Hopefully this helps someone out there! Note: Don’t completely fold the bend!! You might break the connection Also only fold on the “cut” line
@driggsy Жыл бұрын
@@EpicGamer.18 How so?
@Whips383 Жыл бұрын
Just worked for me on my TV made a perfect rectangle along the back 🙌
@EpicGamer.18 Жыл бұрын
I just did it wrong sorry it actually works I am leaving a like😄
@Brazilian_sushi11 ай бұрын
Helped me thanks 😊
@driggsy11 ай бұрын
@@Brazilian_sushi Love to hear it!
@ham.productions11 ай бұрын
Of course I see this after I install mine 💀💀💀
@Ray_abc10 ай бұрын
Thank God I see this before installing mine 😅
@ham.productions10 ай бұрын
@@Ray_abc had to run it in my face lol 😂
@Ray_abc10 ай бұрын
@@ham.productions hehehe
@LetsGetGaming.10 ай бұрын
Same
@chipo15749 ай бұрын
Same
@honey7777711 ай бұрын
My directions literally has a picture saying not to do this lmaoooo
@coriscomedy11 ай бұрын
Mine as well!
@wiktoriagwozdowska548410 ай бұрын
This is how I destroyed my really cool lights I put around a desk 😢... Trust me don't do it 😑 instead where you need to bend the lights leave them not glued in that place and make a small curve so you would not bend the cable ,I'm bad at explaining but if you look for Goove lights you might find their manual which explains it. Also I do truly recommend getting Rgb lights which are covered by this thick rubber you will not break those and they are easy to install even better than those without because u don't have to worry about breaking them all the time 🙂
@NewAgeAutoParts10 ай бұрын
@@wiktoriagwozdowska5484ok so which company is this? I also want to get the chasing lights version as well. My main thing is I want to be able to sync them together for music via the app so all of the lights everywhere are playing in the same color. Since I’ve grouped my lights they start playing different colors on their own now when on voice activated but it shouldn’t rely on both Bluetooth units it should only be one damnit lol bc they’re synced.
@subyouwont7 ай бұрын
A corner piece costs 2$. Just buy and cut
@Boxman57 ай бұрын
Folding it like this is an easy way to break the connection.
@Pro88teC Жыл бұрын
Done it. Broke a line. Now it only R😂 G and B is dead.
@RobynnxX10 ай бұрын
Scratch away some of the coating and just use some solder to fix it
@himanshrasal5 ай бұрын
@@RobynnxX I everyone knew how to solder, wouldn't they just solder some jumpers to get a perfect 90⁰ angle?
@teentrillionaresigma4 ай бұрын
Same
@dior666-3 ай бұрын
@@himanshrasalits easy though
@Dimma205gti2 ай бұрын
@himanshrasal that is exactly what I do with my tv's and monitors. Just solder some wires for 90°. So much neater.
@ANONYMOUS.scooter Жыл бұрын
Let me tell something if you bend like that you can destroy the connection in the led strip and your RGB will be paralyzed
@heyofficial3313 Жыл бұрын
I did it and it happened but mine completely snapt
@SMARTSUB.11 ай бұрын
Same and it fully ripped and half of the led light are not working
@OLD_TADZIO11 ай бұрын
I prefer to use cables as conection
@zadekeys219410 ай бұрын
Exactly. Dude making the vid is a fool, just listen to him say "this is how you fold rgb"... No, you are folding an led strip... He should.cut it and get the 90 degree connector.
@ANONYMOUS.scooter10 ай бұрын
@@SMARTSUB.that what i mean paralyzed
@heyofficial3313 Жыл бұрын
I tried this and my led snapt in half so don't try this
@amusmentinfo9642Ай бұрын
You have to do it at a section where there are no pins (resistors) and no bulbs…
@markensermo827111 ай бұрын
No, you never fold rgb! In your case a flex neon rope/ silicone flex diffuser would have give a much cleaner and proper look.
@GamrokFeddy8 ай бұрын
Bot
@GamrokFeddy8 ай бұрын
Wait not bot???
@worldspam56823 ай бұрын
@@GamrokFeddy some people are just deranged enough to put someone's ass on a pfp. KZbin algorithms are bullshit in that regard
@mikeemmons10793 ай бұрын
I think I will follow the directions that came with the product, thanks.
