How to build a DIY electric powered fat bike with car tires start to finish

[@hennybutabi]

Let me know what you think in the comments below :)

[@sheanyquist]

Yo, awesome build!!! Your getting me motivated. If you wanna cross promote, I can post your link on my diy ebike video (500k views). Just add my video link at the end of yours then let me know

[@victoriacorner8444]

Did you link the battery's in series while they still had their own original bms's? I'd love to know as I'm trying to build I high voltage battery without forkin out a fortune for an already built one.

[@Kenshin0001]

Love it brother.I wish I could have your skill.

[@Iசிங்கம்]

Awesome ❤️

[@BITE_MECHANISM]

What I think? You got drawings and parts list? This thing is amazing!!!!

[@jaspergross6866]

Like the design. I've ran 150k+ miles running car tires on my motorcycle. Front and rear. Never once had an issue turning.

[@baldwilliams3199]

It's funny how I watch these episodes of DIY builds and the whole time I'm thinking, I can build that. Knowing damn well, if you gave me all the parts laid out, I wouldn't be able to do it. Outstanding job on this bike. Very impressed.

[@mikethatguy27]

Your Honesty gets you this 👍 and 💯 Honesty on the internet is unseen these days! Lol 🙌✌

[@powrepunch4938]

If you really had all the materials and tools you would at least try to build it. Interesting thing would be how far you get. I think I would massive problems with electrics and all that wiring... I never really tried to understand though 😅

[@marianonavalmoral4934]

@@mikethatguy27 ñp9

[@mikethatguy27]

@@marianonavalmoral4934 ñp9 👍

[@iamtheonlywilly]

🤣🤣🤣

[@b.v.g.feddie8667]

I wouldn't consider this as a DIY project, due to your level of knowledge, experience, and amount of machinery, but definitely is a marvelous peice of machinery there.

[@СтарыйМерин-ц8ч]

И ВСЕ СХЕМЫ И РАСЧЁТЫ ДЕРЖАТЬ В ОДНОЙ ГОЛОВЕ, БРАВО МАСТЕР 👍ОТЛИЧНАЯ РАБОТА,Я ТАК ПОНИМАЮ ЭТО ГЕЛЕНГВАГЕН 2Х КОЛЁСНЫЙ

[@EugeneMechanisM]

so big square tubes there.. that was a good place for the batteries.. inside the tubes..

[@chrisgenovese8188]

I made the surprised Pikachu face when I realized this monster was bolting two hub motors together. This was an awesome build!

[@BTDT74]

it also looks like you need to be doing "Lawn videos" also. Your lawn is flawless! My hobby or passion I guess I should say is working on my lawn and trying to make it look nice. Always trying to reach the next level of beauty in the yard. Great job on the build!

[@hennybutabi]

Thanks man that means a lot, I do my best to keep it green and clean😏

[@badsanta7356]

Do you also yell "get off ma lawn" to people sometimes?

[@ofreflection]

*Давно слежу за самоделками этого парня и он продолжает удивлять своими уникальными электромоделями)*

[@dfgadasgag4396]

Посмотрите канал robotodatel, там тоже по электротематике много чего интересного есть )

[@ВасильКулик-н6ю]

Скажу так цей Кулібін просто молоток👍👍👍

[@small-china]

выглядит круто, спору нет. но рулевая дрыщавая совсем. не для такой конструкции. долго не протянет

[@LexMetaller]

автомобильные колёса это худшее что можно поставить на одноколейник. захотелось выпендриться - хоть мотоциклетные бы поставил, безопаснее было бы!

[@Cj_segr]

Да это так, чисто ради понта, или запилить видос

[@donaldmartin7109]

SO BEAUTIFUL TO SEE GREAT WORKMANSHIP. THIS IS THE FUTURE. THANK YOU FOR SHARING.

[@RadiantFreeEnergyResearch]

Your ebikes give me an idea. Remember those really nice looking harley davidson show bikes, those motorcycles that had a really wide rear tire, and long stretched front forks to some degree. please build an ebike version of the harley davidson show bikes. that would be so amazing. you are so good at building! a true master of the tools and creating!

