How to build a solid lightweight and high wooden car ramp, with shelves for tools

  Рет қаралды 137,434

ThinkTechnikk

ThinkTechnikk

Күн бұрын

Sometimes however you might need easier access to the under body with more room to maneuver. When you are changing oil, perform service or working on exhaust, skid plates or control arms etc. you could use ramps to drive on top of, to get more room under your vehicle. Using ramps is easier and quicker that jacking up the entire vehicle and setting up four jack stands.
There are several options available if you decide to purchase car ramps, many made of plastic, and some is expensive, some shipping is more expensive than the ramp self.
After considering all the pros and cons, I decided that I would rather make my own ramps and make them out of material that will definitely support the weight of my vehicle - wood, In addition, custom build them to fit my car and the height that I prefer and cost less money. In addition, I do not have place inside to store them when they are not being used, and impregnated wood can stay out many years with now problem.
Building your own set of DIY wooden car ramps is a very easy project. If you have all the materials and tools ready, it should take less than a couple hours to complete all tow ramps.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Please subscribe To My Channel and Get More Great Tips and tricks.
Make sure to Like, favorite and share this video and subscribe if you haven't do so already at:
/ @thinktechnikk
Share this video with a KZbinr friend:
• How To Replace Tesla M...
• How to build a solid l...
• How to Change Front Br...
Let's connect:
moghennavid@gmail.com
/ navid-mog
/ navid.moghen
Music:
www.youtube.co...

Пікірлер: 87
@magnuswreed5122
@magnuswreed5122 Жыл бұрын
I've made a pair of my own. They work better than expected. Serviced easily two of my cars this summer. Thumbs up for the idea.
@paulmunro3050
@paulmunro3050 3 жыл бұрын
Remember when wood was affordable? Nice ramps though 👍🙈🤣
@ricardonunez1311
@ricardonunez1311 3 ай бұрын
Exactamente la madera tienen un precio muy alto, prefiero subir y bajarlo y ponerlo en burro
@СтаниславКечин-м9и
@СтаниславКечин-м9и 2 ай бұрын
Хочешь отвезти девушку в дорогое место? Своди её на лесопилку))
@acrepairnearme
@acrepairnearme 2 жыл бұрын
So far it's the best wood design.!
@БорисВайткович
@БорисВайткович 2 жыл бұрын
Скаты надо делать съёмными удобней работать, а так все СУПЕР
@kenjithomas
@kenjithomas Жыл бұрын
Awesome ramp! And the best part was using the ramp as a coffee bench. 😊
@jameswhite1319
@jameswhite1319 2 жыл бұрын
Thanks for sharing
@martingaming1367
@martingaming1367 2 жыл бұрын
Excellent work thanks 👍👍👍👍👍
@blizteredthumbs7911
@blizteredthumbs7911 Жыл бұрын
Installed wheels. Carries them lol great job. Honestly? I'd install more uprights. Any gap could be a mishap. Even bidirectional. It simply means they can not collapse.
@theodoremassonburg4196
@theodoremassonburg4196 2 жыл бұрын
Thanks for sharing.
@DriveToyotaSienta
@DriveToyotaSienta 3 жыл бұрын
Thank you bro
@ThinkTechnikk
@ThinkTechnikk 3 жыл бұрын
Thank you so much Jim:) Glad you liked it.😀👌
@puppycasper4633
@puppycasper4633 2 жыл бұрын
Absolutely the best I ever seen. I build it and I am very satisfied 😌 😀👌👌👌👌👌👌👌
@nathanbrown4725
@nathanbrown4725 2 жыл бұрын
good stuff
@wync2203
@wync2203 Жыл бұрын
oh wow look at the room under that's awesome! great job
@2amSpeedMerchant
@2amSpeedMerchant 2 жыл бұрын
Just what I was looking for, well done.
