HOW TO BUILD A SIMPLE STEEL FRAME WITHOUT WELDING | MR. LEE TV

KYK TOOLS
For more information you can contact visit their websites and you can also contact them on the numbers below:
Website: kyk.com.ph/
Instagram: kyk_tools?...
Tiktok: vt.tiktok.com/ZSJPumab3/
Lazada: www.lazada.com.ph/shop/aicint...
Shopee: shopee.ph/avadoninternational
AVADON INTERNATIONAL CORPORATION
Contact: 8241-8410 ; 8242-2037 ; 7960-6927
09238724405 • 09054762175 • 09054762152 • 09336040193
#KYK #KYKTools #builttolast #powertools #hardware #tools #QualityBuilt #protools #quality
Gumawa ako ng project na may kinalaman sa bakal, pero hindi ako gumamit ng welding machine sa pagkabit ng mga bakal.
steel frame no welding machine

[@wallytrinc9885]

it takes a lot of skill to use a angle grinder how you demonstrated , steady hand/good eyes,,,, I would also grind the sharp edges where you pop rivet ,,,, a little,,, nice job ✅

[@MrLeeTV]

Thanks Sir Wally, I appreciate it..

[@oscarperdigon8084]

😊

[@mybuddy3119]

Working without welding i like. 👍 But there's alot of work to compensate for it though. Thanks for the tip.

[@amnanbazli]

U buat keja memang cantik dan kemas. Well done

[@Ballbusteress]

Excellent inspiration, Mister Lee. And you have a great taste in music!

[@almajacinto1285]

Nagka idea tuloy ako master but hindi lamesa kundi canopy project ko nice one keep it up nakakatulong ito sa mga newbie na tulad ko

[@gelosoriano]

Level up! Galing!

[@halinahahmed4602]

Brilliant idea!...👍👍👍🙂

[@einnorstv1736]

Nice job and idea and no need to use welding machine

[@kumpuni]

Gusto ko subukan ang ganitong no welding system labo ng mata eh. Pde rin pala sa mga steel akala ko sa aluminum lang. Thanks for sharing.

[@kat_mgee]

very nice, good thing it didn't need a welding machine now, another project to be tried soon🔜 kudos laoban👍🏻👍🏻👍🏻 goodjob 👍🏻👍🏻👍🏻👍🏻👏👏👏👏

[@MrLeeTV]

Xie xie laopan..

[@rajendrajagtap9823]

Nice information .

[@alexgomez6763]

Super, es exactamente lo que estaba buscando para implementar en un proyecto que tengo. Gracias!!

[@parminotwahlang746]

Good job bro...nice,clean,perfect...accurate cuts too 👍👍👍

[@MrLeeTV]

Thank you Sir!

[@gilroy3323]

Nice idea. But please always use some eye protection particularly while drilling, grinding, riveting, and cutting. I observed that in some part of the video, you’re looking so closely on the part that you are drilling but no eye protection. Stay safe always so that you can continue sharing useful videos like this.

[@MrLeeTV]

Thank you for your comment and observations sir.

[@rafaelmolina123]

Totoo yan. Yung kinakapatid ko si kuya Renan nag discoloration na yung isang mata nya kasi natalsikan

[@robreynolds721]

Oh 😭 Volunteer for the Department of Safety eh?

[@rickytv24]

New subscriber here. THE BEST TUTORIAL! ✔️👍

[@jpogsagcaoili3023]

Salamat idol! Tamang tama gagayahin ko yan sa pagpalit ng lamesa nmin medyo my tama ng bukbuk🙏

[@MrLeeTV]

Kayang kayang mo yan sir. Salamat po sa panonood. Ingat.

[@delsantos542]

nice demo Bro. more pa bro.

[@archcast5550]

inspiring DIY! motivates me to complete my tools!

[@MrLeeTV]

Thank you sir, collect more tools, specially the one that you need the most.

[@padmakarlobhi9188]

Super idea 💡❤

[@nageshkondepudi4698]

Mr Lee excellent work Iam impressed a lot on seeing this video lots of applaud and appreciation for your skill, Iam a novice in metal fabrication work I want to experiment with this project, will you please list the names of the tools and purchase links for helping me to purchase them .

[@samuelsilas7210]

Nice work

[@Marissa880Livegood]

Love the idea ❤❤❤😊😊😊

[@jamalodingmacalimpao3120]

Ang galing naman. Salamat sa ideas Boss.

[@MrLeeTV]

Salamat sir at nakatulong po sa inyo ang video na ito.

[@dolan818]

Galing din!

[@priyanthast9496]

Thanks, good job

[@ricardomontajes4013]

Very good 👍👍👍

[@denver0602]

Iba ka talaga Mr. Lee apakagaling!🔥👏

[@MrLeeTV]

Salamat Bro..

[@DonDIYProject]

Nice, galing! Gagayahin ko yan pag may ganyan din akong project👍

[@MrLeeTV]

Salamat sir Don.. ok din sya sir..matibay din po..

[@boyskilledtv9469]

nice idea...iwas sa bayarin ng kuryente without using welding machine.

