How To Build a Storage Room With Automatic Sorter in Minecraft

[@mischake]

Ah, the standard sorting system. And yet, this video contains a lot of useful tips that I didn't know about yet. Thank you guys so much!

[@callumari.95]

your'e def a discord mod lmao

[@triangle3370]

@@callumari.95 Fr💀

[@fresco363]

@@callumari.95 im pretty sure hes being satire

[@SG_MALIK_]

One of my favourite channels...... straight to the point with no begging for subcribers..... Respect

[@Bellingham3dits]

Yes

[@speev9550]

2:15 Quick tip: If you dont want to leave 41 items in the first slot , you can add 11 filter items in the other four slots for the same effect. It sould leave 1 item in the first slot. This only works on modules with no others right next to them.

[@Sam-vf5uc]

I was about to say the same thing, although I usually leave 41 filler items in slot 2 then one item in the last three slots. It has worked for me with modules right next to each other. Its especially nice when you don't want to waste 41 netherite ingots. You can also let all the miscellaneous items feed into a chest at the end of the storage system, meaning all the unstackable ones. Personally I don't use sorting anymore because its just too laggy. Instead I might have sorters on auto farms so they're unloaded when I'm not near the farm.

[@Ark-Confusion-One]

no and never, if the input speed is faster than the hopper speed. When too much item go into the filter, it will cause the signal that the comparator give out will be too strong and affect the ajacents modules. Using 41 items in the first slot will never break because the comparator give out a power-2 strength signal for 41 items and power-3 strength signal (which allows items to go through the hopper) for 42-64 items.

[@conorbooth]

@@Sam-vf5uc I'm trying your solution with 41 sorter items in slot 2, but when I put sorter items in the next hopper they get sucked away

[@Heilzmaker]

waterstreams can fuck up the system unloading slices next to it. learn redstone before you teach it.

[@awayqn7174]

quick tip, try this right now and you'll see it wont work

[@alexh5678]

Thank you both for all the videos that you make. When I see a SkulkerCraft upload notification it makes me happy. Keep doing what you do great!

[@deathlessgripp]

for those in 1.19.3+ using the hopper method: to avoid items getting stuck in the hoppers, you need to move the top layer UP by ONE BLOCK so the redstone torch from the top layer does not touch the hopper below (locking items from moving). you do NOT need to move the chests in the top layer up; they can stay in the same spot, you will just need an additional hopper for each module to reach the chests. there might be an easier way to solve this, but this is what worked for me.

[@fludster]

4 tutorials and millions of comments later, this was the fix i needed. It worked. Lots of thanks 😅

[@Zebokdk]

@@fludster Had this exact problem just now and decided to look into the comments. Your comment was top comment, thanks! Wish I had seen it before I built it though...

[@GusGusGames]

What is the supposed top layer

[@Zebokdk]

@@GusGusGames If you build the sorting system in two layers like he shows in the video, be sure to build the top layer one block higher than what he shows. The chests can be in the same position if you just add another set of hoppers, but the redstone parts all need to be one block higher.

[@GusGusGames]

If you move the top layer up then nothing locks like what

[@maalberg]

I have been here. Please upvote so people can see that I have been here.

[@DeadByWish]

Huh 😅😅 ??

[@ItalianDefence]

Of course man

[@varunboii]

Let's Make The whole comment section say their Pet names I'll go first DOBO obviously it's a Dog

[@snaggernauto]

Upvote

[@Hypnostedon]

Νο

[@jademonass2954]

the dropper elevator! thats the one thing i needed to finish my sorting system, thank you!

[@ToNi-n3d]

Does the sorter works ?

