is in the way and you can't see it. I had to rewind several times over that part before I could figure it out. LOL.
@HardRockMaster75773 жыл бұрын
They don't care...
@komkom34252 жыл бұрын
too fast
@84saints2 жыл бұрын
This isn’t a very good video. The camera is facing the model and can’t see what she’s doing cause her fingers are in the way.
@bjones5791 Жыл бұрын
Your hands were in the way,couldn't see how to do it.Threw out the binoculars.Not worth the stress.
@tamaskovacs9915 Жыл бұрын
Nope! This is perfect video how to don't use a buckle. 😂 The buckle is a self tightening system, which works correctly the opposite way.
@anthonyreitano16228 ай бұрын
What about the F lens covers. Jesus Christ
@arkrazor3542 жыл бұрын
My aculon 30 8x25 does not have a quick release system. You can’t put the lanyard back through the safety back through with integrity once it is unthreaded. The only solution other than buying a different lanyard is to staple the lanyard together once it’s through. Video was a waste of time.