[@alexk7572]

very nice built! Just a tip: use motorcycle tires on those rims, it will ride a lot smoother(especially leaning over for steering).

[@nothingsurprisesmeanymore]

Can you get bike tyres that wide that aren't £300 each though?

[@f4tboy99]

Maybe it would simpler to use a small motorcycle and convert it !

[@jerryrivera7704]

If he puts motorcycle tires it beats the whole purpose u dickweed 👊👊

[@Debbiebabe69]

its a FAT bike, motorcycle tyres are not sufficient for a FAT bike. If you are not familiar with fat bikes, they have really wide tyres so they run well on beaches, snow, mud, etc.

[@alexk7572]

@@Debbiebabe69 have you seen the tires on the super73 or a phatfour? Both fatbikes, with tires similar like motorcyle variants 😉

[@waynegilchrist1596]

Nice looking bike and kudos for the design. The only thing I can say, that may sound negative, but it's not meant to be, is that you should have made it a Softail with shocks on the rear and on the front forks. Hydraulic brakes might be a good addition to be able to handle all the extra weight as well. I think you did a great job, it's a great idea.

[@terrellr25]

Yeah, I was thinking the same. Shocks on the front and rear forks.

[@1islam1]

@@terrellr25 🔴 What Is Islam? 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him. More ....

[@randyg.7940]

@@1islam1 I may be Islamic but I still smoke the chronic

[@RGIIIBOXING]

Wow" every time I visit this build..I hear people spending this guy's money..and This guys vision on what he wanted to build.." I'm Building a Similar Bike " The Batteries for My Build Was $2100" It's obvious that the only way im going to save money on the back IN" IS TO BUILD THE E-BIKE MYSELF" I REMEMBER WHEN I WAS IN SCHOOL..AND I HEARD OF A CAR THAT WAS FAST" COOL LOOKING AND EXSPENSIVE" ( LAMBORGHINI )..ALOT OF PEOPLE SAID..IT WANT LAST.. NOBODY IS CRAZY ENOUGH TO BUY SOMETHING LIKE THAT...IF EVERY SINGLE PERSON IN THE WORLD THOUGHT LIKE THAT...WE WOULD STILL BE RIDING AROUND IN MODEL T CARS" LOL" THE 350 CHEVY" MAN WHAT A MOTOR" NOW WE GOT THE LS" 5.3..NOW WE HAD MECHANICAL FUEL PUMP" NOW WE GOT ELECTRIC FUEL PUMPS" THEY INCREASE GAS MILEAGE AND HP? I TOLD A GUY ONCE WHEN I WAS SITTING OUTSIDE HIS STORE WAITING TO GO IN..HE ASKED" WHY DO YOU COME SO EARLY" I GET OFF AT 7AM IN THE MORNING YOU DON'T OPEN UNTIL 9AM..I TOLD HIM" I SHOULD BE ABLE TO DRIVE UP TO A MACHINE OR A SYSTEM IN YOUR STORE TO GET A MOVIE 24/7..HE SAID" Naaaaah" This IS THE FUTURE.. VIDEO WAREHOUSE AND MOVIE DEPOT" THAT'S A TRUE STORY.. ALMOST 7YRS LATER... ( RED BOX )??

[@RGIIIBOXING]

My POINT IS THIS.. EVERY ONE WANTS TO TELL ANOTHER PERSON HOW HE SHOULD HAVE BUILT HIS OWN DESIGN..OR AS I LIKE TO TELL PEOPLE..WHO LOOK AT THINGS I BUILD" YOU WANT 2 SPEND MY MONEY ON MY PROJECTS" I DON'T THINK SO" ITS NOT THAT SOME OF THE THINGS I HEAR DOESN'T HELP" BUT IM NOT BUILDING YOUR IDEA..OR YOUR SCHETCH ON PAPER" YES" THINGS CAN BE IMPROVED..OVER TIME" WITH FAILURE COMES PROGESS"

[@prostosergik]

Amazing build! I was expecting you to put all electronics into the frame to make to disguise this bike EV nature though. There is so much space inside of that tubes!