[@glaisymc_old]

Nice summary. Your first design has inspired my world's storage system. Tysm. :)

[@qmoney8284]

Thank you finally a sorting system that doesnt have insanely complex redstone that no one can decipher unless you are shulkercraft thanks man keep it up

[@Kittynator_]

sorting systems shown in this video are the easiest one, u just need to search "sorting system", most of them are like this. btw, nothing is really complex in redstone, u just need (like for anything) to learn it redstone is basically how computer works, u can do binary with it , thats how people do minecraft in minecraft without command blocks and i dont think that shulkercraft players are that good in redstone, they mostly just do insane and massive projects, but the redstone side is mostly from youtube

[@yay_inc]

Quick note: 3.15 I found that in 1.19.3, you must build the two sorters directly on top of each other. Other wise, if you are connecting them with hoppers, the items will get stuck in the first hopper near a redstone torch.

[@SmolHeliolisk]

IM HAVING THAT ISSUE RIGHT NOW What do you mean two sorters ontop of each other?

[@yay_inc]

@@SmolHeliolisk I’m a bit unclear…. So the second layer should be directly in line with the bottom layer, with two blocks in between the Redstone dust on the bottom and the Redstone dust on the top. Unfortunately I can’t send images in the comments, but I hope this helps!

[@BlueSiege01]

@@yay_inc can I talk to you on discord mate? I really want this to work, please!

[@onehourleft5892]

me rn #&#%&

[@qumbarbukhari7227]

i've tried a lot of different things but nothing seems to work, can I contact you on a different platform to further discus this issue

[@areksoo]

Water paths work better if they are adjacent to the hoppers as opposed to on top. Just have the water stream bend before going to the sorters and make sure that wall is all homey blocks. If done correctly, the items will be partially over the hoppers in the water stream. By setting it up this way, it fixes 2 problems outlined here. 1. You won't need a gap for the water streams. 2. 16 stack items sort perfectly fine.

[@Marcel_1864]

Thank you that one person here understand a normal Itemsorter in 2022

[@atomiq2707]

perfectly said, thank you. However you dont need to use honey blocks in particular. There are many other options aswell to aline the items. Chests, Enderchest, Trap Chest. Even sea pickles work if used correctly. :P

[@VincentKellen]

Is there a tutorial for that? I would love to make it, I hate wasting iron for hoppers

[@adrianadii_]

Adjacent on the chest side or redstone side? I'd assume the redstone side but just making sure.

[@baconking2745]

Thank you so much! I was worried about having too many items and them not being able to get into the hoppers fast enough, but your timing system at the input saved me!

[@dance_big5720]

3:51 tip- instead of glass blocks surrounding the water, you can use honey blocks so that they align themselves in a better way

[@Hundo_Mo]

This was a great breakdown. Impulse’s sorting system is like the gold standard. This was a great overview of how to build off of it

[@Heilzmaker]

gold standard for someone who doesn't know better

[@BakrAli10]

@@Heilzmaker what's the best then?

[@ajbs_alexo_713]

6:21 here you can double the input system's efficiency by putting a double chest with 2 distincts hopper lines linked to the dropper That way, the dropper will always drop something in the one directly above it At the top, you can simply link the last dropper into a water stream to avoid clogging

[@ottonsierpe2581]

how the hopper line that distribute the items in the first floor is working, when you have redstone torch above it?

[@OfMyOwnDesign]

If you are having trouble with items getting stuck in the hoppers at the beginning with the water method you need to rearrange the water elevator so that it turns a corner before any items reach a hopper. This way the items are on the edge of the hoppers.

[@pospik_pospicek]

Ty so much😀

[@jessebergroth7614]

Lifesaver I was having that exact problem

[@Zi4_Tin4]

Thank you so much!! 😊

[@samvkn]

Thanks brotha

[@goldradishyt7238]

IVE BEEN WAITING FOR THIS FOR LIKE 3 YEARS NOW THANK YOU SOO MUCH

[@Heilzmaker]

you wasted your life.

[@Kittynator_]

kzbin.info?search_query=sorting+system+minecraft just typed sorting system minecraft, those are same designs.

