How to Build a 3D Printed Ghostbusters Proton Pack: Part 7- Cyclotron Lenses

Today I'm showing you how I make DIY Cyclotron lenses on the cheap for your 3D Printed Proton Pack!
Frosted Glass Paint: amzn.to/40LKg8a
Testor's Transparent Red Paint: It's cheap at Hobby Lobby $3
Want to buy your materials and support me in the process? Use my links!
Ender 3 Printer - amzn.to/3vq5X1t
CR-10 Printer - amzn.to/3RCIaTD
Sandpaper - amzn.to/3uZjPzH
Filler Primer - amzn.to/3GIeYFP
Texture Paint - amzn.to/480Arpo
Paint -amzn.to/4fD9Dzj
Hex Screwdriver Kit - amzn.to/3BXeaxJ
m3 Screw Kit - amzn.to/4dXwmVa
Disclaimer: The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to you!

[@AxelSedler]

First I made red ones, too. I chose acrylic glass. But since I'm using arduino and MikeS's code, I had to swap it for normal lenses. Unless you don't use the different modes of his code, you will find that any other colour than red won't work. The hard way. 😅

[@wholesomejoe]

I don't care too much for the other modes. If you want to do the other modes you need to have frosted lenses with no color, or I've seen some people use dark black lenses. I actually have the other modes coded out of my code on my pack so it only does the classic mode.

[@AxelSedler]

@wholesomejoe Fair enough. I've changed the themes a bit. Meson now sounds like a big taser instead of the pew pew sound and the christmas mode is a DOOM mode now. 😁