[@hennybutabi]

I preferred to do that but unfortunately the controllers and batteries I wanted to use did not fit in the tubes

[@prostosergik]

@@hennybutabi have you thinking about custom batteries? I don't think hiding controllers can be a problem, they are pretty small already. Or the idea to hide all into the frame is out of you scope?

[@zachm.3049]

@@prostosergik Yes please! Frame battery build also came into my mind. Just hope it has enough space to fit enough Wh capacity

[@mrbnoo6031]

I want one 😊 Dont know if your with them or not but AMG MERCEDES needs to include you in there design Department great talent sir

[@ricardog.p2610]

just a gem of DIY, possibly a little stiff without suspension, perhaps a central spring or one below the handlebars would be awarded

[@fredgonsalves7407]

A very skilful man with the right equipment and huge imagination. Awesome work.

[@neilfranklin5644]

To think the early car engineers begun just like this

[@CYV_COV]

Step by step make a DIY electric powered fat bike with car tires is really amazing. You have brilliant ideas and a high level of art. Very inspiring. Thanks for sharing

[@Highspeedfutzi]

Oh boy I always wanted to know how to build a DIY electric powered fat bike with car tires! Thanks algorithm gods. 🙏

[@lego9274]

Радиус разворота сколько? Как у того же мерса АМГ? А тормозной путь? Тоже как у мерседеса тонну весом?

[@SophiaAphrodite]

You spent so much time thinking about if you could. You never stopped to think if you should.

[@HermanMunster420]

Are those brake discs enough to stop it? Seems like a set of motorcycle discs would be better for the weight of the frame and the size of the rims.

[@cerealkiller4248]

These type of builds are going to be the future of us getting about. A comfortable cruiser capable of 30mph up a slight hill is all we need with a top speed of 40mph. I love this one 👍👍👍

[@loafandjug321]

You could make $18 million profit If only 0.5% of your viewers bought a DIY kit to build this bike.

[@studyoflife7]

Can you make more motor for it, and sell to us 😅

[@kaox44]

The build is really cool. Yes, the bike look super cool. Yes the bike is out of balance with those big wheels and frame. Lighten up the frame design with balancing steering and adding a more powerful motor/brakes would help.

[@TheAbsolutShame]

This looks better than any ebike I have ever seen! You should patent the design, make the needed legal changes and put this on the market. I would definitely buy one or donate.

[@Nobody-Nowhere]

I like how all of your designs have a clear design language, even though this is probably a horrible bike.. it has an unique look to it.

[@МихаилИванов-з5щ]

какие параметры получились??? вес, скорость, мощность(разгон), дальность хода ...

[@КонстантинНакцев]

Это произведение инженерной мысли и индустриального дизайна , а не тачка для подвоза картопли на рынок на каждый день ... У парня мастерская , как колхозная МТС по оснащению , зачем заморачиваться за пробег на дохлых аккумуляторах . Если мало энергии , нарастит багажник , или приделает прицеп с полезной нагрузкой до 500 кг и мощными батареями на 1000 км ...

[@adamt.3857]

I love this project from start to finish, outstanding skill and craftsmanship!!!! I think I wanna have one , too💗💗💗💗

[@vicksonshinobi996T]

Thanks!

[@hennybutabi]

Thank you for your support👍

[@vicksonshinobi996T]

@@hennybutabi welcome

[@NesolitS]

This is truly a futuristic work of art. My sincere admiration.

[@BillyComadreja]

The project is excellent, the construction work is neat and beautifully finished. It would be important that its weight is less, so that the battery lasts more miles.

[@angeloc700]

Very cool…but I can’t imagine those brakes are doing anything to stop quick…. But very cool!

[@skizzysmith1146]

it looks great. Very well made. Question 1. How does it ride over bumps without suspension ? Q2. Top speed ? Q3. Range on a charge ? Q4. Total cost ? Thanks, a great video.

