How To Change Cabin Air Filter 2016 F150

[@robertkowalke9675]

One of the best how to videos I have seen, short, to the point, and totally accurate. Makes me wonder if this guy is not a full time dealership mechanic. You have raised the bar for You Tube how to videos.

[@thefiXfiles]

Hey man thanks for the kind words! It's a goal of mine to respect people's time and keep the videos short and useful. Have a good one!

[@robertkowalke9675]

Keep up the good work. I have seen some real hacks out there.

[@Thetrainkid156]

If only everyone who volunteers to make a helpful DYI KZbin video could do it as well as this one was made. Thanks for taking the time to do this

[@gabyfernando4688]

Awesome video. To the point without telling us about the family history and what was for dinner. Thank you!

[@kerrylewis2581]

Thanks for making an easy job easy. It took me ten minutes from start to finish.

[@NoNonsenseKnowHow]

Best video by far! I like your pace man! And thumbs up for the no-nonsense!

[@takayama1638]

Thanks the fiX. I need to replace my 2015 with 19,000 miles. You have the best explanation I’ve found.

[@bra1nc417d]

Is it the same as 16'?

[@logan1572]

Though a simple topic for many, this is one of the best tutorials I've ever seen. Excellent. Thank you.

[@canadaguy20081]

Now that’s how you make an excellent no bs video . Great job . Step by step .

[@justanotherproject2day]

Excellent video! I watch it every 10,000 miles for a reminder of the steps to replace the cabin air filter!! Cheers!!!

[@thefiXfiles]

lol same here. One of these times I’ll remember how to do it 😂

[@DyscoJen]

This is a MUCH better video than the other ones I've TRIED to watch that had horrible sound and spent 12 minutes to show the same thing you did in 2. Thanks for the know-how.

[@sullivan6475]

I just paid $125 to have this replaced during my recall service appointment. Next time I’ll do it myself thanks to your video.

[@grandpashandymandiy4092]

I was going to make a video for changing my 2016 F150 XLT Cabin Filter but after watching your video it will not be necessary. Thanks and great job.

[@robertstonebreaker8394]

Never know different look might help some folks out

[@wilmoo1313]

Super video. Extremely accurate without wasting a lot of time. It took me a little over 10 minutes to do the entire job.

[@markd1882]

this is the best vid on how to replace the truck cabin filter! fast, clear, and accurate. just the way we like it

[@filymg1788]

Straight to the point,fast and clear. Thank you very much !

[@rdam771]

Did mine this afternoon thanks to this video. Short and to the point with good light and angles. Got to point out those little hinge tabs on the bottom of the filter door. It is possible to get the door on with one tab "out", so I removed it and started over.

[@brasha78]

Excellent video the only difference between my truck is I have a lariat and there’s another wood faux trim piece that you have to pop out to get to the 7 mm bolts. Thank you so much for the solid video.

[@RobertPlattBell]

real wood on the KR...

[@Watchdoc65]

Thanks! Got it done! One thing I would point out is to be careful when pulling out the upper glove box part because when you pull on it, there are little white clips (8 of them) behind it that can detach from that part!

[@TeufelHunden605]

Perfect video, thank you for keeping it simple for us folks that like to do the minor maintenance to our vehicles.

[@thefiXfiles]

Glad to help

[@HoppysBronco]

Thanks for the good camera angle of the filter door

[@JJWhitley]

Very Helpful. I never knew there was another glovebox.

[@bottomdweller5]

Thank you so much, very very helpful. The dealer charged me 50 bucks to change it, I had taken the truck in for an oil change and general maintenance. They had the filter out and told it was dirty, so I told go ahead and replace it since they already had it out. 50 bucks!

[@thefiXfiles]

Crazy man. Yeah they got me with that scam once. Never again!

[@allstar2709]

My dealer charged me 160

[@bottomdweller5]

@@allstar2709 YIKES! And I thought I got taken.

[@WereAllThatBored]

Thank you! I was told I had no cabin air filter due to some bad info on the Ecoboost forum when these first came out. It hasnt been changed in 75k miles. Absolutely disgusting.

