How To Build A DJ Booth With IKEA Parts

Are you looking for the perfect Dj booth? Why not build your own? I needed one with plenty of storage for my record collection. This is a sort of "off the cuff" video demonstration for assembling a Dj booth/audio desk using parts from IKEA. It was inspired by something I saw on the Dj Tech Tools website. Some of the information on their site was outdated & incorrect so you may find this video to be a nice supplement. I'm no handy man so please be easy on me. #djbooth #ikeahack #djpuzzle
Check out my current setup on Instagram / bqbzro9baxz I have my decks set up battle style with a Kontrol S8 mixer in the middle.
PART ONE - Kallax Bookshelf
Let's start with the Kallax. The Kallax is the base of the desk. You can use one if you like or two if you desire a deeper desk with more storage space for records.
Two pairs of Capitas for mounting the shelves. You'll need two small square shelves for speakers and one long shelf for laptops and controllers.
Despite the daunting instructional guide the Kallax was quite simple to assemble and it took about 15 mins. Here is a complete Kallax in all of its glory.
PART 2 - Capita long shelf leg available at Amazon amzn.to/2Hqm1Xf
This bolt comes with the Capita. We'll us it to mount the Capita to the Kallax and later to mount the shelves.
Find a good spot to mount the Capita and drill a hole in the Kallax top big enough for the bolt to screw through like you see here. Let's move on. (I had a small hand held vaccuum available to clean up dust from the particle board.)
Next we'll attach the Capita to the Kallax to get a feel for how we want it positioned. I would not recommend twisting it on like I did here in the video as it will scratch the surface of the Kallax. What you should do is screw the bolt in to the Capita from the bottom with a wrench. As you can see it's quite sturdy. You could have the angle facing in or out. Up to you.
Measure where you placed the first hole and follow the same steps on the other end of the Kallax. You could place a piece of paper or thin cardboard down before attaching the Capita to prevent it from scratching the Kallax surface. I've made some mistakes as this was my first build and I managed to scratch the surface a little. I pretty much went at this guerrilla style so please feel free to do what you think is best.
PART 3 - Lack long Laptop shelf
Now let's move to the first of three shelves. The long shelf is for your laptop and controllers. Place the long shelf on the Capitas while they are mounted to the Kallax and use the sharpy to draw in guides for your screw holes on the underside of the long shelf. Now remove your Capitas and line them up. Use a small drill bit and drill small holes at the guide points so you can easily screw your smalls screws in. Do the same for the other Capita and connect the top shelf to the Kallax by lining up the Capitas to the bolts and twist the bolts in from the underside of the Kallax top.
Part 4 - Lack speaker shelves
Let's move on to the small speaker shelves. Drill a hole in through the top long laptop shelf like we did with the Kallax. We will use large bolts to connect the small shelves to the long shelf with the second pair of Capitas.
The bolts are not long enough in this case as the top shelves don't really match the rest of the desk and they are a bit thicker so I went to the hardware store to pick get longer bolts. I used the big plastic washer from the Capita bolts for support as you see here.
Now with your Capita removed do the same thing we did ealier and draw drill guides with the silver sharpy. Place the Capita dead center of the small shelf and place your guide dots. Use the smalls screws to attach the Capita to the small shelf and then connect it to the long shelf with the extra long bolt. Use a wrench to thighten the bolt. Follow the same steps for the second small shelf and you 're done.
2 X KALLAX $64.99 each
Shelving unit, black-brown
CAPITA $19.99 / 2 pack
Bracket, stainless steel amzn.to/2Hqm1Xf
LACK $14.99
Wall shelf, black-brown
2 X LACK $6.99 Each
Wall shelf, black
Shipping $99
Tax $14.31
2x bolts from hardware store $0.49 each
I wrote and produced the music in this video (except for the track I played on a record towards the end). Check out my Spotify if want to hear more open.spotify.c...

[@Djpuzzle]

For those who think the height is too low you can always add some legs like these ones from Amazon amzn.to/2VV8RVv - for me it's the perfect height. I'm 6'1 and I like to stack gear on it and keep my stuff in cases sometimes. All that can really add up to just the right height for me and I like the option of having that tiny bit of wiggle room.

[@junglist1soldier]

Exactly what I was wondering. How'd it work out?

[@Djpuzzle]

@@junglist1soldier It's great! Still rockin!

