How to Bump Start with a Rekluse Auto Clutch (Hydraulic Models)

[@Papparratzi]

Thanks for posting. You have no idea how many times I’ve corrected the old wives tale that you can’t bump start the autoclutch. Now people can see how it’s a no brainer quick solution.

[@E.FrankSmith]

I only wish i known before. Recommend this tip be added to the owners info fur us with hydro clutches. Thanks.

[@PkwyDrive13]

Can I still practice wheelies like normal if the bike has a z-start pro clutch? Like dump clutch wheelie practice? I have no experience with the clutch and I’m getting a used ktm 450 xcf that has one already

[@tylerwortman]

What happens to clutch wear if you ride a lot with it turned c-clockwise out?

[@tedjoslavianus1817]

Is rekluse auto clutch can be paired with quick shifter? That would be awesome to get lightning fast upshift or downshift

[@RekluseMotorSports]

Thanks for your question. Yes, auto clutches can work with quick shifter devices. To confirm for your case, give us a call at [phone] or e-mail us at [e-mail]

[@novendra_]

@@RekluseMotorSports how to install quickshifter on rekluse auto clutch?

[@novendra_]

@@RekluseMotorSports is it possible to only use the recluse auto clutch when upshift and downshift can use it without pulling the clutch lever?

[@RekluseMotorSports]

@@novendra_ the installation of a quick shifter should not be affected by an auto clutch. For whichever quick shifter you get, follow their supplied instructions. If you have any questions, feel free to reach us at [e-mail].

[@RekluseMotorSports]

@@novendra_ shifting the motorcycle remains the same. We recommend continuing to use the clutch lever while shifting, unless you have mastered the technique of power shifting.

[@deekshithm7754]

I didn't get can any one explain

[@270raptor]

How about a cable bike ?

[@RekluseMotorSports]

Thanks for you question. A video to explain bump starting for cable actuated models is still in the works. Stay tuned to our KZbin channel and "Tech Tips" playlist for updates. If your installed gap is adjusted using the clutch cable, you will simply need to remove tension from the cable and then you can bump start. If your auto clutch installed gap is adjusted internally via the pressure plate center adjuster or clutch hub ring adjuster, you will need to remove the clutch cover, close the installed gap, and you will then be able to bump start. For more assistance, you can give us a call at [phone].

[@LuckyNikitaBoba]

Yet. There’s no video for the rest of us with cable operated clutch.