@dalethyahusha8370Ай бұрын
They don’t mention this just basic instructions
@Pakistani8905 күн бұрын
lol😂😂
@dancisxАй бұрын
Properly you need to install it on an aluminium profile for cooling and sticky-ness, also, bending the strip puts a lot of mechanical and electrical stress in the bending point, so expect it to fall of soon and get 30-50% less bright.
@Johnny_C1372 ай бұрын
No. You buy the right angle connectors for LED strips, cut the strip, plug each cut end into the connector, and make a super clean, flat connection.
@yayeggs Жыл бұрын
Protect this dude at all costs Also - the second I found this out with my Govee lights, i kicked the wall and made a hole. Currently patching the wall.
@driggsy Жыл бұрын
😌😌😌
@gabicreightonbooksetc. Жыл бұрын
😆😆😆
@awanefazishraq712210 ай бұрын
🫡🫡🫡
@yayeggs10 ай бұрын
Patched - I’ll update everyone with my patched hole with Govee lights and sensor to kick off the color and my tea maker maker haha
@okashi108 ай бұрын
@@yayeggsYou really did kick it off lol
@floatingpeaks45842 ай бұрын
You don't fold you, use a T connector
@MiccoNoelCBatul23 күн бұрын
L indeed
@Noah321...Ай бұрын
I might of already done mine and deleted the R in RGB so now i have GB lights on half my strip.😅
@Haru_no_ki3 ай бұрын
My nanoleaf 4d comes with some corner things that really helps this process and eliminates the risk of cutting the electricity to the rest of the band. Really useful plastic
@TechGuy7957 ай бұрын
Thanks Bro That Really Helped Me Out! Subscribed And Liked :D
@Casual562210 ай бұрын
Thank you so much man! I just installed my first led lights, I had them for a while but never got the chance to install them. This video helped me so much! I was wondering how to fold them properly. Thank you so much. 👊
@benrogers58457 ай бұрын
The algorithm is bringing me your shorts nonstop 😁👍 good stuff
@driggsy7 ай бұрын
Algo W 🥹
@jasonjtg217 ай бұрын
Perfect fold! Also cutting and getting the 90* angel connectors works great as well (assuming the RGB you have is cuttable)
@bb.connie Жыл бұрын
OMG TYSM SO MUCH UR A LITTERAL LIFE SAVERR
@driggsy Жыл бұрын
Got you!
@josephfoster19982 ай бұрын
There's usually a line where you can cut the strip and solder some short wire lengths if you want to make sharp bends.
@anabeastish9 ай бұрын
Randomly useful video of the year
@gabicreightonbooksetc. Жыл бұрын
Oh man! I wish I’d seen this video before I installed mine. Yours is nice and tidy. Thanks for sharing.🌸💕
@driggsy Жыл бұрын
Now you know for next time!
@gabicreightonbooksetc. Жыл бұрын
@@driggsy You bet.👊🏽
@Mr_Cosmonaut Жыл бұрын
This helps a lot as I’m planning to get some RGB light strips in the next few months!
@driggsy Жыл бұрын
Sweet!! Ever since I learned how to do this I used the same method on multiple projects and it works like a charm 👌🏼 Glad I posted this!
@TintiKili699 ай бұрын
pro tip: use SK6812 Led Strips
@foxgirlthememegirl1344 Жыл бұрын
Thanks I just got some and idk what i'm doing 😂
@nancynwabia52968 ай бұрын
Thanks dude this just helped 😊😊😊
@imthechampion3 ай бұрын
Thanks, I really needed to for this for my gaming room, and nearly destroyed the entire strip. So thanks (a lot)
@haltertopbabe7 ай бұрын
next time 💀 seeing this over a year after installing mine, and at that time the other videos i watched weren't as to the point and i was too excited to wait 😂
@user-dm6fv8mi9q4 ай бұрын
Wow genius! Thanks dude
@driip_2 ай бұрын
😭 it’s so obvious and somehow i couldn’t figure that out wow
@bentley4812Ай бұрын
Thanks this helped me
@mogulmommynetwork94755 ай бұрын
Worked great thanks ❤❤
@driggsy5 ай бұрын
Glad I could help!
@Bonjour-m5o7 ай бұрын
Thanks God I see you before I instaled
@driggsy7 ай бұрын
Just be careful and don’t bend it too hard!
