How to Change Cabin Air Filter in Ford Escape 2020 - 2024

How to Replace Cabin Air Filter in Ford Escape 2020, 2021, 2022, 2023 and 2024 Quick and Easy Steps for replacing passenger cabin air filter.
In this video I show how to replace cabin air filter in Ford Escape Platinum, Ford Escape Active, Ford Escape ST-Line, Ford Escape Hybrid. Changing the engine air filter in Ford Escape is easy and straight forward process. Similar steps for engine air filter 2.5L, gasoline, hybrid electric, engine air filter 1.5 ecoboost, 2.0 ecoboost.
#fordescape #ford
How to Replace Cabin Air Filter in Ford Escape diy steps:
Park your car and make sure that the engine is off.
Go to the front passenger side and then open the door.
Look under the glove box and then find the bottom panel cover.
There are two screw caps (one at each end of the bottom panel cover). With your fingers, pull down the screw caps to remove them.
Carefully pull down the cover panel.
There’s a small Torx screw located at the bottom of the filter cover. Remove it with a T-20 Torx driver.
Remove the filter cover and then pull the cabin air filter out of the slot.
Insert the new cabin air filter into the slot.
Place the filter cover back in place and then fasten it with the Torx screw.
Push the cover panel back into place.
Reinstall the screw caps.
Ford Escape DIY How-To videos: • Ford Escape How-To
My Gears and Deals www.amazon.com/shop/hummansunson
As an Amazon Associate I earn from qualifying purchases
Disclaimer: Newroad assumes No liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Please consult your qualified auto technician.
Newroad cars channel

[@NewRoad]

Please leave your feedback/comments below, and if you enjoy this video - click like and subscribe to support our channel. Have a good day safe driving!

[@CanadaLifeVlogs]

Great

[@CanadaLifeVlogs]

Thanks, very detailed instructions

[@NewRoad]

Glad it was helpful!

[@chihyuanye7467]

so gooood !

[@NewRoad]

Glad it was helpful

[@DaveHandler]

Could you share the size of the screws? I bought a 2020 Eacape and the tabs were broken off and the screws are missing. Only thing holding the cover on is the little inserts on the bottom of the cover. If you could take two photos of the screw next to a penny AI can figure the size. Ford wants $53 for the hardware kit. Hope you can help!

[@NewRoad]

Common issue, those tabs are really thin and weak and easily break. I don't have that vehicle right now. Definitely no need to waste $53, just grab few at local hardware store that fit - they don't hold much anyway, just light cover