Here is a tutorial on how to build the TLR aluminum diff housing which will work with the Front, Center, and Rear of your Losi 5ive T v1/2, 5ive B and WRC. Link below to purchase at DDM: www.davesmotor...
Пікірлер: 27
@coryyoung82893 жыл бұрын
Excellent video mate, nearly 1000 subs and very well deserved! Have you broken any arms on your Losi 5t 2.0? I heard it's a weak point?
@largescalercnation3 жыл бұрын
Thanks for the compliment Mate.. Cheers 🍻 Yes I’ve broken enough arms to make 2-3 sets of 5T’s 😂 going to test out the turtle arms and see how much longer they last.
@coryyoung82893 жыл бұрын
@@largescalercnation I just found the turtle ridgeback arms at DDM, are they stronger?
@Dan-em9sk2 жыл бұрын
I have never broken mine. I have changed them a few times. Especially the rears. Only cuz they get a pretty bad sand blasting from all the kick up
@Dan-em9sk2 жыл бұрын
Modified rc booted brakes really extend the life of the cups and pins. Try them out with the flm forever cups
@coryyoung82892 жыл бұрын
@@Dan-em9sk Hey Dan your post is appreciated and perfect timing! After 13 tanks my centre/front Dog bone pins are half way eaten and the front diff drive cup facing the centre diff will need replacing.! The front diff drive cup that holds the centre/front Dog bone is the worse, what's the best upgrade for that, Film doesn't make one from what I've seen
@01581Cody Жыл бұрын
Thank for taking the time to make this video. I’m ready to do mine now
@largescalercnation Жыл бұрын
Awesome! Thanks for the support and watching 👍💯🔥👊👊
@michaellucre82493 жыл бұрын
looking shiny, loving that MOD lightened 62t spur. Awesome sauce bruv
@largescalercnation3 жыл бұрын
Thanks Uce 👊😎
@JA-fn7le2 жыл бұрын
I would recommend synthetic grease in the bearings after cleaning them, not just thin oil.
@ntjack88943 жыл бұрын
Very informative thank you.
@johannesb.16586 ай бұрын
muss ich auch machen deine video is sehr nice
@Nickwillfixit3 жыл бұрын
I would double check your screws on the drive gear side, I have found that the Loctite does not work unless you clean the allen bolts of the machining fluid and also make sure no diff fluid contamonates the screws as again I have had screws back out as the Loctite did not hold has happened to me twice one when using the branded LOSI fluid the Kraken-RC fluid along with other brands I always use the Loctite brand of Red, Blue and the Green bearing glue.
@stevenpeters25933 жыл бұрын
Look not bad to work on it! 👍🏻
@wooty8721 Жыл бұрын
Great video, shaking a lot there mate, to much caffeine?
@largescalercnation Жыл бұрын
That’s exactly it ☕️🍻😂🤣 Cheers Mate!
@Victic00511 ай бұрын
This aluminum case will also work on the front and rear diff at the Losi 5ive-T 2.0?
@rollwiththepunches59323 жыл бұрын
Hey mate, which charger and receiver LIPO do use? . are you making a video on LIPO'S and chargers? im new to this and not sure where to store it, charge it etc
@largescalercnation3 жыл бұрын
I currently use the Hitec mini charger/balancer. Battery my first one and that I still use, is the factory Dynamite Lipo battery and now just tested and approve the Pulse 5000 mAh battery. They last a long time. Store in a lipo bag and in a cool area. I keep mine in my room wheee my truck sleeps 😂. The garage gets to hot for batteries and will possibly make them fail faster due to temps. The instructions on the battery info will tell you storing temps. Cheers 🍻
@mortonbeard2240 Жыл бұрын
Remove the dog bone pen and reinstall it so that the round section is "working".