[@MrWhiteBlackie]

For anyone having troubles with the lower row of hoppers: at 3:26 in the video where he points out that you need an extra hopper, you actually need 2 extra hoppers for it to work so the redstone torches don‘t interfere with the lower row of hoppers

[@xafips4xafi466]

Om top of that other extra row??

[@xafips4xafi466]

On *

[@MrWhiteBlackie]

@@xafips4xafi466 yes, then you build the sorting module like normal from that extra extra row of hoppers

[@gingerwithsoul1891]

Yo, Im gonna try this tomorrow, Would you answer me a question? If i add a extra hopper will i need to change all the redstone behind it one block up or down aswell ? Or i just add the extra hoppers and it will be fixed ?

[@Angel_Ripoff]

Love your videos, always so creative and helpful! Your tutorials have a wonderful feel to them, as well, not too fast and not too slow.

[@zakariabelkacem9584]

It's too easy, thank you, this is my favorite channel

[@RedHeadForester]

Just been researching this sort of stuff recently, getting my head around it in order to build an automated storage system because my current little minecraft home is chock full of chests and shulker boxes of stuff. Thanks for the tips on chest and redstone displacement for 2 or 3 tiered storage.

[@feathered8339]

Amazing! I've been looking for a good tutorial for my server. Can't wait to add this!

[@Heilzmaker]

don't make this

[@kieran31016]

I was literally gonna build this yesterday, but i couldn’t find a tutorial i liked. thank you!

[@thomasaitken7495]

A couple things I do with mine. If you have your chests sloped (like stairs), you can feed from top to bottom, that way you only gotta pull from the bottom most chest. Stacks like eggs and buckets, each item counts as 4. I have a spot for buckets in mine, and haven't had any problems. But I also have 4 chests stacked for each slice. And like someone else stated, I use 40 place holders (renamed dirt) to avoid breaking the system. The number you need in the hopper is 45+1 to allow flow. I've become a fan with building storage in the basement. Input chest above it. This eliminates the need for an elevator.

[@jra6023]

I have fallen in love with shulkercraft videos :P edit: I watch even the stuff I already know cause he always adds useful info (water = more lag than hoppers, i searched for hours on google with no definite answer!...)

[@Filip_M]

for 16 item sorter you can put 4x multiple random items instead of 1, so your 41 limit will drop. so then you can use 1 item as item filter and also filter 16 item stacks

[@damusagi]

Wait that is so creepy. Me and my friend were discussing and building an automatic storage like 12 hours ago, and you uploaded this video 4 hours after we went to sleep.

[@Yoshi-wo1do]

I always use an alternating pattern with that sorting system because I like using water streams to transport items and as you metnioned it can cause the sorters nearby to break so when you alternate the pattern a bit with 2 additional blocks, nearby sorter tiles aren't affected anymore but it makes the build 1 block higer and reach 1 block farther into the back but at that small expense you can make it stable forever and overflow won't affect the sorting

[@konstick66-pepeland60]

A lot of people seems to be asking about sorting multiple items into one chest. There a a lot of designs called Multi item sorters(MIS) that do exactly this. They are actually cheaper considering how many items they can sort. And, it`s worth your time watching someone who actually invented the contraption and knows, how it works. Shulkercrafts survival series are cool, making tutorials on someone elses farm is not

[@JudeGilbertson]

Thankyou so much bro this is the first time i have ever built an auto sorter in minecraft

[@elnwfweflesjnflsjefnd8557]

you really posted this 10 minutes after I finnaly learnt it

[@rzonkill1763]

you have really good english my guy. Keep going

[@gordoncai5579]

omg didnt know implusetv made this! that's awesome!

[@ambinub]

wow really cool ! Thank you shulkercraft from finland !

[@DonBartolomeOfficial]

I just finished my storage system! If I had waited a little bit it would have been so much easier to do it with this tutorial lol

[@RifqiYT89]

Beautiful. Now this can be an elegant thing in my world

[@hermitwatcher8997]

ImpulseSV is the king of the auto storage sorter

[@kirkendauhl6990]

For the outer curves I’ve seen red stone brainiacs like Ilmango use exactly two (2) sea pickles on one block to align the items properly using a water sorting system. Idk if you can place them on glass but if you have an automatic shulker smasher sorter it’s probably useful to incorporate.

