How to Bypass The Key Chip Transponder In Any Car In 5 Minutes !!!

GO TO MY WEBSITE AND BMW FORUM !!!
www.nathansbmwworkshop.com
CLICK HERE TO WATCH PART 1
• How to Bypass The Key ...
CLICK HERE TO BUY YOUR NEXT CAR PARTS FROM MY AMAZON STORE
www.amazon.com/shop/influence...
How to Bypass The Key Chip Transponder In Any Car In 5 Minutes !!! his Will Work In Any Model Cars made By any manufacturer.
/ nathansdiygarage
/ nathansdiygarage
/ nathandiygarage
To see my other Channel "Nathan's MRE Click Below
/ @nathansmre
To see my other channel Nathan's World Click below
/ @nathansporscheworkshop
Send stuff to my PO box for products you want reviewed or for a shout out on the channel,
Nathans DIY Garage
PO BOX 115
Altenburg MO
63732 For Business Contact :
Nathan's BMW Workshop
Po Box 115 Altenburg Mo 63732
[e-mail]

[@brickmafiaindylocal317supe5]

Great info thanks Would the dealership keep a 01 e38 on hand? I've heard the dealership can run more like $300 ...?

[@carlmartinz8662]

Great video Nathan!

[@tigger126]

Some cars won't let you lock the doors with the chip close to ignition I believe

[@avonnboutan3428]

Thanks nathan, love the videos

[@aleycat100]

I bought a new battery solder re ed on I have a e38 2001 I noticed there's no transponder chip in the key but my car starts runs every time on my older e39 with the bigger key you could see the chip on the diamond shaped keys were is the chip located I've been manually operated my doors for 2 years now starting to wonder if someone bypass the ews but nothing has been touched on this car it was a one owner car from new even inspected the panels you can see they've never been removed any thought on this nathan's

[@Valorius]

What scanner or key reprogrammer will work with a 2008 BMW X3?

[@tljc6688]

thanks bro!

[@MrGazzaj]

Got a quote for a new key for a 2002 BMW X5 last week. $475.00 Australian dollars. I only have one key because we bought it 2nd hand.

[@richardlapera77]

Something is not right. Dealers and mfg are not going to allow purchase for$150 for a chipped working key when normal is over $400. What are the other charges not mentioned, like programming etc?

[@mrsmithaagbonmwanre2064]

Thanks for your videos. But can 2 new fob keys be programmed at this same time?

[@gzus1482]

Yes.

[@janreznak881]

Can you tell me please where the best place to tape the transponder in an E36 would be?

[@brianandrews7099]

On my OBD I e36, simply removing the chip from the key and taping it to the antenna (the black plastic trim ring surrounding the ignition lock cylinder) was not good enough. The car would start and stop fine with a “chipless” cut key; however, with the chip being taped to the antenna ring all the time, the EWS computer was always detecting the chip, so whenever you turned off the car and removed the key, get out of the car, and try to lock the doors, the car assumed that since the chip was still being detected, that the key was still in the ignition and that you were attempting to lock yourself out of the car. Whenever you tried to lock the doors (either with the key, with the door remote, or by leaving the window down and pushing the lock button down) with the key removed from the ignition, the power locks would take over and immediately unlock the doors. The solution I came up with was to get a second antenna ring from another e36 at the junkyard and wire it in circuit with the original antenna, but with one of the two wires passing through a 5 pin relay. The power to the relay was tapped from the ignition so that the relay only engaged the second antenna when the ignition switch was turned to the 2/3 position (ACC, start, and run) where the dash had power. You then tape the chip to your second antenna and hide it and the relay under the dash, behind the steering column area. By doing this, your “tricking” the anti-theft (EWS) computer into “thinking” that the key chip is no longer present whenever the dashboard loses power from the ignition switch. When the relay is powered, it introduces the signal of the second antenna into the circuit between the original antenna and the EWS computer. The EWS doesn’t know there has been a second antenna wired into the circuit; all it known is that when the ignition switch is turned to the first position, the chip is detected and all is good to start. When the ignition is switched off and the key removed, all the EWS knows is that the chip is no longer being detected and everything is normal to shut down the car for you to exit. So, yes just taping the chip to the ignition switch would have worked, but not being able to secure the interior of the car was not acceptable for me and I was also afraid that someday the chip would fall off the switch and get lost, which would not only leave me stranded, but force me to the dealership to order a replacement key and defeating any saving money. I found detailed instructions online that were meant for installing a remote starter (try googling it). Since the same basic principles apply, it was the perfect fix. As I remember it, you will need to play around with the position on the ring where you tape or glue the chip; it would not work just anywhere. I did this to my car almost two years ago (when I bought the car, it came with only one badly worn key) and has not given any trouble since. Also since doing this, I have also heard that there is a single wire behind the glove box that can be cut and will disable the EWS and shut off the anti-theft completely but since I have had 0 issues with it, I never looked into it any further.