[@aigoprovata]

Best part of the video the "4 The Love" record at the end 😂. Great setup mate!

[@nugsgaming6407]

Thank you. I couldn't figure out how to attach the second set of legs. The long bolt from the hardware store was the idea I needed. My brain was tired and I couldn't think of the fix.

[@dalefraser7745]

New kallax shelf comes with frame at bottom take the height to 94 thats what im gona use then follow the rest great video

[@Djpuzzle]

Good to know! Thanks

[@256DJPassion]

I found a used Kallas for $20, and I plan on collecting more. Thanks for sharing, I know can place four tables. Well thought of sir!

[@raquelb9623]

This is amazing! Thank you! I'm going to build myself one this holiday season.

[@Djpuzzle]

Awesome! I’m still using it, holding up nicely!!

[@MikeHarrisHazchem77]

Great video. I made a smaller one from an IKEA TV unit and a bookcase. Height is perfect and I'm 6" I need some Capita and shelves. That first Tune is top btw.

[@Djpuzzle]

Cool and thanks!

[@bernercalito8422]

I like the video. I built my own to with IKEA parts and I'm very happy with the way it fits were i live and looks. I built mine about three to four years ago and it is very strong.

[@Djpuzzle]

How's it holding up today? Mine is still doing great and I moved it three times lol!

[@bernercalito8422]

@@Djpuzzle is still standing strong but I’m very careful with it when I move it around. 💪🏻

[@cutdr]

That Kraftwerk Album though.. Love it..

[@Djpuzzle]

True innovators! RIP Florian :(

[@toadscrote123321]

Looking to do something similar soon , which led me to this video. Nice to see someone with a Vestax 580. sold mine and wish I had kept it, sounds so much better than Pioneer mixers and seems really loud

[@mike._.feliciano6782]

Nice work djpuzzle. I actually have that book shelf. I purchased the casters for that added height. At 6' 1" I found the shelf as is, too low.I will look at doing that modification for my KRK's, it gives it a clean look.

[@Djpuzzle]

+Mike Feliciano Thanks. Yep I like the height but some might not. Casters are good or you could build a riser level on top. 6" powered speakers fit nicely and the shelves can support them no problem. I wouldn't go much bigger than that!

[@mike._.feliciano6782]

+djpuzzle I neglected to mention on my first comment that I actually put a longer table top on top of the shelf which added an additional 2.5 inches of height. For me, the height is just right.

[@staffordalvi1929]

This is a great idea and the video was very helpful. I'm going to try this. Thanks

[@Djpuzzle]

Thanks. Happy you liked it. Let me know how things turn out. I'm still using this over 3 years later.

[@birthdaywishesforyou]

Hi Rudie112 - Your Video Ikea Hack Dj Booth, Very Suitable To Be Applied, A Good And Inspiring Idea...

[@dnoisemaker87]

Thanks a lot. It was very easy to build and it's awesome.

[@Djpuzzle]

Great!

[@H2oward3]

Dope setup and really informative. Thanks.

[@Djpuzzle]

Thanks! Glad you found it helpful.

[@boosteredup]

Really good job, only thing is it seems a little low I would add some legs to the bottom to raise it up slightly.

[@Djpuzzle]

Thanks. Like I said to some other folks it's the right height for me. I'm 6'1 but sometimes I stack gear on it and use cases too so with all that added it's just the right height. I wanted that option. You can easily add IKEA legs no problem! Amazon has them for $19 amzn.to/2UAhmUh

[@Djpuzzle]

Check these out though bro they are cheaper and might be a better height amzn.to/2VV8RVv

[@jwickey2]

That is pretty cool great job.

[@Djpuzzle]

+Jerome Petty Thanks. It's still holding up too! Pretty solid. I've had several different configurations of gear on it since then.

[@jasonlegister2277]

Looks good

[@Djpuzzle]

Thanks. Still holding up to this day.

[@djreaction1]

Pretty solid video man. I'm going to get to this soon when I get time. I just need to find a good brace to hold two Kallax shelves together because 1 isn't going to have enough depth for battle style and have ample room.

[@Djpuzzle]

Thank you. Yeah I have two for that same reason. Mine are set up in battle position right now. Check it out on my instagram instagram.com/p/BQbzRo9BAXz/?taken-by=djpuzzle

[@JimHopper]

nice build

[@joaquinm99]

I recommend adding the washers to both sides for more support. IKEA stuff does not hold up very well and you dont want to come home and find your stuff on the floor...