[@RobertPlattBell]

Great video. On the King Ranch Edition, there's a wood trim strip that has to be removed in addition to the rubber floppy piece. I was able to hook a dental pick underneath it and pull gently and have it pop out. It's very easy to damage. Other than that, the replacement procedure was about the same.

[@ChevyGuy-kx7im]

I am replacing the cabin air filter in my daughter's 2016 F150 and your video was perfect. Thank you

[@kimberHD45]

Great video, well done. Especially having the common sense of omitting any unnecessary material.

[@sterlingsmith9348]

Thanks my friend! This was very helpful! Just replaced mine. Never changed since ownership. A big difference!

[@dakotamechelke7485]

Short, sweet, and to the point. Appreciate that.

[@maxmaximan8961]

Your explanation was very professional and totally educational.I just Subscribed to your channel,looking forward to visiting and viewing future videos of yours. Learning still after 36 year of being an auto mechanic,still with ever changing vehicle design,the learning never stops.Thank you and all other " good minds " That upload information such as yours.

[@chads3644]

Good video! This video was missing a specific step involved in removing a decorative trim piece above the rubber coin tray that is included in some upper trim levels. Found some help on another video for that.

[@Melodyktn]

Great video, got it done myself. I don’t think anyone’s ever changed the filter in this truck.

[@cruizin422]

Nice video, but you don't need to take out the glove box. Just remove the upper panel.

[@cailiqingsheng]

nice vid, much better than other ones for this job

[@scottbuick4192]

Great video. 1 small difference with mine was the rubber strip. It was in 2 pieces. A soft rubber piece on the ledge and a hard plastic along the back, that also just snaps in place. Otherwise identical, thanks for the video.

[@markcallanan361]

Best online video I've ever used, quick, clear, and to the point! Nice Job! fiX files

[@rollinreaper]

Thank you! Couldn’t figure out how to access after removing the main glove box. Much appreciated!

[@richardalewine9726]

Thanks, made this easy and dealer charges $50 total for this $15 project.

[@Coyote-pj1iu]

Richard Alewine my dealer told me $70

[@earl60446]

What, no stupid music playing, thumbs up just for that.

[@tomhamilton7994]

Great video! Short. Perfectly on point and done correctly. I wish they are all like this. Thank you!!!

[@AurnirSturmhrafn]

Thank you. This was easier than I thought it would be.

[@dutchynehtam]

Bought my ‘15 with 45k miles. Changing mine tomorrow. My cab doesn’t smell but probably worth changing anyway

[@darklight4815]

Just did mine..took less than 10 minutes...my glove box only has the 2 push in tabs on the sides and it drops right down...went with a Bosch hepa filter ,about the same price as the Ford filter..I don't think it matters too much though...thanks again.

[@richardegan4917]

Great video, to the point very clear,, concise and thanks for mentioning the 7mm socket saves lime searching !

[@ciphercode2298]

Just the way we like it,short n sweet. Thanks bud

[@ChuckKelly-po3rx]

Thanks for making it so simple, really helpful

[@CampDeclan]

If a perfect video exists, this is it!

[@stevemilchuck9241]

Thanks dude! All the stuff none of the fluff, great video!

[@MrGeoff67]

Thank you for the video. Thank you Ford for not making it easy.

[@Slicc_Vicc_]

Super concise and easily explained. Thanks

[@thefiXfiles]

Glad it helped!

[@howardbroadbent4766]

Great video. Made the job so much easier.

[@thefiXfiles]

Glad it helped

[@drhodesws627]

Great job KZbin professor! Thanks for your work.

[@steven2212]

Nice presentation. Saved me over 100 bucks. Thank you.

[@earl60446]

$100 !! , please tell us specifically who wanted to charge you a $100

[@tieng999]

Any dealer....@@earl60446

[@steven2212]

The dealer.

[@kakit03312]

Thank you! Did it in less than 5 mins!

[@carlshelton3064]

Nice and concise. Very well done.

[@thefiXfiles]

thanks! i watch a lot of how-to videos on youtube also and always appreciate it when people cut the fluff out and get right to the point. so i try my best to do the same.

[@jvmagnum12]

Great video replaced my cabin filter in about 2 minutes. Thanks

[@bendeco]

My filter was about 3x darker at 59k miles from the previous owner. So neglected. No more though. K&N fresh and clean air coming out the vents now.

