How to Build an Unmanned Aerial Vehicle | Fixed Wing part1

  Рет қаралды 3,337

Lyndon's Workshop

Lyndon's Workshop

Күн бұрын

Пікірлер: 12
@flyhigh420
@flyhigh420 Жыл бұрын
Awesome! Great job with figuring everything out, I could feel your excitement once you got everything working, so cool!
@LyndonsWorkshop
@LyndonsWorkshop Жыл бұрын
I find it very stressful trying to fly a fixed wing until now. Just imagine hours if not days of work just turn to pieces after just a minute or two of flight. Now I have more flight time and a flying platform to experiment my electronics with. Thank you for watching.
@thepahadivlogs9103
@thepahadivlogs9103 2 ай бұрын
it will be helpful if you could provide dimension of the final design
@enzezan166
@enzezan166 Жыл бұрын
Great job bro.. l am also major in Pixhawk and PX4,but l make one contfrol algorithm on quadrotor to fly outside..Your work is useful for some fans..Congratulations.
@LyndonsWorkshop
@LyndonsWorkshop Жыл бұрын
Thank you. I try to share my builds to the community as easy to follow as I can. I’d like to inspire other people as I was inspired by others. Thank you for watching.
@MykhasV
@MykhasV Жыл бұрын
When doing compass calibration it is better to be far from any magnetic / metal stuff. So doing it this close to your car is not a perfect condition to do it. PS So nice to see you excited about flying!
@LyndonsWorkshop
@LyndonsWorkshop Жыл бұрын
You are absolutely right. Unfortunately this is the only place I can find outside our house to make the demo. A little further down the driveway will look awkward for passersby.😁
@CP-zi3eg
@CP-zi3eg Жыл бұрын
IMO the idea of sliding all stuff inside fuselage could be fine, but to afford on only one wood stick for fixing it could be a weak point... if it loses a bit the CG of airplane could move in flight. Anyway nice project !
@CP-zi3eg
@CP-zi3eg Жыл бұрын
Just for curiosity...does latest Mission Planner still support the old Pixhawk 1 ? Thank you
@LyndonsWorkshop
@LyndonsWorkshop Жыл бұрын
Hi CP-zi3eg. Thank you. There are actually 3 sticks. At the front, back, and through the clay(added weight). They just did not make it on the final cut.😁
@LyndonsWorkshop
@LyndonsWorkshop Жыл бұрын
@@CP-zi3eg I’m surprised it still worked on old pixhawk.
@dronefootage2778
@dronefootage2778 8 ай бұрын
I'm curious why you blurred out your GPS coordinates on all your videos because you are showing a lot of satellite views of your house so it was pretty easy to find, your house number is 8917 :)
How to Build an Elevon Plane | Fixed Wing part2
10:21
Lyndon's Workshop
Рет қаралды 704
Understanding the basics of Fixed wings
15:20
Lyndon's Workshop
Рет қаралды 1 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Inside the Horten Flying Wing
18:00
Blue Paw Print
Рет қаралды 3,4 МЛН
Flying a Plane Powered by AIR
16:43
Tom Stanton
Рет қаралды 3,2 МЛН
SR Merlin VTOL motor alignment
6:46
Vince Hogg
Рет қаралды 941
Building (And Crashing) my Homemade Surveillance Drone
16:55
Lafayette Systems
Рет қаралды 455 М.
Optimising a VTOL
21:14
Tom Stanton
Рет қаралды 2,7 МЛН
Wifi-Based Sentry | Ardurover Build part 3
30:25
Lyndon's Workshop
Рет қаралды 1,8 М.
This WEIRD Aircraft RUINED Flying For Me?!
11:04
Routes Above
Рет қаралды 312 М.
Introduction: Ed @ Experimental Airlines
5:16
Experimental Airlines
Рет қаралды 22 М.
How to build a Ground Control Station
5:43
Lyndon's Workshop
Рет қаралды 48 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН