How To Build A Simple Tooled Leather Knife Sheath | You Can Make This Sheath

In today’s video I will be creating a tooled leather knife sheath. The leather that I am using is from Montana Leather. It is the Vaqueta line of dyed Vegtan leather. One of the great things about this leather is that you do not need to dye it. Yet, it works like a traditional vegtan leather. This saves time, mess, and money. Here is a link to the leather and other items used in today’s video.
The leather
www.montanaleather.com/produc...
The clear finish
www.montanaleather.com/produc...
I found that the dyed leather cases nicely and tools well. The color is crisp, clear and I think it turned out great. I will show you how to create the tooling pattern and each step of the process. If you did not want to tool leather then you could use the same design to create an easy gift.
Thanks for watching my videos today.
Please Like, Share, Comment, and Subscribe!
‪@InMyBusyLittleShop‬
‪@montanaleathercompany‬
​⁠
​⁠
#leatherproject #leathercraft #leather #howto #barryking #fiebing #leathertooling #tooledleather #toolingleather #toolingsdesign

[@waynebast4009]

Robert, Thank you for those kind words. Way back when I had my Tandy Leather store ( 1980s ) I learned a lot. It is awesome to see someone like you doing something you enjoy doing and passing it along to others through this You Tube platform. It was and is a pleasure to have meet you and your lovely wife. Keep up the great work and hope to see you again soon.

[@InMyBusyLittleShop]

Thanks again Wayne. I look forward to getting together again.

[@edcunningham899]

Like the ballpin hammer idea

[@InMyBusyLittleShop]

I’m glad that you liked the tip.

[@JohnLittle-ie4ok]

Amazing talent of you “ Winging “ it to hand draw all these patterns.

[@InMyBusyLittleShop]

Thanks John. I do think it came out nice

[@williammrdeza9445]

That sheath came out wonderful, Robert! The workmanship really shows and the design, finishes, and tooling complement the knife well.

[@InMyBusyLittleShop]

Thanks! I do like the way it came out! Yet, it’s nice to hear your remarks. Thanks for watching

[@JohnLittle-ie4ok]

Very nice work from Wayne!! Also very kind of him to be so gracious and generous to you and your hobby

[@InMyBusyLittleShop]

I agree. I like Wayne’s work and encouragement

[@JohnLittle-ie4ok]

That’s an awesome knife sheath you made. I was able to see and hold this sheath in my hands after completion and it turned out amazing !

[@InMyBusyLittleShop]

I have to agree that it came out nice.

[@donnaroberts164]

Wayne's work is really awesome.

[@InMyBusyLittleShop]

I totally agree.

[@jackiemitchell4418]

I watched and treasured every minute of it. Thank you!

[@InMyBusyLittleShop]

Thanks for the words of encouragement

[@1littleSher]

Sitting down on the job? 😮 Nice of those leather crafters to share.

[@InMyBusyLittleShop]

LOl…. Rest the feet when you can.

[@OpenAirAdventure]

Nice job. Yes, the black with no rivets looks great with that knife.

[@InMyBusyLittleShop]

I’m glad that you agree. Sometimes I’m not sure.

[@donnaroberts164]

That is a gorgeous sheath!!

[@InMyBusyLittleShop]

I have to agree. I think it came out really nice.

[@homegrowncountryhomeplace]

Very nice leather knife sheath. Great work. Have a Blessed Day Friend! Justin

[@InMyBusyLittleShop]

Thanks Justin!

[@JohnLittle-ie4ok]

Great looking belt you are wearing in the video !

[@InMyBusyLittleShop]

Thanks!

[@johnnylgulledge6899]

Keep those videos coming, very informative! 👍

[@InMyBusyLittleShop]

Thanks! I appreciate you following along.

[@anchordownleather]

Great Looking sheath Robert! I enjoy your upbeat attitude and your humble craft work. Keep it up my friend! ~Jathan

[@InMyBusyLittleShop]

Thanks. I appreciate the kind words

[@kevincox6311]

Nice work Great job on the edges

[@InMyBusyLittleShop]

Thanks! Edges can be a challenge

[@fatefarmspa]

Good evening, sir. I seen you on Todds channel. I’ve heard about you from several other KZbin channels very impressive product you put together the craftsmanship is second to none 👍.

[@InMyBusyLittleShop]

Thanks! I appreciate having you along.

[@toddsoutsideagain]

Beautiful piece Robert! Seeing this sheath makes me want to start carrying a small fixed blade😂 Take care👊🏻

[@InMyBusyLittleShop]

Thanks Todd. I bet you would enjoy it.

[@mikeerickson7212]

Another great piece of work. Love your videos.

[@InMyBusyLittleShop]

Thanks! I appreciate you watching and commenting.

[@pamelalittlefield4608]

That sure is a beautiful...great job!

