How To Bag A Truck : Final Suspension Assembly

In this video we replace the ball joints on the front and weld the front cups in. We finally finish all the heavy fabrication to make this truck do its thing. This is the final assembly on the suspension before we tear into the bed.
Be sure and stay tuned and subscribe as we plan to build this truck over a series of episodes. We call this project "Project Fun Bags".
Ep 1: • How To Bag A Truck : P...
Ep 2: • How To Bag A Truck : M...
Ep 3: • How To Bag A Truck : M...
Ep 4: • How To Bag A Truck : I...
Ep 5: • How To Bag A Truck : S...
Ep 6: • How To Bag A Truck : S...
Ep 7: • How To Bag A Truck : S...
Ep 8: • How To Bag A Truck : M...
Ep 9: • How To Bag A Truck : M...
Ep 10: • How to Bag A Truck : F...
We are not mechanics and we are not responsible for anyone not doing research before performing any kind of mechanical fix on any and all vehicles that person may or may not own. Fix your vehicles at your own risk.
Our website where you can get our totally rad shirts: bit.ly/2zpTwVR
Here is our FaceBook: @garagejunkie
Instagram: @garagejunkieapparel

[@yomommajumprcables]

Those same lower ball joints whipped my ass. GREAT VIDEO SIR

[@austinadams7690]

I use a torch to cut the heads of those rivets off and let it cool and the pins come out with air hammer. Sometimes have to heat the a-arm a little

[@sharkeyshark4410]

That end “lean” would drive me nuts, but I do appreciate the videos, they were informative and pretty cool to follow along..

[@garagejunkie6742]

Sharkey Shark yeah, we wanted to do a full frame and body drop. Wasn’t our truck but our buddy is happy with it and I suppose that’s all that matters.

[@sanjuan240]

Idk u guys made bagging a truck seem kinda easy. I always thought it would involve crazy amounts of work. Can’t wait to see it with the bed on

[@garagejunkie6742]

sanjuan240 thanks! Not as easy as it seems sometimes. But it gets easier the more you do.

[@sanjuan240]

Garage Junkie Official I’m in AZ too if I can’t figure it out I know where to take it

[@garagejunkie6742]

House of the Lowered/garage junkie! Thanks for your support!

[@garagejunkie6742]

sanjuan240 for sure! Let us know if you need anything.

[@lowboostedaccord4933]

Keep up the great work

[@sadambomb]

I have that same bumper on my Daily! Lol...... nicccce.

[@Smalltownlyfe]

Git it boys!

[@garagejunkie6742]

Pitter patter!!!

[@augienajera642]

Nice work!!

[@garagejunkie6742]

Augie Najera thanks man!

[@garagejunkie6742]

Augie Najera thanks man!

[@donson37]

I would like to see you guys do a bodydrop on a Silverado

[@garagejunkie6742]

Don Govero lots of projects on the board but it’s on the list!

[@Lowpsi]

Was the lower ball joint on upside down or am I seeing things?

[@garagejunkie6742]

Sparky Th3Legend no, the lower ball joint faces down on these trucks.

[@Lowpsi]

Garage Junkie Official gotcha,I have an obs that’s bagged.i haven’t ever messed with any cateyes before.great video keep them coming

[@garagejunkie6742]

Sparky Th3Legend for sure! There will be more coming!

[@victororo4247]

How did you limit the front down travel with out bump stops

[@dc2ftw]

Nice, will y’all be sectioning the transmission crossmember? It would sit lower up front

[@garagejunkie6742]

Not unless the owner decides he wants MOAR low...

[@dc2ftw]

Garage Junkie Official there’s never enough low lol nice work tho guys 👍🏼

[@josenarvaez5338]

Where did you install the tank and air compressor?

[@S.V.M-MCMXCIX]

whats the pros of 6 link vs 4 link? seems to some of the links are quite low may be wrong thoo

[@ElGoyito_]

What bumper is that bad ass

[@Smalltownlyfe]

MOAR VIDEOS!

[@garagejunkie6742]

No vidyas for you! (I'm the vidya Nazi)

[@210GotKickz]

Where did you get the links for the rear? Did y'all make em?

[@jayhernandez2163]

What shocks you using

[@bigbear9185]

Did you guys have to cut fenders or is he going to keep the same size wheels?

[@garagejunkie6742]

Bigbear 918 we left the front fenders alone. He ended up putting 24s on it and talked about raising the inner fenders but it hasn’t been done yet.

[@bigbear9185]

Garage Junkie Official I would love to see some videos about that if you wind up doing it.

[@garagejunkie6742]

Bigbear 918 yeah, we’re late on releasing videos but the owner is driving it now. We’ll definitely update if it happens.

[@bigbear9185]

Sweet .. you guys rock

[@boostboy787]

What air suspension kit it on?

[@JoseGonzalez-go4nx]

No shocks needed ?

[@garagejunkie6742]

They’re on there. If you watch the video after we painted it, you’ll see em.

[@sloppycscustoms2725]

What would you charge to bag my truck? It’s an 04 extended cab silverado. Been wanting it done forever just don’t have the time to do it myself. Anywho, love the channel. You guys are dumbasses and I love it. 🤙🏻 keep um coming for sure.

[@garagejunkie6742]

Cameron Cloward it really depends on what your goals and budget are. Anywhere from $2500+. This isn’t your simple bag setup and wasn’t cheap. Glad you like our channel, thanks for the comments!

[@sloppycscustoms2725]

Yeah I’d probably want a 4 link. Lowest budget. Lol I’m basically looking for the better ride with bags. Doesn’t need to lay out but that’s always pretty sweet. My truck has a 4/8 drop on it now (haven’t put the 2” lowering springs in yet, be a 6/8 when I do) so really just want to keep that hight being the lowest driving hight but with the better ride bags give you. Also I have 22s on it with a 265- 35 tire and I’ll be keeping them so i don’t think I’d have to tub it out or anything. Anyway I am serious about getting it done so you wouldn’t be waiting your time punching numbers. Thank for the reply man. 🤙🏻

[@garagejunkie6742]

@@sloppycscustoms2725 send us a message on our FB or insta page, and we'll get you a quote

[@jacobgomez2818]

Did y’all do front tubs or modify the front fenders at all to get it to tuck that much?

[@garagejunkie6742]

We did not. The customer didn't want to do tubs. It has 24" wheels on it now, and sits roughly the same.

[@jacobgomez2818]

Garage Junkie awesome! Do you guys have a way I can contact you? I need that done to my truck I already had the rear done but it’s time for the front now !

[@garagejunkie6742]

You can contact us through Facebook or Instagram on our shop page House of the Lowered.

[@estefanibojorquez1339]

Are you located in Phoenix?? & if so how much do you charge to bag an 05 Chevy Silverado single cab. Exactly like that on the video

[@garagejunkie6742]

We are in Mesa. Send us a message on our FB or insta pages, and we'll get you a quote.

[@Julian-kv9xs]

That front bumper 🤦‍♂️

[@nikog4071]

Where are you guys at in Arizona?

[@garagejunkie6742]

Mesa/Tempe/queen Creek ish

[@nikog4071]

@@garagejunkie6742 How far is that from Peoria I'm new to AZ id like to find someone who can add two more doors to my f250 I know we would have extend frame and also do TANDEM REAR END..If you all can do this let me know cause it will be bagged going from a 4 door to 6 doors on 26's let me know