How to build a wide angle lens filter holder | 2 versions | Panasonic 7-14mm

[@Danny_KC]

Fantastic video and I am also preparing to make one with your technique with my fuji system. Yet as I was going through the web, I came past "The downside to the 100mm system is that the are just small enough that on some extreme wide angle there is vignetting in the extreme corners, particularly when the lens is focused to closest focus distance." Curious if that is an issue that you encountered when you applied the 100mm filters to your adapted setup. Thanks!

[@OneDegreeLife]

Hello! I have since changed out the 7-14mm for the 9mm; but not that I recall. I had to make sure the mounts were as far back on the lens barrel as possible so as to try and get the glass of the front filter to basically touch the built-in hood on the lens. This ensured that the rim of the filter was as far as possible out of view. If, however, you were to thread a hood like this on an ultrawide, because the "funnel" of the hood naturally extends forward and out, it very well might get in the way. Mounting it like this pushes the front lip of the filter BACK to basically EVEN with the lens front and extends it far to the side. I would do a test for you and send you a download link, but as I mentioned, I no longer have this particular optic. Suffice it to say that I don't remember it presenting any issues, and if anything, there was a slight crop in post. The good thing is, it's such a cheap setup it might be worth trying. Even without the addition of the filters. Best of luck!

[@stewartmckenzie4401]

CAN YOU TELL MR WHAT ADAPTER RING SIZE FOR THESIOTI HOLDER TO ORDER

[@OneDegreeLife]

I put all the items I used in the video description at the bottom.