[@Sikeslikescars]

Great video. Straight to the point.

[@patriqueperalta9892]

Thanks buddy, quick and easy. Appreciate you

[@frankiemadrid3295]

Bro this was a good an simple teach of this I thank u cause this helped out allot an for other I’m sure

[@JGHilde1]

NIcely done video! Just the perfect length for me!!

[@axleviggen6279]

Excellent video - super helpful and detailed. Thank you!

[@chiefnofeathers1067]

Good presentation. Easy do it yourself. Thanks

[@SirPhysical]

years later, thank you!

[@ricardocervantes9939]

Thx it was really easy to replace the filter

[@davesharp9656]

Hey brother, thanks for resisting the stupid music!! Nice clear narrative.

[@thefiXfiles]

Lol thanks. I try to keep the nonsense to a minimum and just get folks the information they need.

[@darwin7953]

Thanks a lot. Helped me save some bucks.

[@larrywaltzer5022]

Thanks for posting. Very helpful!

[@19BADGER-F250]

Simple and to the point. Thank you sir

[@jayfishing769]

Thanks video was perfect Easy change

[@hootsmagoon]

Thanks, from a clumsy idiot. Your video made this a super easy replacement.

[@ROR2379]

Thanks a lot for this Bro,Just I changed mine

[@boscoman69]

Awesome. Thanks, just don't do it enough to remember every move. Thanks.

[@firuzantahranci9277]

Excellent tutorial , thank you 🙏

[@hpm5382]

great walk through thank you very much

[@PhilFeedback]

Awesome, thanks for posting this video

[@mikejennings4063]

Perfect tutorial - THANIKS!!!!

[@Cha-y412]

OMG who knew? I have a 2016 F150 xlt since new. Ran across this video. I replaced the original cabin air filter it was disgusting black and full of dog hair from my Chocolate Labrador who goes everywhere with me. I will change it yearly as recommended.

[@ScottDLR]

Thx for this. What I dont get is why is there a switch for a light but no light?

[@RobertPlattBell]

there is a light in the glove box, at least on mine anyway...

[@itzelmancilla8784]

Very helpful thank you 😊

[@joekjoe1]

Thanks… great post

[@AdamAndersonFL]

Perfect video

[@carabooseOG]

the way all videos should be

[@beauxtx1959]

VERY helpful. Thanks!

[@NikonChicFL]

1:11 this part is tough. You can not rush!

[@Roland_finds]

Thanks a million!!❤️

[@tieng999]

Excellent video..tyty.

[@pierreducharme2471]

Great video thanks!

[@MartinezRE1]

Thank you for the video

[@thomassims9547]

Nice job thanks.

[@gordonhutchinson2949]

Well done!!!

[@robertstonebreaker8394]

Excellent thank you

[@grandpashandymandiy4092]

Excellent!

[@soeyesays]

Thank you, fiX

[@patpierce9816]

thanks for the info

[@paulgrimm7842]

Thanks

[@takayama1638]

Platinum screws are not behind rubber Thing. There’s still plastic covering them. Canno’ figure how to get it out

[@gale212]

Lariat is the same. Wood trim needs to be snapped out. Seems tougher than it should be. Pry from the bottom edge til it snaps

[@AlaskanAdventure]

Same with the King Ranch...small amount of prying on the bottom corner popped it right out...use a plastic spudge or something non-metallic to pry the bottom out enough to get a finger under to pull it out...

[@RobertPlattBell]

@@AlaskanAdventure that's real wood on the KR. 0.000001 mm thick. Thes rest is cheap ass ford plastic...

[@darklight4815]

awesome...thanks so much

[@someguy4476]

Thanks!

[@tonyglavan6282]

The only problem I am having is how to pop out the upper glove box part (starting around the 1:10 mark in the video). As he says, the plastic part can break. I don't have past experience getting those clips to release so now I am stuck. Any input would sure be welcome.

[@tonyglavan6282]

Update: I was able to finally get the clips to release. I used a small mirror to see where ALL the clips were and I used a air of pliers to help get the clips to finally move.

[@mikeanderson1330]

Uh, yeah. Way helpful thanks!

[@rottanwelding]

hell yeah .... thanks