[@funwithariyan7347]

you can also use chests

[@FranksCreativeCorner]

Quick tip: Mumbo Jumbo has 2 mechanisms to sort unstackables: one with only redstone and a more recent one with allays. Just type unstackable sorter mumbo jumbo in the search box and it should pop up. Pro of the old design is it doesn't require allays, which are difficult to find, so it's alot simpler ti build. The downside is that it cannot distinguish between different kinds of unstackables (i.e. gold sword from chainmail chestplate), so you're limited to filtering stackables from unstackables only, and not sorting everything. Hope you find ut useful!

[@FliX7270]

A perfect underground base in my opinion is the best location for this storage system

[@motzias]

You are Finnish . I am absolutely in love with the Finnish accent

[@creeperminecraft294]

i like how just storing items is one of the most important part of this game

[@dedicatedplayz3614]

this video contains a lot of useful tips that I didn't know about! .This was a great breakdown. Impulse’s sorting system is like the gold standard. This was a great overview of how to build off of it.

[@Heilzmaker]

gold standard for someone who doesn't know better

[@keyslowmc]

I like how you made it on survival instead of other videos

[@Lumely1]

NO WAY you posted this video... Litteraly yesterday I looked for storage room designs and a month ago it happened the same thing but for the best minecraft armor... Pretty sure these guys can read in our viewer's mind... Thanks ! 😄

[@nomars4827]

For rare items that are usually less than 1 stack you can use just one "filter" hopper as a storage. As a bonus you can have up to five different slots for five item types With water distributing system it can be built even in quiet early game. Without iron farms.

[@tom2k527]

Actually you can sort 16 stack items, just put items in hopper like 1 38 1 1 1, also you dont have to waste 41 of item you want to sort, just make it 1 41 1 1 1 (first "1" is 1 item you want to sort, the rest is random named item)

[@Jarqueivies]

2:40 Since the total number of items in a sorter is 45, wouldn't it be better to spread 44 filler items into the 4 hopper slots on the right so that only 1 valuable item stays in the first slot? Wouldn't that also fix the problem with max 16 item stacks like eggs and snow balls?

[@refeying2698]

Yes every youtuber is just copying from each other with out putting a single thought into it. Just put 41 filter items in the second slot instead of 1 and you good to go

[@Jarqueivies]

@refeying2698 yeah, I've noticed that too. This design of stacking up 2 sorters on top of each other doesn't even work if you connect it all with hoppers because the redstone torch from to the top sorter clogs the passage

[@acb_gamez]

YOU DO NOT NEED TO PUT 41 good items in each sorter lol. Shows you clearly don't know what's happening. You just need the total to be 45. So put 44 of the sorter item in there (making sure all but one slot is filled in the hopper), and then put one of the item to be sorted in the final slot. The comparator is reading how full the hopper is, and the redstone torch is locking the hopper below that one. Once there are 46 items in there, the comparator outputs a signal strong enough (3) to trigger the repeater and disable the redstone torch, unlocking the hopper and allowing a single item to flow through the hopper thus bringing the item count back to 45 and re-locking the hopper below.

[@ProdyfiOri]

It breaks if you place them next to each other, so spacing is required. That's less efficient under most circumstances. Think twice before you criticize someone, thank you.

[@Preparationh1n1]

Great video thankyou! Helped me fix my system on my world with my nephew.