[@sprz97]

Yeah I’m thinking it must be a really rough ride

[@kehejeanjacques8534]

yes i though the same think while reading the video , may be we can had a seat made whith suspension like with the oldies harleys davidson or bmw motorbike .

[@powrepunch4938]

@Rocky Thacker I don't think so. Try roll a tire and turn it left or right. You don't need that much force to do it. But it probably is more difficult than a steering a bike.

[@rameshchadrapatel3448]

Also need fender else will spoil your clothes while riding in water puddle.

[@borisb5163]

Try that again with 40kg pressed on.. Becomes harder. And for turning on a bike, you need to ride on the side of the tire. Riding on the center and turning is also possible, but only at speeds below 3km/h. So not feasible for bike riding.

[@TheSocialGamer]

WOW! The level of design is mind blowing. You are above highly skilled at your craft.!

[@jospaulsambooken7656]

Bro I want to ride that, awesome bike great idea 😍

[@ctvtyctvtyjd6023]

Советую из стекловолокна сделать крыло на переднее и задние колесо-что бы в сырую погоду быть чистым и будет супер

[@thzzzt]

Probably not the apex of efficiency, but sure looks durable. You'll never have to worry about bending a rim.

[@kolecersukamakmurbogor418]

💓💓💓💓💓👍👍👍👍

[@shantor100]

Then again nothing electric is efficient

[@geemy9675]

@@shantor100 neither is your trolling 😉

[@shantor100]

@@geemy9675 😆😆😆

[@themeritmerit]

Bravo 👏, c'est magnifique, elle manque de système lumineux

[@АлексейЧистяков-э2ь]

В карелии ночи белые а зимой не покатет если только механика да

[@tonydalton6756]

Excellent work. As a fellow engineer I think I would have put a tensioner in the drive train & used aluminium for the frame. I'm going to build my own electric trike one day (It's always one day 😅)

[@akirakurosawa2791]

beautiful job. the only missing parts are dampers. i am sure the next version will be super bike. great job man

[@TERRYB0688]

Henny, nice cool design, must weigh a ton lol, should put it up for offer, would be interesting to see how much it would go for, nice fabricating 👍👍👴🏻

[@donsmith4111]

Awesome build ! Great use of used wheels and tires. You are a true craftsman .

[@MakeitExtremeShorts]

Nice job dude! :)

[@hennybutabi]

This means a lot coming from you😏. I am following your work for years now and a huge fan of your channels👍👍

[@welshdave5263]

I wondered if I would see you here, I loved your fat bike, but now I have to try build this one instead.

[@davoodehajiraj]

It’s nice to see u watch and like what I do I love every single project of make it extreme

[@dikhiananta8160]

Saya penggemar anda berdua👍 good job. I'am from BALI🙏

[@aissahanggraini5716]

@@welshdave5263 xx dengan

[@apeqa6222]

interesting.. can enhance with suspension or shock absorber..

[@АндрейЖарких-о2х]

Корч классный. Респект. Руки откуда надо растут.

[@stefanogizzler]

This is a phenomenal build, a culmination of excellent design and fabrication skills, keep it up. If that's on offer I'd buy it, Really cool stuff, Tuned in from the UK Midlands.

[@TheoFennel]

Trust one of a kind rolling down Oxford Circus or Hyde Park

[@КонстантинМельников-л7ы]

Give some specific numbers - what weight is it, what speed is it, what mileage on one charge, how long did it take you to do this gorgeous piece of art? How you will replace braking pads or disc if your braking calipers is welded to wheel hub?

[@amaurysilva9712]

Projeto INCRÍVEL! Porém o amigo aí, tem um SENAI em casa , um simples mortal com suas "ferramentinhas"faz não !!

[@KASSOR0123]

Saludos desde Argentina. Excelente. Muy bueno.

[@Zeioth]

I'm breathless. This is great engineering.

[@hakannedjat]

Excellent build! Love it! I would have liked to see internal wiring, and with the weight of those wheels I'm not sure those small disc brakes will be doing much.