@ozziejim8472
@ozziejim8472 3 жыл бұрын
Your ramp design allows for tools and parts shelves, very handy, I like it!👍
@ricardojano3716
@ricardojano3716 7 ай бұрын
Two fold Love the bench
@josefloreslopez9020
@josefloreslopez9020 6 күн бұрын
La idea es buena pero por seguridad deberías poner más blokes en el soporte
@mousasafayian6071
@mousasafayian6071 4 жыл бұрын
Good job thanks made one
@lexxa1953
@lexxa1953 3 жыл бұрын
Автор молодец. Самый удачный деревянный вариант из всех просмотренных. Расейские вообще какая-то муть. Сделал по указанным размерам, доски взял толщиной 25 мм и шириной 100 и 150 мм, общая ширина 250 мм, вполне достаточно, количество промежуточных опор из доски 50х100 мм увеличил вверху до 5-и, внизу до 6-и, и ещё две опоры под наклонной доской в промежутках. Размеры определены идеально, угол наклона доски позволяет заезжать и съезжать без касания о неё передним бампером даже Матизу 0.8. А у него очень маленькие колёса. Общая высота эстакады 270 мм, вполне себе приемлемо, под машиной можно свободно работать. Дёшево и сердито.
@КонстантинМазарчук-н4т
@КонстантинМазарчук-н4т Жыл бұрын
Ещё можно в гараже подвесить и использовать как полки)
@yuriy6855
@yuriy6855 Жыл бұрын
Скажите есть размеры данной эстакады.
@naeimrahmatpanah3401
@naeimrahmatpanah3401 4 жыл бұрын
This is awesome dye Thanks I build it and its work perefectly for my SUV👌👍👌
@22kpar1xcyberdyne9
@22kpar1xcyberdyne9 2 жыл бұрын
Nice video. But I will stack my boards since I will be using them long term and on semi trucks! I like your wheels and storing them as a bench.
@AdrianBears
@AdrianBears 4 жыл бұрын
You have some real good skills! pleasure seeing you in this!
@joaopaulogois6118
@joaopaulogois6118 2 жыл бұрын
Excelente ideia ...parabéns 👏👏👏
@zbigniewkaczmarek9918
@zbigniewkaczmarek9918 3 жыл бұрын
Jest super
@riversidetribute4459
@riversidetribute4459 4 жыл бұрын
A good invention !!! Like #11 👍👌
@ThinkTechnikk
@ThinkTechnikk 4 жыл бұрын
Thanhks
@ck3737
@ck3737 Жыл бұрын
good work… enjoy your cookie and coffee 👍🏻
@ThinkTechnikk
@ThinkTechnikk Жыл бұрын
Thanks body 😂😂👍
@sisirakumara3778
@sisirakumara3778 2 жыл бұрын
Good
@tomvana4270
@tomvana4270 Жыл бұрын
Looks like a house of cards. Hopefully there’s enough material there if it were to collapse to keep the vehicle from coming all the way down on you.
@chrish7336
@chrish7336 Жыл бұрын
I was thinking same thing. If nothing else at least some 2x4's down the middle to provide longitude support.
@infospot4119
@infospot4119 4 жыл бұрын
enjoyed watching (A+)
@safecarsforyou
@safecarsforyou 2 ай бұрын
Loved your work, may I know the entire length of the ramp total height of the ramp the length of the slope
@Алекс-ы6л2б
@Алекс-ы6л2б 2 жыл бұрын
Молодец !
@tomvana4270
@tomvana4270 Жыл бұрын
Might want to substitute 4x4s instead of the 2x4s less likely to rack on you.
@allegory7638
@allegory7638 10 ай бұрын
It shouldn't rack with the triangulation, IF he screwed the acute angle together at the ramp entrance, which I didn't see him do, but maybe I missed it.
@tomvana4270
@tomvana4270 10 ай бұрын
You must be an engineer. I’ll stick with what I originally said.@@allegory7638
@lagunafishing
@lagunafishing 2 жыл бұрын
Nothing at all wrong with those plus you get to use them as a bench well done! 👍 A slight improvement would be to use threaded bar instead of screws if you have some.
@blackjack9863
@blackjack9863 3 ай бұрын
Kann man die auch auf eine Höhe von 450mm bauen? Wäre angenehmer unterm Auto zu arbeiten. Und wie sieht es aus das man hinten auch noch mit hoch kommt?