[@FliX7270]

I was just thinking to build a good storage system in my world n there we go a new upload

[@atomiq2707]

with the water option: you don't need the space after 8 blocks. If u just use another way to stop the water and not the pressureplate. E.g. open fence gates or signs. They will not make a redstone output once an item is flowing through it, though making it possible for a no-gap-chest layout :)

[@ChaineRubis]

You still need the ice block tho

[@atomiq2707]

@@ChaineRubis jo thats right, but i usually dont go with the water exactly on top of thr hopper. I build a 2nd row of ice next to the hopper and aline the items perfetly. This way items travel really fast and u can work efficiently with the chest layout

[@davidgathings4188]

@@atomiq2707 I'd like to see the design, working with ice and water is better efficiently even though I haven't made it that far in my world yet to gether ice to try this out, but water and ice from what I've seen is using a whole lot less of resources. Your thoughts?

[@ChaineRubis]

@@atomiq2707 do you have a suggestion of a tutorial with this methode ?

[@Kittynator_]

I also forgot to say that CubicMetre made a lot of videos about item sorters, so you can easily understand more about them, and make better storage rooms

[@YokeTB]

Doesnt work wiht hoppers instead of water. I just built a massive room for 5-6 hours. Now when I am finished i realize that the redstone torch from the second level of storage interfears with the hoppers from the lower level, so only the upper level works. Now i have to rebuild and rething the entire thing. Or somehow change to water....

[@austinneider8422]

Just came across the exact same problem... 😢

[@ProdyfiOri]

I think you might've connected the hoppers wrong or something

[@OctopusGamingRoblox]

With*

[@joeandjoe2]

Are the Comparators facing the wrong way ?

[@AndreFengo]

4:10 I figured out how to stack 3 laters on top of each other, while only taking up 6 blocks of space from the user's perspective. Gonna use it in my survival world.

[@DreamTeamDrvCraft]

I ran into a PROBLEM for the system I built just like as shown at 5:43. (hopper method) If you pause the video at this exact time, you can clearly see that the hoppers row transporting the items in the bottom chest part of the system are just blocked by the redstone torchs above it. This is a big problem because the items just get stuck when traveling down after going through all the top chest part and make it so you can't build it with the layout shown at 5:43. You should go with the water way to transport items with this layout or build the top filter system one block higher. If anyone has another solution I would appreciate, thanks for reading. (Since hopper connecting is pretty NOT self explanatory)

[@Ronakin]

I'm having the same problem

[@TutsMonos]

@@Ronakin Im having the same issue

[@MrWhiteBlackie]

just add 2 extra hoppers instead of only one extra hopper at 3:25

[@danielpitkanen9512]

@@MrWhiteBlackie On the bottom or on top??

[@MrWhiteBlackie]

@@danielpitkanen9512 on the top! just like he showed in the video at 3:25 but you add another extra hopper pointing down

[@Sn0wzer]

Guys if the items get stuck on the last hopper just put 3 sea pickles on the water source, the items should get a little stuck on the pickles, but they should float and get over the pickles so they have more height to get over the last hopper's ledge, that worked for me atleast.

[@BreadCraft_]

Waw, this is going to be useful to build the storage room of the seuvival world of our channel!! Thank you guys!!!

[@Kittynator_]

u made a shulkerfarm from cubicmetre but u still struggle with redstone? uh, learn basics pls

[@BreadCraft_]

@@Kittynator_ we have a raid farm for redstone

[@Ausfin85]

You don't need to spend 41 of your precious items! You just need 45 items in the hopper. So you can just dump 44 dirt and 1 of your item to be sorted! You just won't need to sort dirt. Unless you rename 4 items to sort your dirt first in your first hopper!

[@Nikolouska314]

No because if your two chests are full then the system will overflow and break, you need 41 of the filtered item in the first slot and 1 1 1 1 of filter block to avoid this. You can use this for rare materials that you are unlikely to collect two chests of them. But otherwise don't :)

[@123madesh3]

This is really needed for my hard-core world ty

[@drewhello2590]

Explained very well, thank you!

[@circadianvenus7119]

Does this work on bedrock? Please help someone thanks great video. Easy explanation!

[@pinkzki6473]

I love the break down of this video.