[@buenaventuradevenecia]

very simple job

[@daddyJOtv]

Ayos! Ayos! Nice one again lakay.

[@MrLeeTV]

Salamat Lakay..

[@jessiejamesmantua9224]

Best work and nice video👍

[@MrLeeTV]

Thanks..

[@dannybobis8233]

Ang galing ng idea…thanks

[@MrLeeTV]

Salamat po sir..

[@sribalajitourist4215]

Thanks a lot brother

[@kamilalalawi1842]

Great work 100/100

[@MrLeeTV]

Thanks!!

[@SridharK-nw4dd]

Best ideas

[@Estoy63]

Thank You Mr.Lee,sa bagong dagdag kaalaman

[@MrLeeTV]

salamat din po sir.

[@JoSimpleWorks]

Nice and good job bro!💪😍👍

[@MrLeeTV]

Salamat Bro..

[@mariaasuncionriola1157]

Super neat and detail un cutting

[@mariaasuncionriola1157]

Ang galing

[@MrLeeTV]

Salamat po Maam.

[@rickfer9549]

Ok yan bro galing ng work mo

[@MrLeeTV]

Salamat sir..

[@firebenderninja]

Yun naman pala pwde! Bangis🔥

[@MrLeeTV]

Salamat paps💪💪💪🔥🔥🔥

[@donutgamer2383]

Thanks dag2 knowledge 4 me😊as beginners

[@MrLeeTV]

salamat din po sir.

[@hilariosousa4728]

Bom trabalho, és um bom artista,sigo de PORTUGAL.

[@cocoylawsy]

nice work with the grinder sir, i like to do that as well sadly i don't have steady hands and good eyesight like yours. I recommend your wear gloves and hard face shield though just for safety

[@MrLeeTV]

Yung faceshield ok po yun..basta malinaw at malinis po yung shield, sa gloves,para sa akin lang po ah,prang mas komportable po akong hawakan ang grinder kapag kapag wala akong gloves, kc nararamdaman ko ito..natatantya ko ang andar nya.. Salamat po..

[@bobbypotter12]

Nice Lods, husay! 👍

[@MrLeeTV]

Salamat Lods..

[@joeldelatorre.]

Ayus👍

[@vilelaleopoldo8377]

Gud idea salute u sir

[@MrLeeTV]

Salamat po sir..

[@LosInmortalesGallos]

Nice job 👍🏻. Can this be done with link chain fence round metal tubes? I want to make a metal frame with round tube and I don’t want to solder/welder them.

[@jaysonferrer7697]

Ang galing idol

[@MrLeeTV]

salamat po sir..

[@adanegebre3593]

NICE

[@ebebztv9035]

Galing

[@bos13k95]

Ang lupet lakay.. 💪😎

[@MrLeeTV]

Yun oh..Bos13k Salamat Lakay💪

[@gwardiyaimbentortv]

Galing mo idol❤

[@MrLeeTV]

Salamat po.

[@jhunebarttv9145]

Wow nice video Amazing. new subscriber🤘

[@MrLeeTV]

Thank you sir..welcome po sa munting channel ko..

[@oftechmedia4718]

Parey supper idia am from kerala india

[@tedsTVlog]

Ang lupet mo idol parang madali lng sau ginagawa mo

[@MrLeeTV]

Salamat po Sir. Sakto lang po. Practice lang sir😁

[@binod2065]

gracias PO

[@thetribal697]

Nice Work brother .......you sounds Phillipines.......my neighbour.......I AM FROM MEGHALAYA

[@MrLeeTV]

Hi Sir, welcome to my channel, Yes sir, I'm from the Philippines, Thank you for the comment. Take care..

[@fareastson2420]

New subs! Bro! Thanks sa share!

[@MrLeeTV]

Thank you Sir.

[@christianreyes6244]

Good job

[@MrLeeTV]

Thank you!!

[@mkfmkf3625]

Thank you so much

[@MrLeeTV]

Thank you!

[@eldredignacio6643]

Sana po, meron sukat bawat isa sa mga cuttings na ginagawa mo. para magkaroon ng idea yung mga bagong gagawa ng ganyan, tulad ko, salamat.

[@filipinotechnician9854]

Good God 🙏🙏🙏 Bless...

[@geraldabierta1303]

verysimpull wrk

[@galoiola]

Awesome.e

[@MrLeeTV]

Thank you! Cheers!

[@rbtech7520]

Napadaan lang Master.😄

[@MrLeeTV]

Welcome po sa aking munting channel Master..Salamat..

[@jeffa847]

What kind of rivets are those at 7:10? How strong are they?

[@manueldoctor1738]

Good job...ano po tawag sa ruler na gamit mo at san yan nabibili? Salamat po sa pag reply..

[@dolan818]

New subs po

[@MrLeeTV]

Hi Sir Dolan, Welcome po sa aking Channel.. Enjoy po. Salamat.

[@DomingoRicahuerta-gu5qb]

wwwooowwwwww

[@Zeuslifestyle]

Pwed kaya toh sa car garage parking na pang bubong or trusses ng bubong ?