@OlariuAlexandruB
@OlariuAlexandruB 2 жыл бұрын
M-ai inspirat și pe mine :D
@Makcum4uK
@Makcum4uK Жыл бұрын
В России за 70$ сделают из металла😅. А так не плохо, своими руками. Если бы ещё выложили схему с размерами, то было бы ещё лучше. И нужно обязательно покрасить или покрыть лаком.
@JMc.D
@JMc.D 8 ай бұрын
If you put two more castors on the end you could stand them upright and push them in a corner.
@alejandroolivares4032
@alejandroolivares4032 7 ай бұрын
Anyone help me out? I was thinking of extending this to fit the entire car but i feel like that's too heavy
@ThinkTechnikk
@ThinkTechnikk 4 жыл бұрын
ramp design allows for tools and parts shelves, very handy, 1:58 Mursement one: 230mm, 2:12 Mursement Tow: 480mm, 2:20 Mursement Three: 900mm, 4:24 You should drill 4 hole for 4 screw for each lumber, i did it later when i install the lumbers. And if your wood is impregnated maby you do not need drill holes at all. As i did not drill hole for the 2 other screws on the lumber. The bolt goes through without cracking the wood.
@casibasi1937
@casibasi1937 2 жыл бұрын
👍👍👍👍👍👍👍👍👍
@stueygewy
@stueygewy Жыл бұрын
Nice Tesla pants! 🙂
@Mk_Studio_Officiel
@Mk_Studio_Officiel Жыл бұрын
Quelle sont les dimensions des rampes ? Hauteur et longueur des rampe svp, quelle bois utiliser vous ?
@camofpv
@camofpv 11 ай бұрын
Now the only thing I’m missing is a driveway.
@petrusbenckey
@petrusbenckey 2 жыл бұрын
I would like to build a wooden ramp in the shape of a right-angled triangle with horizontal slats, it will be placed between the two iron ramps in the event that the car ends up in the empty space between them, which is 57 centimeters away.It's improbable the car could drive over the empty space, but when I get off I always fear that it could happen. I was wondering how I can tell if the wooden ramp will be suitable for cars.
@22kpar1xcyberdyne9
@22kpar1xcyberdyne9 2 жыл бұрын
Stack the wood in layers like paper and they will not fail.
@kjs2030
@kjs2030 11 ай бұрын
바로 이거야~~^^
@mguerramd
@mguerramd 7 ай бұрын
If he can build these ramps he needs to build a workbench! Get the heck up off the ground. Nice ramps, btw.
@DataLog
@DataLog 2 жыл бұрын
Will it work fine with front wheel drive? I'm afraid it could launch back if it slips. Btw, that's really expensive.
@ThinkTechnikk
@ThinkTechnikk 2 жыл бұрын
absolutely
@ducaschoenberg7156
@ducaschoenberg7156 4 жыл бұрын
This time I will do it manually with the help of Stodoys plans designs.
@puppycasper4633
@puppycasper4633 2 жыл бұрын
😀👌👌👌
@camofpv
@camofpv 11 ай бұрын
Add some skateboard grip tape on top.
@armandominelloneto9898
@armandominelloneto9898 Жыл бұрын
Perfeito.
@jeanvaljean1475
@jeanvaljean1475 Жыл бұрын
Hi. How much would the wood cost today if bought from home depot?
@ThinkTechnikk
@ThinkTechnikk Жыл бұрын
Different location different price ,
@jurajnovotny4725
@jurajnovotny4725 3 жыл бұрын
Hi, great video, what is the thickness and width of the wood u used ? :)
@ThinkTechnikk
@ThinkTechnikk 3 жыл бұрын
See picture 0:41 , here are all you need
@jurajnovotny4725
@jurajnovotny4725 3 жыл бұрын
@@ThinkTechnikk Oh thank you, I probably watched whole video and skipped that part :D
@cashstith4935
@cashstith4935 Жыл бұрын
Hi what degree of angle did you use?
