How to change air filter on a Fiat 500

[@juanoquendo]

All with one hand. I like it.

[@robouzounian7109]

it wasnt easy, but it all worked out in the end. I have since purchased a Gopro that i can attach to my head hahahah .

[@markbury141]

Good video, will add that parts supplies from Rock Auto are running local parts stores out of business.

[@davidvail1996]

Have you noticed a gain in HP and torque after changing to the new filter? I’m going to be changing my air filter in my 2012 Fiat 500 Sport to the high performance K&N air filter and was wondering if it was an immediate improvement

[@robouzounian7109]

Hi Dave, Not really. The K&N filter is so much better then a stock one, your going to notice something, even if its a small gain it will definitely be a gain! .. I've used K&N in some of my past cars and definitely noticed an increase in power and throttle response. good luck!

[@rennumphress9836]

I have the same car did you ever put one on?

[@davidvail1996]

@@rennumphress9836 i ended up getting a cold air intake instead. Found one locally and modified it to fit

[@Sam26LE]

I keep my engine without that multiair insulation cover,due hot weather ! Thank you !

[@robouzounian7109]

Yea, i actually never put mine back on after i made this video,, seems useless to me. just a cosmetic item. Thank you for watching!

[@noreenconroylpc9252]

The right angle driver is called an Allen wrench. Don't need to remove engine cover. Just do 3 screws and release hose. Then gently pull plastic housing out. Tabs on bottom. Noreen

[@robouzounian7109]

Thanks Noreen! if you like Fiat 500 content check out my other channel, its under the name GTyar.

[@bradleycrawford7398]

Lmao 🤣 I've never had to remove cover to change my filter and its actually an 8 mm wrench or socket

[@theinitiation03]

Great video man thank you so much!

[@robouzounian7109]

Thank you, I'm humbled.

[@victorsimensatto6]

Your video is very helpful, OBRIGADO!😅😁👏🏼

[@robouzounian7109]

Thanks Victor, I'm happy it was helpful.

[@teeranofficial7499]

Nice

[@beauusa11]

Why didn’t you use a 10mm socket and ratchet?

[@guvermintcheese9348]

FYI you only have to take the 3 screws out to change this filter . All the other stuff isn’t necessary. Save some time People

[@lindafletcher225]

Depends on your car. Not enough clearance for the filter without removing the cover on my car. Also, I need to remove the air intake for more slack like in the video.

[@dispatchprobec8341]

3:10 OUPSS , funny ...

[@wayneblackburn7805]

Just use a 1/4" ratchet and deep socket.

[@robouzounian7109]

Good call Wayne, that definitely makes it easier.

[@johneppenauer6772]

Could of saved yourself time by using a Ratchet and 8mm socket . And you took things off that didn't need to come off.