@LokelyConed4 ай бұрын
I cut my strips to the right length and then solder small cables onto each connecting point so that the cable can bend without having to stick to itself.
@driggsy4 ай бұрын
If you have the time this is definitely the way to go 🙌🏼 how’d it come out?
@LokelyConed4 ай бұрын
@@driggsy extremely clean, no over laps, I do electronic repairs as a side job so I'm pretty handy with the soldering iron. Took me probably 30 minutes from unboxing to having the strips cut to length and re-soldered and ready to be put behind my desk
@driggsy4 ай бұрын
@@LokelyConed Love to hear that. Having the background is very useful. I bet it was a fun project! Enjoy the clean looks!
@LokelyConed4 ай бұрын
@@driggsy very fun indeed, now I just need to make sure I don't spill a drink down the back and short them again 😅
@driggsy4 ай бұрын
@@LokelyConed hahah definitely don’t want that!
@1SagaciousMage11 ай бұрын
Important to note he's in the middle between the LEDs. The closer to the bulb the higher the risk of causing separation of the bulb from the circuit. Not fun.
@user-bc3zs2wn5z4 ай бұрын
You’re a clown.
@truevegasАй бұрын
Thank you sir! No more arced edges for me 😊
@NicoleRAINMusic3 ай бұрын
Thank you for this video, it was sooooo necessary!!!!
@BigCheeezer3 ай бұрын
Thanks, Mizkif!
@juliemeyer63449 ай бұрын
OMG THANK YOU I HAVE BEEN STRUGGLING WITH THIS YOU DONT KNOW HOW HAPPY THIS MAKES ME SUB ADDED
@driggsy9 ай бұрын
YAY!
@user-yx2rq9mr2x Жыл бұрын
this helped thanx
@codeman72645 күн бұрын
Thank you!!!
@Gabel-6911 ай бұрын
Oh! Trank you!
@SoCalix5 ай бұрын
Sir, you just saved me such a massive headache before my new govee lights got in
@mrjarju3311 күн бұрын
I feel like a fucking engineer putting up leds
@amarudi5160Ай бұрын
Ty bro that was my problem with led strip
@troglodyte9686 ай бұрын
I learned that from my teacher in 3rd grade super helpful
@joeclifford1833 ай бұрын
They make 90* corner crimps for this purpose. It requires one cut and you’re basically done, they don’t cost much either. Source, I’m an electrician and do these often.
@emmanuelcarrasco66442 ай бұрын
Unfortunately they don’t work with rgbic. What a dilemma I’m in
@beukneeq57662 ай бұрын
yoooo...niice tip
@xolo_xd66156 ай бұрын
The vid i've been waiting fir a longgggggggggggg time
@dragonslayer62152 ай бұрын
I honestly would get corner clips for these types of things because i feel i would peel it due to my need for constant fidgeting
@KingChaos77710 ай бұрын
This man saved us a lot of pennies
@driggsy10 ай бұрын
😎👉🏼👉🏼
@PresidentJorgeBush9 ай бұрын
Nah down the road, it's gonna get ruined, no long term thinking, this jackase is hungry for contents loll
@boredindahouse48187 ай бұрын
Ur literally gonna break ur lights doing this
@DenjQ26Ай бұрын
Watched this 3 years after my rgb strip has been installed 🎉
@Ilumeplaycurtainlights6 ай бұрын
Nice led lights🎉
@driggsy6 ай бұрын
Thank you!
@Khl17_5 ай бұрын
I just finished installing them and i now see this video on my fyp 💀
@spiderprowler9644Ай бұрын
Dang, I wish I saw this before I put mine up
@EkvoriviousАй бұрын
Careful not to snap one of the bulbs though.
@HDK79 ай бұрын
How’d you put on your tray fr your flexispot frame, just to cover the controls for the lifters, it’s confusing me
@someguywithalife7525 Жыл бұрын
can this affect the led lights working, and also does this method work with rgbic?
@teentrillionaresigma4 ай бұрын
Yes it does I lost blue, pink and some other colors due to this
@Jakereviewsall9 ай бұрын
Better just to buy the little connectors you can get and just splice away.
@reign977110 ай бұрын
Ohh very nice, saw this after I installed mine. took too much time soldering that rgbw. I died watching this.
@NikkeiZX2 ай бұрын
There are dirt cheap RGB connectors for this exact purpose, because you're not supposed to do this...