[@bjelliott2887]

There's a reason why you never see him come to a stop. 🤣

[@olsonspeed]

Wheel diameter is about the same as a bicycle wheel, the brakes will work just as effectively.

[@genephipps6421]

@@olsonspeed he mentioned the weight not the diameter, and his point was not without merit because all of that rotational mass is essentially a big flywheel or energy storage system. That said, given enough stopping distance I am sure they will eventually get the bike stopped. Obviously they won't be as effective as they would on a regular bicycle tire.

[@Hoggdoc1946]

@@olsonspeed Nope the rolling weight of the tires and wheels come into plat as well. Mechanical bike disc brakes may slow a bit would not want to depend on them to emergency stop that very heavy bike, Also the motor is seriously under powered for the size and weight of the bike., But I don't really think he built it ride.

[@TAPORZZ14]

Yeah I think it doesn't make sense to have car wheels/tyres... The extra weight and friction must kill the battery so fast.

[@ManishWayz]

Amazing! This has to be the best electric bike build I have ever seen!

[@DerRitter90]

It looks seriously. How long distance can this bike take with full charge without using the pedals?

[@hugoricardoortizvaldivia3419]

Muy buena tu innovación de colocar dos motores juntos....dime las tuercas de los tornillo no chocan çon el bobinado del motor???. Gracias por la respuesta

[@chawpino8320]

Cool man. Suggestion: For your next project, put some bicycle wheels on a Mercedes AMG.

[@jessehavok4181]

That thing is cool. I wish I had the resources to build something like that, myself. I've made a tadpole trike out of square aluminum tubing, but it was all bolted together. I never trusted it to not break, so I never rode it. lol

[@ioannischerouveim7239]

All I have to say, this is an amazing build! My advice for such a heavy ebike 80-100 kilos is to upgrade to at least 10.000 - 15.000w motor with a good controller and big hydraulic brakes. Then you will have the fun of your life 🙂

[@Rendraco79]

exactly.

[@grantadamson3478]

Then put in a very good suspension seat post. Those tires will make for a very harsh ride and cornering will be a major issue.

[@jerryrivera7704]

It's a concept bike ..not for retail..u dickweed..👊👊

[@Traderhood]

Yeah, but cost of this bike was probably around $300.

[@needparalegal]

Thank you so much, I had been trying to figure out a way to rig a suspension like this for years!

[@eugeneli1952]

Four words...Masterpiece, five thumbs up👍👍👍👍👍. But it is an expert diy😂

[@jobspeedmms]

including this brilliant idea, bro, from ordinary bicycles to electric bicycles

[@HoloScope]

You seem so prepared and like you know exactly how you're going to do the project. Do you make like sketches of the dimensions and stuff before you go ahead and do it? Even with sketches I'm sure I would mess up terribly.

[@mihalym.6876]

This kind of project can not be done without CAD software properly. Nearly impossible to achieve the necessary tolerances for the whole build, especially for the drive system.

[@calholli]

@@mihalym.6876 How silly. lol... You could easily make this without even having any plans... The only real tricky part would have been, at what height do you put your pedals--- but then you could just measure from the existing bike and get you in the ball park, easy... The rest is very simple... Stand up a tire, start at the hub and simply angle your piece so that it misses the tire---- the precise angle isn't important, just as long as it clears the tire..... The motor he used is an already existing system; and it's not even that important where you mount it, just as long as your chain is in line--- You can always adjust the length of your chain to match what you've built... I literally can't think of any reason to do this in CAD

[@oscarjimenezgarrido7591]

@@calholli The Wright brothers would've loved to have you around.

[@jrobertson7352]

@@calholli 1

[@sickickmidou8012]

U8

[@youarepredictable]

Step 1: Acquire and stock a full tool and fabrication shop and learn and perfect skills of metal fabrication and welding.

[@Cdub0619]

Very cool project! I would have considered running all lines in the frame and perhaps the batteries and controllers after seeing the comparable shape.