[@Retro2Smoove]

This man found every problem and gave y’all the solution 👏

[@coach4546]

0:34 to 0:40 sounds like he is rapping. bars

[@jasonclaassen2651]

Your explanation helped me alot. Ive been looking for a single chest sorter for poppies for my iron farm

[@Svisse90Gaming]

Aight, I need the FASTES sorting system cuz of lag!! So, what is the BEST you can do? I really NEED it!!! Love your content!!

[@Kittynator_]

u cant really go faster than hopper speed so...

[@TheRealDrwUi]

i love your accent :))) thank you, halped very much

[@bhagavvakammar8080]

Bro I like your all videos Your videos are super

[@XyZed1000]

I watched your previous tut about this, it's mostly built just have to decide on the last few items I want to sort, xbox one here and I paused the video when I heard you say....water system creates more lag than hoppers?? Up till now I thought the opposite was true? Believe me, just the redstone alone makes the room laggy! Can yourself or someone reading confirm? I'll now continue the video....😌

[@TheOriginalShakey]

this was very useful thank you

[@pompersuf5214]

Im totally gonna use this with the sophisticated backpacks mod 😁 and has even better capacity potential

[@totallynotbald7750]

when you build a second layer of chests does that require a separate input chest or can both layers be connected to each other?

[@Saiizu]

looking for an awnser on how to connect them up to.. my logical brain is thinking to drop a hopper at the end to then loop the items that didnt get sorted at the top over the lower "ring" but.. would have liked that explained

[@zambeska]

2:22 use egg or snowball for the filter item (don't forget to change names)

[@nathaniellufkin]

TIP1: Use a filler block like seeds instead of the filtered item for most of the items and fill the hopper immediately below with 4 Filter items to only pull those from the hopper above TIP2!!!!: Replace the redstone imediately in front of the comparator with a solid block, it reduces the Filler blocks from 44 to 21 Tip: Have the Filler block be the first Filter in the system with an overflow into lava, I use this for flowers in my iron farm as well

[@ansh_aditya]

Oooh No no no 😱🤯 it's the third time he reads my mind 🔥😶

[@funkymeerkat7293]

You can use a sea pickle to line the items for the hopper

[@tdub1776]

IMPROTANT: If you don't want 41 valuable diamonds (Or anything else) You can manually add more junk items and it will work perfectly fine, with less items stuck in the sorter. For instance, my sorting systems are formatted like so: (With the same redstone) For items stackable up to 64: 2 of the item I am sorting 40 junk items 1 junk item 1 junk item 1 junk item For items stackable up to 16: 2 of the item I am sorting 31 junk 1 junk 1 junk 1 junk For non-stackable it varies, but an allay sorting system guaranteed works for all non-stackable items. (If it's armor, you can use armor stands and a very sophisticated dispensing system, but it's really complicated, too much so to type. I think Raysworks has some designs. There are other ways to sort other unstackables, but again its complicated and unique per item.)

[@slavtrooper3851]

This way it won’t be overflow protected

[@Nikolouska314]

No because if your two chests are full then the system will overflow and break, you need 41 of the filtered item in the first slot and 1 1 1 1 of filter block to avoid this. You can use this for rare materials that you are unlikely to collect two chests of them. But otherwise don't :)

[@xoxo-di9kz]

just what i needed

[@Heilzmaker]

don't make this

[@xoxo-di9kz]

@@Heilzmaker yeah its too confusing anyway better off watching some other tutorial

[@bruce4139]

Video idea, get 1 double chest full for every wood item or every item that can be crafted by only wood, (you can use bamboo for sticks because sticks can be crafted from wood) get a double chest of every boat, every door type etc.

[@m-a-c-k]

Bruce what the fuck are you talking about

[@forax]

If you use 44 of the item you don't want to sort it works as well, for example, instead of 41 diamods, you leave 41 baked potatoes (and of course the other 3 slots completed, for a total of 44 placeholder items).

[@Spada7568]

CompaRRator i love this mans accent while talking english

[@xmorsln792]

His English is loud and clear!

