How to Build Drill Press Stand with Storage│鑽床儲藏櫃 ➲ 『DIY』日曜大工

如果您喜歡我的視頻，請在KZbin上訂閱【Mr.V 被咖啡耽誤的木匠】頻道
打開小鈴鐺通知，第一時間觀看精彩的視頻！
Please subscribe to 【Mr.V 被咖啡耽誤的木匠】Channel on KZbin if you like my videos
Turn on the little bell🔔 notification, the first time to watch wonderful video！
--------------------------------------------------------------------------------
立式鑽床為方便操作通常會放在桌面上或櫃體。
利用這次工作室重新整理定位，使用夾板及集成角柱，簡易快速並省錢的製作這個櫃體。
若有需要做個小櫃體又想省點錢的D友可以參考參考
--------------------------------------------------------------------------------
對於影片有任何問題或建議都歡迎底下留言討論！！
Facebook： / mr.v.youtuber
Instagram： / viving0816
Twitter： / vivingwu
Song: "Sappheiros - Embrace [Chill]" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/Sappheir...

[@mr.v4702]

如果您對木作相關有任何問題或建議，歡迎底下留言討論！！ If you have any question or you would like to have a discussion about woodworking process, please leave a message below.🤓

[@woodenren]

頭香~

[@fredlewald8802]

An awsome project. I will take your ideas to built one stand for my carpentery as well. Addtional I will take Zolas idea with the wheels. Thanks for your practicl ideas. I like your channel. Cheers from Madrid Fred

[@mr.v4702]

Thanks very much. glad you're enjoying the videos！😃

[@elyr.9841]

A work of precision! congratulations👏👏👏👍

[@mr.v4702]

Thanks very much. glad you're enjoying the videos！😃

[@jeanloreaud9282]

Très joli travail bravo à bientôt salut Jeannot 🛠😉

[@mr.v4702]

Merci beaucoup. heureux que vous appréciez les vidéos！ 😃

[@СтаниславКасаткин-в2ф]

Классый ящик, себе такой-же сделаю!!!👍👍👍!!!

[@zolatanaffa87]

my solution (a few years ago) was made with L-shaped iron bars and pivoting wheels that can be locked at the foot because if I happen to drill long pieces, these collide with the walls. Your realization is very sturdy and useful but maybe in the future you will have to add the wheels. Yours as well as mine is multifunctional you putted the nailers and I the electric welder and all the related stuffs (not only wood in my shop but also iron, surely badly worked , but the paint works wonders) hi ando go ahead!

[@mr.v4702]

💕👌

[@ArdenDIY]

新機絲效率更好，只是有個問題，釘槍釘錯了怎麼處理，很沈，又沒頭

[@mr.v4702]

我是尾巴剪掉再重釘，對不對也不清楚~就亂搞~哈哈

[@yulhome]

真是漂亮的工具櫃, 請問你用的板材是哪種?

[@mr.v4702]

用的是六分夾板😀

[@PapyAndre]

merci

[@mr.v4702]

😆😋

[@kai2230]

桌腳這樣切非常危險，很容易夾住噴飛!建議靠山那邊加塊小木頭，推出之後才有空間。

[@mr.v4702]

可能是影片角度的關係，角料並沒有和靠山貼著，我知道長料或推鋸時不得推板和靠山同時依靠 但很謝謝你，之後在影片拍攝上我要多注意點，避免讓人誤解，尤其是對入門新手。

[@果菲]

想問一下抽屜內加上各種f釘，應該是蠻重的，沒有裝滑軌的抽屜，這樣會有不好推拉的感覺嗎？如果不會，我也想學著作，謝謝

[@mr.v4702]

這樣做只是比較簡單省錢，要磨細才比較不會卡卡，但也不能太重 當然和滑軌是不能比，可是滑軌也不能太重，就依你的考量（其實滑軌用了會回不去~哈）

[@果菲]

@@mr.v4702 真的

[@ЕвгенийГрищук-и1ч]

👍