[@ShaileshPatel-dw7ug]

❤

[@pinoymoviesfanatics]

Idol pwede kaya ganyang diskarte sa bed frame

[@myteachermary7714]

Gusto ko sana bumili ng grinder pang kinis ng plywood. Or wood. Taz drill kaya lang mahina ang pulso ko. Haist. Ang galing mo Bro.

[@MrLeeTV]

Naku po, medyo delikado po ang grinder Maam. Ingat po kayo.. Salamat po Maam.

[@RealSoloShow]

Pwede bang gawin yan sa angle bar? At alam mo kaya kung pano pwede ikabit ang metal matting sa agle bar nang hindi winiweld?

[@jamesortega8681]

\gawa ka tubular gate sir na walang welding

[@onatlopez9075]

Sana ipinakita rin halimbawa hinde na kumagat ang ngipin ng riveter nilalagyan lang ng gas o thinner para tumalab o kumagat yung ngipin ng riveter sa rivet. Ty

[@VinsmokeSanji13]

Kaya ba nya supportahan ang 15 gallons na aquarium sir? Salamat.

[@thetribal697]

Don't underestimate the power of rivets

[@MrLeeTV]

Yeah!!!

[@noelbritanico3418]

Sir sa ibabaw po mkikita po b yung pinagkatingan

[@glenebrigole5688]

Hi sir. Applicable bato sa food cart?

[@Kmangyans_TV]

SHOUT OUT iDOL

[@nikkojoson]

nasa magkano yung ganyang bakal sir? wala kasi sumasagot na hardware sa fb. nice content lods

[@WillieMercado-xe1ku]

pero kung lamesa o bangko pwede pero sa trusses mahina rivet

[@dangaynhsblitzkrieg4799]

Mahusay! Pwede b screw gamitin s halip n rivets? At what size ang posibleng magamit? Slmat aydol!

[@MrLeeTV]

Tama idol,pwede rin ang screw,yung mga self drilling screw,pero dapat hindi tatagos sa tubular, salamat idol..

[@edwardbeatima]

Mr lee pano gumawa ng bed na gawa sa metal stud thank you

[@MrLeeTV]

Ay sorry po, hindi po kami nagawa non sir. Salamat po

[@arielgarcia3711]

Ayos aydul.ano thickness nun bakal n gamit mo?

[@MrLeeTV]

1x1 na Tubular bro, 2mm ang thickness..salamat.

[@arielgarcia3711]

@@MrLeeTV salamat aydul..

[@mosestalidong2846]

Thats cool but safety first

[@MrLeeTV]

Thank you.

[@kiizionogorie4930]

Puede bs gumawa ng water rack dyn sa metal furring kaya kaya nya bigat?

[@MrLeeTV]

Parang malambot ata kapag metal furring sir, mabigat po ilalagay nyo, try nyo po square tubular mas ok po. Salamat.

[@felixestrebillo9461]

Boss, Mr. Lee kmosta.

[@jorgevazquez4371]

Do you think it is resistant to make a luggage rack for the car?

[@MrLeeTV]

Hi Sir, if you choose to do this for your projects, make sure that the finished product will be stable, because the rivets will loosen every time you move the project. Thank you.

[@Sam-xt9pg]

Sir pwede po bang malaman ang sukat steel frame at size ng revit, at size ng tip ng grill. balak ko po mag DIY ng dog cage for my furbabies. salamat po sana mapansin.

[@MrLeeTV]

Hi Sir, Ito po mga sukat, 1inch X 1 inch square tubular 5/32x3/4 rivets, drill bit 5/32 din po. Good luck po sa build sir, enjoy. Salamat po.

[@user-wb8iq7fz3s]

❤❤❤❤❤👍👍👍👍👍👍👍👍👍👍👍👍

[@IrfanMahmood64]

I guess nuts and bolts are better option than rivets... ?

[@robertoadrianfrancisco4148]

Sir pag nagkamli ng kabit ng blind rivet ano po pwede gamitin pantangal ng mga ganyan sir?

[@MrLeeTV]

ito ay base lamang po sa aking karanasan at madalas ko naman po ito ginagawa at napaka effective po para sa akin, Kaya po ng angle grinder sir na may grinding disc, kung nakabaon naman po at gustong tanggalin, pwede po barenahin yung mismong rivet sir.. Salamat po.

[@harryfelix5253]

CAn anyone tell me what type of the bolting use. I mean the technique

[@kamotipstv6980]

Hi sir with that setup po can it hold tools po?

[@MrLeeTV]

Hi Sir, Kaya po sir..basta naka fix po,at hindi nagagalaw o nililipat-lipat. Salamat po.

[@Johnny5932u]

What is the name of the punch screw? And is it sealed permanently?

[@raspberrytreacle]

It's a rivet

[@romeodelosreyes7787]

sir ano po ang brand ng f clamp nyo na kulay blue?

[@MrLeeTV]

Vulcan boss..sa wilcon marami nyan..

[@gilbertmendoza1528]

Boss ano po gauge n steel gamit nyo? G.i. po b gamit nyo ? God bless po

[@MrLeeTV]

1X1 na tubular steel sir, 3mm po kapal ng bakal.. Salamat po.