[@PlayToDIY]

It’s beautiful, thank you

[@nicolarollinson4381]

I don't see it catching on in a big way but that means it will always be unique.

[@lekma9580]

nice job missing the hydraulic brakes. and shock absorbers and a front and rear motor for a better distribution and finally front and rear lights with brake light without forgetting the step sensor for safety

[@williambourn4799]

?

[@Traderhood]

That’s an excellent fun build. Great job. I was wondering what your thinking was on gearing. One of those 350W motors has slightly over 10 nM of torque. So with 2 of those motors you’ve got 20nM. Which is excellent for such an inexpensive and small motors. Were you aiming for more torque or more speed with your gear ratio? I would like to hear your thinking on gear ratios.

[@hennybutabi]

I just winged it and it turned out perfect😏. I had some other sprockets on hand but I did not need them.

[@chriskautz3245]

Cracking work.. Awesome build . maybe an alloy frame next time would save some weight . Would love to see a 3 wheeler /trike build ( 2 steerable wheels at front ) . Keep up the superb work .. Subscribed as your bloody Awesome

[@Stuff-i-Like]

Also prob put battery lower in the main triangle. Whats the mileage on a charge, average riding etc?

[@danlee831]

Beautiful work, what talent, looks awesome 👍😎

[@Power5]

This is a truly amazing build. Great work. Well beyond anything I could ever do as I have none of these tools or shop. My design critiques if you want to read them. Giant frame could have easily housed the wiring and stuff. Handlebars just look like some off the shelf item which is unfortunate since the bike looks amazing. Then the small details are also a bit unfortunate. The kickstand bracket, the battery tray how it attaches to the frame, and things like the motor mount and brake mounts are just 100% functional with no design. I love the shape of the frame. I wish that you had used a simple square tube for the battery holder mount attachment to the frame. Just have a square tube off the top of the seat post part of frame, parallel and level with the top bar and have seat post go through that square tube. Chop off that extra bit on the front fork that sticks out to the left of center.

[@Power5]

Build quality, not concept. I critiqued many aspects of it.

[@bobbybanks7554]

Fantastic vision job and accomplishment!!! I'm totally inspired and motivated to buy...Job well done man down to every meticulous detail. THE Power Of The Mind 🤠

[@draufgesch5215]

Again well done, but why not as 2 wheel driven bike with 2 small direct drive wheel motors. So you could also recuperate when braking ?

[@munoescabar9127]

This is why it's important to have All type of Tools this is so Kool great job 💪💯

[@Sergey-Alekseenko-qk6mf7te7j]

Колёса, всё же, надо выпуклые, на плоских тяжко будет в поворот входить.

[@dfgadasgag4396]

Зато по прямой ехать ровно 😁

[@dfgadasgag4396]

@имя отсутствует точно точно

[@jayswarrow1196]

Помоему, кто-то не досмотрел до обкатки. Автор спокойно перестраивался и разворачивался. Или вы надеялись что он на этом катке сотню по трассе даст?

[@dfgadasgag4396]

@@jayswarrow1196 ну да 😂

[@Sergey-Alekseenko-qk6mf7te7j]

@@jayswarrow1196 Я досмотрел. Но я не пробовал на таком ездить и мне почему-то кажется, что будут интересные моменты как на малой, так и на бо́льшей скорости при попытке повернуть и/или «положить» его в поворот (для сохранения равновесия).

[@JunkieVirus]

as a bike mechanic I would have done some things different. first, eccentric bottom bracket this way you can tighten the chain. second the sadle a buddy sadly would have looked more nice. a more powerful single unit motor. and a belt system. besides that very awesome build. even with the components you choose.

[@nicolapellegrino1072]

Lol and what about the rim/tires? 🤔😬

[@Ад-Дин]

У цепной передачи выше КПД чем у клиноремённой! А вот крыло поставить над колёсами -- не помешает!

[@geraldobavana5248]

Bonito trabalho, acredito que ficaria maravilho se for integrado amortecedores!