@zakpriestly61284 ай бұрын
I literally figured this out myself so long ago. 😂 it's common sense
@user-bc3zs2wn5z4 ай бұрын
Please use a diffuser on LED strips. Especially if they’re going to be visible. Nothing cheaper than having plain RGB strips on the wall
@Tuttomenui6 ай бұрын
Like folding IDE cables but smaller.
@Quorented4 ай бұрын
10 loops and hoops later its in the right direction. Defo didnt waste 5 inch
@inzinity2 ай бұрын
Went from haha to poggers to oh real fast 😅
@julesbourban16503 ай бұрын
govee lights, great choice
@clxntion6 ай бұрын
all fun and games until your standing desk recalibrates after a power outage definitely didn’t happen to me (yes it did)
@AManCalledDutch5 ай бұрын
Legendary
@DaironFrias11 ай бұрын
Thanks.
@_peki_8 ай бұрын
Useful👍
@noamizraeli175410 ай бұрын
It’s not dangerous to fold the RBG when the light are on? It’s not ruining the RBG?
@yaseemanac7 ай бұрын
Great one.
@ajitb8764 ай бұрын
Woww.. what a hack 🙏🙏👏👏
@GrayAcZАй бұрын
Thanks g
@user-ss9wg6uc4l3 ай бұрын
Cut it then rotate it and apply back on to the contacts and you don't have to fold
@souldlab11 ай бұрын
ผ่านเติ้ล ❤ ค่านอน
@Atomic_think2933 ай бұрын
I didn’t know u could do that cus I thought the govee RGB was very delicate and I already installed mine I didn’t know about this till now😂💀
@wiscowild736911 ай бұрын
Just buy the corner connectors
@MFA20003 ай бұрын
I got myself a philips hue lightstrip it can be cut and then you just turn it like that then you put some device that connects the two ends so it works again
@keishaloves17623 ай бұрын
Lovely I see this after I installed them 😭
@arthurkechere80049 ай бұрын
Thanks bro
@miki4p7 ай бұрын
Justo lo que estaba buscando ❤
@jonl48026 ай бұрын
Ugh I didn't properly do this. . I'm going to re-do 😮. . Thanks .
@amazingmation976 ай бұрын
Dont do this it breaks the lights, buy a connector off of the internet or follow the instructions with the lights its safer!
@matthewgamman43033 ай бұрын
is rgb a noun now? and not used the same as a color, an adjective?
@P1ll_KАй бұрын
this can also damage the strip, so be careful with it. or just use a floating bend.
@wyatt_73956 ай бұрын
This works until the strips been like that for over a year n the bend finally cracks. It always did that for mine I just got the corner extenders
@6.3-JC2 ай бұрын
“Prefect bend” 💀
@nowknow3 ай бұрын
Umm, really risking breaking the RGB by doing this but if it works it works. The proper way is to cut the strip, place it how you want and solder on the wires again to bridge the cuts, you can cover that up with tape. They also make really easy 90° joints you can plug the cut ends into if you're less electrically inclined. You can also just leave more room and not try to have such a tight bend, crimping it like that risks damaging a diod or resistor.
@rammohanmahakud80844 ай бұрын
I think even if we fold the strip directly, it would be folded in the exact same pattern
@alenxadro_patro11 ай бұрын
It helps... but the double side tape on my rgb strips r suck💀
@rowdygoose84823 ай бұрын
They have corner connectors for this... Cheap and simple to use
@kashmooney29226 ай бұрын
Some lights dont like that lol i do a loop and then go which ever direction i need to after
@muzzy40392 ай бұрын
Cool, but how do u stop it from falling off the bottom of the desk after 2 days
@kuyasweazy7 ай бұрын
i just literally installed mine few hours ago and this shorts just randomly appeared after i installed mine
@CarpeUniversum8 ай бұрын
Instead, get a strip with more solder points, cut them, place them at 90 degree to eachother, and just solder tiny wires between the connections for your corner. Cover with some tidily cut tape if you want...
@Zender-3 ай бұрын
me watching this 5 hours after installing rbg strips: youtube... WHY
@endofps73187 күн бұрын
Watched this 2 weeks to late 😂
@g2jnan4275 ай бұрын
Mine have a clear silicone coating making them unbendable like that.