Tip with the paper clip is the tip of the year for me. With other methods shown on youtube I was not able to get the first bearing out. I have been thinking about how to achive the same thing you have with the paper clip, but your method is far more simpler compared to what I've been thinking about. Paper clip method worked for me for the first time. Thanks a lot.
@bladerunner306 жыл бұрын
Thousands of thank you!!! More than one hour trying to remove the bearings of a 2205 motor. Your tip was just perfect!!! Thank you Thank you, thank you a lot!!!!
@thgilne50603 жыл бұрын
Yes sir! I have so many motors im going to fix this week. Harbor Frieght to the rescue! Thank you sir!
@NamNguyen-ch5xx7 жыл бұрын
thank you!!! You saved me so much time just now. I had to completely stop after getting the first bearing out to say thanks.
@thejswaroup7 жыл бұрын
dude . you r amazing . such a awesome trip to remove the bearing. I took hours to remove one. after seeing your video it just took 30sec to remove. thanks a ton . good luck
@PuttingOnTheFoil7 жыл бұрын
Brilliant! Humanity would be lost without paperclips.
@lobomondo72665 жыл бұрын
Nice trick with the paper clip. I don't have an arbor press but a bench vise and a scrap piece of wood with a hole drilled to accommodate the paper clip worked great for me. Thanks for the video.
@lobomondo72665 жыл бұрын
Awesome trick with the paper clip! I've used it several times now. Thanks for the tip.
@kormitigrov6 жыл бұрын
You saved my day with a paper clip! Thank you!
@0012dominic3 жыл бұрын
Thank you. That is a fantastic idea. I just amended it slightly to gently tap the screw through (no drill press). Worked a treat.
@angeliepaul94477 жыл бұрын
best way to pop out bearing I hve seen compared to all other videos over the net
@tsangnl6 жыл бұрын
Of all the methods I have seen, this is the best!
@TorqueRoller6 жыл бұрын
Nice! was just struggling with some Lumenier 2206 motors, super tight fit, that paper clip idea is right on! Gotta try this. Thanks for sharing!
@Capitaine_France7 жыл бұрын
best way I saw on youtube GREAT !!
@spinz76087 жыл бұрын
Wow luminer! This help me a lot, thanks for the tutorial
@Michael9W3 жыл бұрын
Works well even without the press. Cool
@MrApru18 жыл бұрын
a drill press makes a good light duty arbor press. been using mine for a long time to remove and install bearings.
@timnilson8 жыл бұрын
Good idea!! It would perfect for this application.
@MrApru18 жыл бұрын
+Tim Nilson yeah, a drill press is more expensive than Ann arbor press but much more useful. You can get small cheap ones now.
@Armand9x5 жыл бұрын
This helped me greatly, thanks!
@mordinkainen18444 жыл бұрын
this was very helpful!
@BHARGAV_GAJJAR3 жыл бұрын
Arbor press is something we all take for granted everyday
@juz708 жыл бұрын
Excellent. Thank you
@sickswan617 жыл бұрын
Great vid any ideas on how to remove the stator on a days 1102 motor.. I have twitchy motor syndrome and it’s not the esc or solder joint at esc so I’m thinking it’s where the wires connect to stator?..
@1kleineMax14 жыл бұрын
OMG the last time i did this i was using a small 2mm shaft slightly at an angel in the hole to get the bearing out. This was way to hard cause it jams it more then pushing it out. This video was there befor i tried id, but some how google didnt showed it to me ^^ NOW im on for some bearing changes!
@SimplexVeritas1198 жыл бұрын
Does getfpv have replacement steel bearings for the lumenier 2206-11 2350kV motors? I saw that they have a lot of tiger motor bearings and if I am not mistaken, tiger motor company makes most of the Lumenier motors. Do any of the tiger motor bearings work as direct replacements?
@andki2347 жыл бұрын
Any supply in Europe for the bearings? I do not need ceramic ones....
@AAronFpv7 жыл бұрын
Excellent video fought for a while until I tried this method had bearing out within a few minutes! Took longer to bend the wire
@كثيرالطيب3 жыл бұрын
مدهش🇰🇼
@nerdCopter4 жыл бұрын
+1👍 💪
@twincamcody49965 жыл бұрын
Oh yeah cause everyone has a press to use, show use a field technique!