[@tonysantiago3159]

you still make that type of bicycle I would love to buy one from your workshop

[@Zaaxun]

Looks really cool but will the size and weight of the tires chew threw battery time. Good for short runs.

[@alexbatista2119]

Não tenho outra palavra para definir este trabalho PARABÉNS!!! Fantástico! Projeto lindo! Sou fã da Mercedes-Benz AMG. Vc representou com maestria a marca AMG. Uma pergunta: Qual motor elétrico vc usou? Vou mostrar seu projeto pra oficina onde trabalho pra gente fazer uma igual (claro, se vc me permitir). Kkkk Oficina AOM. Um grande abraço!👍🏼👏🏼🇧🇷

[@ander8157]

Mano, o cara é europeu, faça pergunta a ele em ingles, lingua mundial kkkkkk

[@miqueiasmos1]

@@ander8157 todo idioma tem tradução!

[@Altema22]

Awesome looking build, and glad to see that I'm not the only one who thought of using back-to-back hub motors! Did the controller come already programmed, or did you have to configure for the reverse rotation on one side?

[@hennybutabi]

You can learn the controller to spin forward or backward

[@odairjosebezerra5613]

Muito bom seu trabalho 👏👏👏👏👏🇧🇷

[@carmelpule8493]

This is brilliant design and workmanship and finishing. Congratulations Considering the light w two vertical webs is fine. If the bike was meant carry more weight, as in a " cargo bike" I would have bridged those webs to form anther two horizontal beams joining the webs with the main structure so that the torque on the plate will be assisted by these two additional beams, at top and mid way of the plate.

[@RadiantFreeEnergyResearch]

Beautiful work!

[@petdealer666]

I love the video-making, how it shows a complex built in a very entertaining way. The built itself is a nice engineering exercise but terrible design. No suspension and low profile tires must make for a terrible ride, let alone using car tires on a bike which is mega stupid. This built is for the cool looks alone, more a piece of art than a usable bike.

[@Shaunymac10]

Its a terrible bike, looks terrible just because something can be done doesnt mean it should be

[@winmyint1087]

More mum mm

[@winmyint1087]

Mmmmmmmmmmmmm

[@winmyint1087]

Mm

[@winmyint1087]

M

[@joaobatistamachado6283]

Espectacular, parabéns.

[@lildeli3rddimention]

Boy, if I had a beautiful shop like that, with all those tools, I could build a flying saucer or something equally neat !! So , are you gonna put those into production ??

[@wheelmotors5316]

COOL. just thought about that u didn't put suspension system but its great!

[@barbadoskado2769]

with this, you are king of the jungle at every gathering for sure

[@Inmate533]

Gonna need a 300ah battery for this thing, just to get 20 miles per charge. That end product was sweet as hell though!

[@user619tlsdca5]

What is the top speed before riding in the uncomfortable rough bum end vibe? Notice now bike likely can only ride at 15mph to avoid the rough cut vibrations from having no shocks. Using car tires you likely need a fatter tire to absorb the bumps at least. But this project a prototype so Im sure you be coming up with the revised frame, but great looking build, just obvious it is not practical over 15mph and only useful on smooth streets.

[@Marcos97285]

You have gained a subscriber.

[@kakadi7408]

O cara tem que ser um gênio pra bolar uma maquina como essa ! Parabéns pela criatividade.

[@speeedskater]

why not hydraulic brakes brakes? I put mag wheels ( bicycle ) on a 1965 scwinn tandem bike with hydraulic . I did enjoy the build video, nice job

[@user-hd1qx2bd1r]

Heck of Build!!! Nicely Done!!! Impressive!

[@Kerros973]

absolutely amazing 👏 you have to put some speaker and play amg sound 😎👍

[@MrHandleman123]

I like how it opens with, “building the frame” and proceeds to show a bike frame meet a sawzall.

[@bertramlefarge69]

.... with the kerb weight of a Golf! lol Great vid, looks real cool.

[@caerba1969]

i like this frame and the location of the motor is nice. Do you think you need to cover that motor for water o dirt? and do know know your range? great video thanks.