[@djflakoelmonstruo9908]

Im building this one thanks

[@Djpuzzle]

Dope let me now how it goes. I'm still rockin this one.

[@Groovial]

Looks awesome but the height is uncomfortable. Would be better to add some legs under the Kallax or to make one more intermediate shelf under the TTs about 12cm. Your hands-elbows on the TT to be approx 90degrees. Now depends on each user height. I put for mine one more Lack under the TTs and I can store under it my accesories, headphones, needles etc...and it brings the height right where I want without making me humpy.

[@Djpuzzle]

Alexandru Calin yep! This height is perfect for me though. I some times have my decks in the cases and stack gear. There are some things you can do like add feet sure no problem I'm not going to though like I said it's the perfect height for my needs.

[@Ninja_Gaijin]

I think you should consider reinforcing the back with either solid sheets across the expedit/kallax holes, and/or struts and/or braces www.audioasylum.com/cgi/vt.mpl?f=vinyl&m=1018246 Try shoving the expedit side ways - even with glue and a bunch of records weighing it, it should shift a bit. I am currently researching ways to best reinforce the Expedit. Seems like t and l braces screwed into the shelving parts along with some pieces of wood slats Personally I just clamped a Besta on top of an Expedit - probably not the best as the clamps will surely warp/buckle the wood a little. But it got the job done 'sticking' them together for $30-40 of clamps. The Besta is big enough to fit three decks in regular position, just barey. I use some extra boards as plinths and in case want to use battle position ever. Still need some CDJ stands to whack on top though.

[@valentincotiga2331]

Hi, how tall is the whole thing? Like where do your hand land ? I think this is a really good idea and i wanna build one for myself, thing is i'm tall, 6'3, and i was thinking to get the shelving unit with 3 shelves but i'm not sure if that would be too tall. I would appreciate a reply on this, and thanks for the video !

[@Djpuzzle]

Hi, I'm 6'1. The top of my turntables (platter) when they're in the cases comes up to my waste and without cases up to my pockets. I can put the tops of my cases underneath to get more height which works great. I didn't want it too high because I like to stack gear on it, sometimes for example I'll cover the turntables and I'll put my Maschine MK2 on top. I pinned a comment about adding legs to get some more height out of it.Hope that helps.

[@valentincotiga2331]

Dj Puzzle thanks for your reply !

[@macboogieland2897]

im way more interested in knowing what you did with for your synth still, great video

[@Djpuzzle]

All the music in this video is mine. Follow my synth work on my Soundcloud soundcloud.com/djpuzzle

[@justinthymes5680]

Cool!

[@JDuenas]

Great video! Do you feel the speaker stands are very sturdy? I have a pair of Behringer Truth's which according to the specs weigh about 30lb each. Think the little arms will hold it okay?

[@Djpuzzle]

Javier Duenas they are sturdy but I wouldn't go more than 15lbs for each on the little shelves. These are Yamaha HS5 monitors. They weigh about 12lbs each.

[@ashleystyles6888]

VERY VERY nice

[@Djpuzzle]

Thank you!

[@명호티비]

may i ask you some? what size that bolt you changed to the others? m12? m10?

[@Djpuzzle]

3/8" diameter , 16 TPI, 2.5" long. So that would be M10 correct?

[@DazBray87]

Do you remember what size drill bit you used for the capita angled legs. Just purchased but no instructions

[@manicbassa]

This looks amazing. Did you use two Kallax? I guess you did as you needed a shelf for the laptop? Did you have to bolt both Kallax together or just have them next to each other? Thanks

[@Djpuzzle]

+manicbassa Thanks. I didn't strap them together. They sit next to each other nicely on a level floor with a rug. Two is great because it gives me more storage space for the records.

[@manicbassa]

+djpuzzle Thanks for the quick reply mate :-) and for the video!

[@Djpuzzle]

Dunno. I'm still using this in my studio with no problems.

[@natemanahan1132]

Is there an alternative part of the slanted capita? I went to ikea and they only have the straight capita leg

[@Djpuzzle]

You can get the slanted ones on Amazon here amzn.to/2Hqm1Xf

[@natemanahan1132]

@@Djpuzzle thank you bud!

[@Djpuzzle]

​@@natemanahan1132 happy to help.

[@natemanahan1132]

@@Djpuzzle thanks again!