[@InMyBusyLittleShop]

Thanks! I appreciate that you take time to watch

[@pamelalittlefield4608]

Your welcome...I'm actually learning from you..😊😊

[@jonas-mb6cf]

Thats a very nice sheath robert 👍🏻so fun to watch, a knife sheaths video cant be to long 😉and now over to wayne , very nice i hope to se more 👌🏻i started leather crafting 3 years ago and i just love it, and knife sheaths is one of my favorite to make , best regards Jonas

[@InMyBusyLittleShop]

Thanks Jonas. I hope you are doing well. I was really impressed with Wayne’s work and experience

[@leemichel8199]

I personally round off my leather hammer so it does not mark the leather .Great content sir .God bless you and your family. Lee

[@InMyBusyLittleShop]

That is a great tip. Thanks for watching!

[@marchie886]

Dam nice i picked up a couple things thank you for sharing

[@InMyBusyLittleShop]

You bet. I’m glad you enjoyed following along.

[@milom.2057]

Wow! Beautiful beautiful work Robert.

[@InMyBusyLittleShop]

Thanks!

[@milom.2057]

@@InMyBusyLittleShophello Robert. Milo again with more questions. Thanks for your patience! Do you have a video on best gluing techniques? I’ve been trying to make some simple guitar straps. Nothing serious but keep running into issues when it comes to gluing. I am trying to glue a chrome liner to veg tan. Been using Barge, two coats. Waiting between coats but every time the glue is not sticking along the edges. I’ve weighed down the project, waited overnight just to find that the edges did not stick extremely frustrating! I’m thinking I may need to rough up the backside of the chrome? Is it too hot in my garage for the glue to setup? What am I doing wrong?? Thanks Robert in advance.

[@InMyBusyLittleShop]

@@milom.2057Milo, interesting I have not had that issue as you describe it. Early on I purchased some precut belt straps (veg) that I figured out later had been sealed on the back. The contact adhesive didn’t bond well with that. The one thing that I do find on Crome is it moves when brushing and is hard to get the adhesive all the way to the edge. I think you have watched me place the leather on cardboard with the edge of leather matched up. I then brush off the side, outward, this helped me get a good coat all the way to the edge. The other thing is some of the crome tan really soaks the adhesive in. I let the first coat dry at least 10 minutes regardless of how it feels. I hope this information helps in some way. Oh, I do tap the leather down and then I use a roller not the burnisher on crome because it wants to stretch more. .

[@milom.2057]

@@InMyBusyLittleShop thanks for the quick reply. Yes, I’ve watched your videos which shows you applying glue while having the edge positioned so you get a good coat. I’ve done the same thing as you and then later say out loud, “but Robert does it this way!” I think I found the problem/solution. I took two scraps,one chrome and the other veg tan. I roughed up the chrome with some sand paper, applied glue, waited, and then put them together. Turned out great! No gaps. Now it’s a cool day so I don’t know if that is also a factor. But thanks for your reply and help! Really appreciate it.

[@MillersStumpsandFirewood712]

Just caught you on Todd's Outside Again and subscribed, I will continue watching, you have a heck of a talent.

[@InMyBusyLittleShop]

Thanks. I appreciate having you along.

[@jenhartart2]

Beautiful design and finish and a ton of work! If I am unable to punch through a lot of leather layers, I mark the stitch line and use a fine drill bit on my Dremel, mounted on a mini drill press.

[@InMyBusyLittleShop]

I have not tried that. It sounds like a great idea. I will have to give it a try one day.

[@johncollins500]

Great work Robert. New subscriber from S. E. Ohio. Seen you on Todds Outdide Again. I think Leatherwood isn't as popular as it once was. Hope you have a Happy Father's Day

[@InMyBusyLittleShop]

I really appreciate you coming over and subscribing and checking out my channel. Leatherwork certainly is a niche. In some parts of the country it’s more popular. I think partly with the influx of leather products that look quality but are not. Let me know if there is a leather project that you would like to see.

[@johncollins500]

@InMyBusyLittleShop there may be a project for 4 H. It's a holder for the number of participants that show their livestock. I would probably have to send a pic of it. Anyway enjoyed the making of the sheath.

[@InMyBusyLittleShop]

@@johncollins500 sounds great. Maybe reach out to me through FB messenger or email of [e-mail]

[@larryjernigan5983]

Nice job from you and the other person. Can you do a lnlay sheath sheath

[@InMyBusyLittleShop]

I have not tried that technique on a sheath yet. I need to try that out. Thanks for the idea.

[@retiredhideleathercraft4239]

Well that new cutting board isn't a virgin anymore. Great looking sheath and enjoyed you sharing your process. How do you like your circular overhead light? Do you find it minimizes shadows during your build process? LED, I assume? Thanks again!

[@InMyBusyLittleShop]

My son purchased that for me. Found it online. It does help to get rid of shadows. It is LED and I think it works well. It is not an expensive model but I have fine it useful. Great question!