[@ris_kis]

Thanks for the interesting video, I like it.

[@Theguywholikesguts12345]

get this epic man to 2 mill

[@XtSquish]

Thanks for this video I know what to build in my world now

[@sfisabbt]

It's not working for me and I don't understand what I've done wrong. I've built the 2 levels sorter with a hopper main line to move the items around like shown at 5:43 but in my build, the items get stuck in the lower level main line. I think the redstone torch of the upper level sorter activates the hopper beneath it and jams everything. Do you do something to avoid that?

[@cristianwesley1170]

me too

[@sfisabbt]

@@cristianwesley1170 Yeah, the 2 levels design doesn't work with hoppers but I could switch to water stream without destroying too much stuff.

[@chrismansour5191]

P.S.: If you're using the hopper method to move items, you cant stack the sorters since the redstone torch on the second layer will lock the hopper right below it on the hopper moving the items on the first layer. Tested it out in a creative world. Any tips on how to solve this? Edit: FIGURED IT OUT! You know how he said to build the second layer of the redstone part one block higher? Well do that, then move the WHOLE SECOND LAYER (redstone & chests) up ONE more block. That prevented the redstone torch from locking the hopper. It was fun figuring that out

[@Killerbeast62]

are you sure homie the hopper still lines up under the torch

[@Hosam736]

Very awesome clip

[@andrewpollock7803]

JaypeHDs video from about two months ago uses this design but does not require you to leave 41 of each block in the Hopper. Instead it lets you use the filter item instead. I would watch his video on this straight after if I was building this storage system

[@ondivcz]

Thank you so much i am just building new storage room in my world

[@chrisxgaming1166]

For anyone trying to use this sorting system and stacking it and using the hopper transport method put a two block gap and 1 forward or the bottom row transport won’t work

[@landertheforce]

were?

[@VincentKellen]

This is nice but please make the sorting system with water flow one. I don’t want to waste that much iron to craft hoppers.

[@xain9710]

7:00 I have a problem here, this timer works for me, but when the dropper becomes full, like all 9 slots contain an item, then the timer thing completely stops working so the dropper stops dropping the items, does anyone know how to fix this?

[@AgentSuddy]

Same

[@maxwell5247]

After completing my building project, I will build again your ultimate storage with sorting system for over 2 000 000 items

[@magarity1]

Could you please make a video on how to feed from multiple farms into a sorter? Everyone's sorter video talks about how to sort a lot of items but not how to deal with colliding carts coming from multiple farms. I've built the sorter and it works great, but I have 6 farms making a mix of 15 produce. Trying to get a single chest minecart to stop at each farm and then to the sorter has totally stumped me.

[@GameVegan]

You need 6 cart unloaders and a series of 6 water inputs into the system. Imagine a HHH shape, with the middle being the main stream to the sorter and each leg being the input from each farm :)

[@magarity1]

@@GameVegan I worked out a system where each farm feeds into a hopper and a single chest minecart makes the rounds to each farm's hopper then ends up at the sorter. Activator rails switch the tracks so the chest cart bypasses all the farms on the way out, then on the way back it stops at each.

[@nathkilljoy]

In the part he explains the accomodations for making it two level system that doesn't work at least for a 100% hopper system since if a hopper has a torch above it, it holds the items it receives

[@TarrynVenne]

I've seen a few different comments regarding the hopper method. I am currently struggling as the items get stuck in the lower level hopper under the redstone torch. Is the only way to fix this to build 2 blocks higher? Works great on the upper layer of sorters but the lower level get stuck!

[@aliabouelfetouh]

He’s back

[@亗AsAsIANGAMING]

Nicee 🤩🤩💯💯

[@darkhalo7405]

Thank you so much for this this really helped except can you cut out the second double chest and that hopper to save on iron?

[@mythix070]

Lari is like the young brother of Robin who likes to play around and enjoy but Robin is like the older brother who always leads and is mature