[@NathansBMWWorkshop]

@@brianandrews7099 Obd1 e36 does not have a key chip, they started in late 1995 with the key chip and ews, you can use a red label ecu to delete the chip, or get a ecu chip that is flashed to delete the key chip all together

[@H0t.5tuff]

@@brianandrews7099 this is amazing; I want to do this, but I am having issues understanding the relay part. Can you do a diagram, please? Thank you

[@suhailasaba1051]

What's inside the chip ?

[@madgreen19]

Do you Necessarily have to take the vehicle to the dealer or can they just make the copy.

[@madgreen19]

I lost the 🔑

[@michaelherrin8711]

But you aint bypassing nothing you just taping the old chip. What if you dont have the old key

[@johnnyrodriguez8358]

Toyota wanted $420 for 2011 rav 4 key .

[@SydeshowMO]

I took my transponder out and now nothing works SMH. I have to push start my car to get it to start till I figure this out FML.

[@ryanreynolds7771]

Thanks for the video but those of us who own a 2005 Chrysler Crossfire made by Mercedes like the SLK 320 .We are in big trouble, Neither does Chrysler or Mercedes support this model any longer . I had bought a Chinese replacement key fob case which popped apart when it fell on the road at night and the transponder fell out never to be found I looked for it a week ,now I only have one key. And trying to get replacement parts for for this car like the SKREEM well it is impossible and makes you want to scream !!! I wish someone would create a bypass for such a complicated system on such an old car. Many of us who own these cars are having to trash our cars because there are no support for our cars and when you could get parts they were more than the car is worth .You can buy cheap mechanical parts but no electrical parts are available such as the remote keys or the SKREEM . it is so fustrating . There is a market because these cars were sold all over the world by Mercedes but no one has any interest in taking on anything aftermarket even a thing like a headlight or body panel or tailight. this car will be in the junk yard soon with no support. because no one can or willing to keep it alive . thanks

[@willromaine2252]

Still not enough. Why doesn't anyone quickly explain that it depends on the car. There are a number of ways to get it done depending on the individual car, number of keys and price while staying away from the dealer for the ultimate pay out.

[@lexiaontube]

Just wasted 4 mins

[@shahidbaig43]

where is the method to bypass in 5 minutes??????

[@jeremytaylor4576]

But taping a chip to the antenna isn’t bypassing shiz. Bypassing means to step around eliminating the need for it I.e. running jump wire from A skipping X and going straight to B, therefore when you find yourself losing keys you don’t have a chip to tape to the car now do ya? Ok so I need to bypass the transponder to get car to start. This is just giving it what it want permanently when you have it. Ok don’t have it. Now what, how do you ACTUALLY BYPASS thus step around the transponder to start the car?

[@kentwyman8175]

I FUCKING LOST MY ONLY TRANSPONDER KEY WTFFFFFF

[@martintodd5312]

Me too

[@Borrox2U]

Dont bother watching it's a complete waste of time.

[@DG-od4si]

when you take the key out of the ignition and the chip is taped the car will give you bing bing bing like you forgot the key why don't you show how to do it right ? what a waste of time

[@NathansBMWWorkshop]

D G that is not true at all, do some research before you comment , I broke it down in the video the different ways to deal with the bypass or replacing the key , if you don’t watch the whole video you will never learn anything

[@DG-od4si]

in my e39 i had to add a relay to stop the car from sensing the chip when the key is not inserted yes, i know what i'm talking about

[@H0t.5tuff]

@@DG-od4si can you explain how you did that?

[@DG-od4si]

you have to find the wire that is hot when the key is in and use a relay that the ring will be off when the key is out. kzbin.info/www/bejne/oaDNXmd-hKudhbM

[@zulfikranzulmos4066]

Wasted

[@euwhaynejohnaninon1450]

Too much talking,

[@basanistes359]

Get a dictionary and learn the meaning of the word "bypass". You obviously don't know.

[@braziltoomes1925]

totally pointless video stating the obvious unless your an alien