@ThinkTechnikk
@ThinkTechnikk Жыл бұрын
14 degree. Better watch my other drawing video for more detail. At 0:29 here kzbin.info/www/bejne/oZ7ckJeFdqaSZ7M&ab_channel=ThinkTechnikk
@starshipgus8578
@starshipgus8578 Жыл бұрын
This is something I can build,my dilemma is,for $70 I can buy metal ramps and avoid the labor of building these heavy ramps.The prices of everything now days including lumber makes these practical projects,impractical.I had build my wooden ramps as a teenager to service my 68 GTO in 1968,I wish I had them now.
@JohnSmith-xu7ev
@JohnSmith-xu7ev 7 ай бұрын
These are taller and more stable
@mguerramd
@mguerramd 7 ай бұрын
I wouldn’t trust my life to $70.00 ramps. Not a chance.
@puppycasper4633
@puppycasper4633 4 жыл бұрын
Can passibly Paint the woods rampete u build?
@ThinkTechnikk
@ThinkTechnikk 4 жыл бұрын
Yes of course, the wood is paintable, but this wood is impregnated which means is waterproof and tolerate a lot of weight 👌 its up to you than
@ciprian3217
@ciprian3217 Жыл бұрын
Buna seara! Ce dimensiune ai folosit la burghiu? Mulțumesc!
@ThinkTechnikk
@ThinkTechnikk Жыл бұрын
Please see 0:43
@wasilihopp
@wasilihopp Күн бұрын
100%👍👍👍👍👍
@moochythecat3435
@moochythecat3435 Жыл бұрын
crappy music
@thorstenduessler6101
@thorstenduessler6101 5 ай бұрын
Just remember, not certified so if it fails and someone gets hurt, YOU go to jail
@rh7163
@rh7163 4 ай бұрын
Just remember, anyone can sign a waiver ........... Use at your own risk.......
@thorstenduessler6101
@thorstenduessler6101 4 ай бұрын
@@rh7163 waivers don’t stand up in court, you should know that. Manslaughter overrides a waiver every day of the week.
@МаксимГенадич-ф3д
@МаксимГенадич-ф3д 4 ай бұрын
786
@Andrewlone174
@Andrewlone174 6 ай бұрын
not for serious jobs
Great DIY idea for Cars! Homemade Car Ramps
6:14
Make It Easy Mechanic
Рет қаралды 307 М.
Wish I Built This Car Ramp Years Ago
7:41
Specific Love Creations
Рет қаралды 3,6 МЛН
SHAPALAQ 6 серия / 3 часть #aminkavitaminka #aminak #aminokka #расулшоу
00:59
Аминка Витаминка
Рет қаралды 932 М.
Will A Guitar Boat Hold My Weight?
00:20
MrBeast
Рет қаралды 216 МЛН
Brawl Stars Edit😈📕
00:15
Kan Andrey
Рет қаралды 50 МЛН
Is this too much - DIY Wooden Car Ramps with a few Essential Extras
14:36
Everyday Workshop
Рет қаралды 135 М.
HOW TO BUILD WOOD TRUCK RAMPS - For your Truck Jeep Bronco Car !!!
8:12
North Shore Overland
Рет қаралды 55 М.
Improving the Best Car Ramp EVER
5:03
Specific Love Creations
Рет қаралды 429 М.
Мини эстакада
3:01
Максим Кучкин
Рет қаралды 194 М.
How to Make Absolutely amazing car INVENTION
10:52
Invented Ideas
Рет қаралды 2,1 МЛН
Automotive Lift Ramps Made in USA - Kwick Lift
7:50
The Hands On Channel
Рет қаралды 125 М.
Why don't people use these for floating shelves?
18:13
Lincoln St. Woodworks
Рет қаралды 1,3 МЛН
Homemade car lift
9:07
Rujo lift
Рет қаралды 235 М.
Обледенение АВТОМОБИЛЯ 🥶 #Shorts
0:26
ФАКТОГРАФ
Рет қаралды 6 МЛН
Магазин на колесах
0:13
Брин про бизнес
Рет қаралды 4,4 МЛН
The dog just ****** my car 🤯
0:31
Andrey Grechka
Рет қаралды 1,8 МЛН