[@KJShepp08]

Hi just watched your video very insightful I was wondering I just got a Pioneer DJ DDJ-SB3 and need something to place it on would this set up work with just 1 Kallax shelf

[@gabrielncali8999]

This is a good video! Thank you!

[@Djpuzzle]

Thanks! Let me know if you have any questions.

[@TheFunkloft]

Did you do anything to cover up the back of the LACK book shelf?

[@Djpuzzle]

No I just always have it facing the wall.

[@sienimorso8485]

Very nice! just ordered the parts! You saved my life its so cheap! Btw, whats the synth in the end which has the knobs with blue lighting around them?

[@Djpuzzle]

Sieni Morso Cool! It's a Moog Voyager electric blue.

[@mikecrane6287]

What size drill bit did you use for the holes you made for the first set of angled capita legs in PART 2?

[@DeeDee-kl4fr]

Can you add another book case shelving so there are three rows? As this seems a little low and I'm 6'3 and wouldn't want to waste space by adding legs!

[@valentincotiga2331]

Same ! did you find the answer to your question ?

[@DeeDee-kl4fr]

@@valentincotiga2331 Nope

[@valentincotiga2331]

Dee Dee i did some measurements and tbh it seems like the one with thrree rows would be a bit too tall...i’d rather have the 2 rows one and the legs hightened to the maximum, then if you add the height of the decks too, it’s pretty much alright i’d say. And then you’d have a bit of room for your feet to go under the table, which is good for your back since you have some wiggle room and not have to bend a bit ..

[@DeeDee-kl4fr]

@@valentincotiga2331 ok.. the current desk I have is around 1.5m.. I will also do some measurements as im going Ikea today! Thanks for your reply Valintin

[@gitucha]

Firstly..... nice job. Quick question, whats the height of the kallak? seems pretty low, im 6'2"

[@Djpuzzle]

Thanks. The height is 30" with turntable top of platter is 34". I often keep my in cases which adds a couple more inches of height. If you like to sometimes set gear up on top of your turntables like I do (midi controllers, iPad, etc) this is the perfect height for someone who is 6'1" You can add feet if you want yours to be taller.

[@maxinsley714]

Nice build! I have some pretty hefty speakers at 23 lbs each. Do you think the set up you have would hold them well?

[@Djpuzzle]

Thanks! That would be too heavy for this what I did in the video but I'm sure there is way to build it for heavier speakers. The problem would be with the smaller shelves. I suggest looking for some that are thick solid wood. The IKEA ones here are hallow. Very thin build. Perfect for small speakers. Still holding up quite well. Mine are 11lbs each (Yamaha HS5).

[@llewellyn56]

cool

[@Djpuzzle]

Thanks

[@pasqualepapa5689]

Bravo!!!

[@lol69_52]

Hey man, what was that song you were playing? With the record, the lyrics were like “for the love of House” I’ve heard it before and I’ve been looking for it. Thanks.

[@commitdubs]

Cool video! Any ideas on how I could get the main base (Kallax) a bit higher? I imagine I'd have to hunch over to mix, which may be bad for the back?

[@Djpuzzle]

Commit honestly I'm 6'1" and I'm not hunched over. With the equipment it is 35" which is DMC height and good for scratching but you can always add risers and or feet to it. There are short legs you could use and another shelf for the top. I've seen other peeps do this. I wanted it lower because I sometimes leave my gear in the cases which adds also adds a bit of height. Def a matter of preference.

[@thm_dj]

Commit there are wheels from ikea exactly for callax what u can mount on bottom

[@commitdubs]

djpuzzle Thanks mate, I ended up using 4 capita brackets to suspend a tabletop on top of a kallax shelf, which gave me my desired height. I may also add wheels which will give a tad extra height and also portability :D

[@commitdubs]

Commit BTW I'd love to see your take on a production workstation :) . Do another vid! :D

[@PaulNewhouse-Redbox-Records]

shared

[@bjerke95]

Awsome video, what length is it on the capita feet? :-)

[@limelightentertainmentderb4584]

This looks amazing I'm so gonna make one of these how much did this cost to make?

[@Djpuzzle]

Cool thanks. It was just under $300. Shipping was $99 :(

[@limelightentertainmentderb4584]

+djpuzzle thanx :)

[@robvilla_YT]

It’s not too low? Getting the parts for this build but thinking I want to make it higher

[@Djpuzzle]

A few people said that but it's a good height for me. I'm 6'2" With the turntable it's 34" but I like to stack gear on it like for example sometimes I'll put my Maschine on top of the deck with cover and sometimes I'll have my decks and mixer in cases on there too. You can always get these legs for it amzn.to/2WTJVi0

[@FreedomOfPress2010]

How sturdy would them speaker stands be for my powered krk monitors do you think?? Thanks

[@Djpuzzle]

Which KRKs do you have? They're still holding up great with my Yamaha HS50 but I wouldn't exceed that size or weight. Should be fine with the small KRKs. I'm still using mine and it's holding together just fine. Even moved them to a new space once!

[@Nonadanunca666]

Hi! I'm wondering if my 2 technics, in the position you had them at the end of the video not in battle position, and a 4 channel mixer will fit in just 1 Kallax (leaving space enough to put the Capita legs for the shelf). Thanks for the video! :)

[@Djpuzzle]

Yes for sure. That is a four channel Vestex in the video.

[@Nonadanunca666]

Right, but you have two Kallax together, I meant with just one Kallax alone and maybe the capita legs facing outwards so I can have easy access to the mixer and turntables.

[@Djpuzzle]

Oh I see sorry I read your comment quickly. Yes but there will be just enough room to attach the capita arms to the far upper right and far upper left corners. About 10 square cm on each side.

[@Nonadanunca666]

Thanks for the response! I will think on it as it seems a bit tight :)

[@JEFFSNICKELL]

was this with 2 Kallax 8 opening shelves? if so how are they connected? or do they just sit side by side?

[@Djpuzzle]

Exactly. Two of those. You can connect them with some brackets but I did not. They're sitting nicely side by side. The weight from my records is keeping them close and steady.

[@brendandevine515]

I'm wondering how attached the two kallax book shelves together?

[@Djpuzzle]

Hi there, I recommend using these brackets as I've seen this recommended by Ikea and some other sites. I decided not to connect mine this way because the floor was flat enough. They sit nice and tight without them. But if you use these you can easily connect them amzn.to/3beChqT

[@reddenstudio]

Nice work. Who makes your a-frame keyboard stand?

[@Djpuzzle]

reddenstudio Thanks. Ultimate Support Systems. They are discontinued. I found this one on Craigs.

[@Qwertz135]

Nice. What speakers are those? Yamaha HS series?

[@Djpuzzle]

Thanks they are HS50M

[@brentsvensson7882]

how well did the top shelf hold up with the weight of the speakers after time?

[@Djpuzzle]

It's holding up great! No problems so far. I have my decks set up battle style with a Kontrol S8 mixer in the middle.

[@brentsvensson7882]

Nice! I'm going to have my Pioneer 800 (4 Channel Mixer), Technics (battle style), 2 Cdj 850's. All on main shelf. Also mount my Rocit 8's on each side just as you have your monitors. Thats A LOT of weight and i was really concerned with the long term quality of it all. Thanks for the response man!

[@Djpuzzle]

Nice! No problem. Oops my pic didn't load. I'll reup it and send to you. The base of it is super strong. I now have roughly 800 records in it and the gear on the top. The shelf has a Furman power conditioner and a touchscreen Toshiba on it and then the Yamaha HS5 speakers on the little shelves. One thing you might want to consider for extra support is another set of the plastic disks/washer (or metal if you can find them) for both sides of the speaker shelves. I have them just underneath but one on top would protect it from being scratched and would reinforce it as well. That's the one thing I'm thinking about changing. It doesn't need it right now don't get me wrong I published this video 3 years ago and it's still going strong but I do think about that part from time to time and wonder how it's doing lol. I'm referring to this bit here kzbin.info/www/bejne/bqPZYZ1jbptmq9E

[@aspectinc]

Brent Svensson how is it holding up for you ? I was considering doing the same with very similar gear. Did you change anything or build it the same ?

[@D85M]

Exellent!!!

[@adamvuong]

According to the product description, placing the KALLAX on its side would only make it about 31" tall. Am I looking at the wrong product? It looked like it was at a decent height for you! Being 6'4 I'd need something decently tall

[@Djpuzzle]

Adam Vuong The surface of the gear on the desk is between 33.5 and 35" I'm 6'1" and the height is perfect for me. I often leave my gear in cases too which adds more height. There are options to add more height if you like. You could put feet or casters on it which I decided not to do.

[@capojeff]

It say's the width is only 30", so that doesn't seem like it would be very tall? Does the height work or are you hunching over?

[@tjnme5667]

Your confusing Width and Height... Width is how "wide" is its... Height is how tall it is. 30 inches (not even 3 foot)would be a no go I would think.

[@Djpuzzle]

Thanks. The height is 30" with turntable top of platter is 34". I often keep my in cases which adds a couple more inches of height. If you like to sometimes set gear up on top of your turntables like I do (midi controllers, iPad, etc) this is the perfect height for someone who is 6'1" You can add feet if you want yours to be taller.

[@leighinibiza]

The Kallax still seems a little low, I’m sure you can get feet like the Capita but a little smaller to put on the bottom of the Kallax and lift it a little

[@Djpuzzle]

yes for some please see pinned comment

[@allblackpromo2395]

What were the exact measurements for each step?

[@DjExelent]

Do the turndables fit the other way? Battle style ?

[@Djpuzzle]

Dj X-lent they do! I’ve had them both ways.

[@Il-matic]

Why we needed two additional bolts ?

[@caseyjakemorris]

How did you connect the 2 Kallax bookcases? Are they attached or still free standing?

[@Djpuzzle]

Casey Morris In this case I did not connect them but you could try using something like a "Strap Tie".

[@caseyjakemorris]

Thanks, I look forward to trying this.

[@carlosacevedo7184]

Can I modify the openings for the kallax? I'm thinking of getting rid of two of the boxes? I have wood working tools. thanks

[@Djpuzzle]

I wouldn't mess with that, they are made from cheap pressed particle board type material.

[@vapon]

KALLAX height is 77cm! how did you manage to increase it?

[@vinceelder7011]

I'm SO pissed because I'm trying to do this, but IKEA discontinued the damn angled Capitas

[@Djpuzzle]

They are available here on Amazon amzn.to/2Hqm1Xf

[@tlkennedy9751]

What size are those bolts you used on the Capita... I am out and left them at home...

[@Djpuzzle]

3/8" diameter , 16 TPI, 2.5" long. So that would be M10 correct?

[@JocelynSilverDJ]

.How it hold up under the weight over time? Anybody else do this with the Kallax? I just want to make sure my decks and records will be safe if I dont overload it.

[@Djpuzzle]

+Jocelyn Silver / No1AtAll I can honestly say that it is just as sturdy today as it was when I made this video. It's holding up nicely.

[@igooby7253]

Song playing in the en on the vinyl?

[@Djpuzzle]

iGooby Karizma - 4 The Love

[@ProOnlineGamer]

djpuzzle what about the one at about 4:30 in

[@Djpuzzle]

That one is mine. It's called Byteful.

[@JOETERRANY]

How long is the wall shelf?

[@Djpuzzle]

43.5" or 1.10m

[@JOETERRANY]

What size hardware store bolts??

[@Djpuzzle]

3/8" diameter , 16 TPI, 2.5" long. So that would be M10 correct?

[@cal6762]

How do you drill a hole big enough to fit the capita through? Sorry not very good with DIY

[@Djpuzzle]

I started with a small drill bit and just moved it in a circular motion to make the whole larger. There is probably a better way but this worked for me.

[@nelsonleeroy]

Thanks for your video but your desk is too low as kallax is about 77 cm, The right confortable height for a DJ booth is 90 cm to 95 cm... There's differents Ikea solution to fix this, like adding a kitchen countertop standing on 15 cm support legs.. This countertop solution can also create a deeper and larger work space, for bigger configurations...

[@Djpuzzle]

Nelson Leeroy I know thanks. It's a matter of preference. I like to scratch and use controllers so this is the perfect height for me. As you said there are options to raise it if you like but I like it low. I sometimes leave my gear in the cases which also adds more height to it. I'm not hunched over or uncomfortable and I'm 6'1"

[@nunesgil-3668]

What do you have today as your dj booth???

[@Djpuzzle]

Same thing! Check out my Instagram.

[@knobody_u_kno]

11:15 track id?

[@ZurtonDj1]

no longer sell CAPITA legs :( :(

[@Djpuzzle]

ZurtonDj1 try Amazon

[@Charliej]

ZurtonDj1 www.ikea.com/us/en/catalog/products/40051196/

[@ZurtonDj1]

in Spain not sell :( :(