How to change fuel pump on 2013+ Triumph Street Triple / Daytona / Speed Triple

[@HugheZ33]

Very good straightforward video with clear instructions and great tips. Thank you!!

[@johnvillarreal750]

great video, it helped alot thanks

[@NikitaChe76]

Great video. thanks for the hard work. what is the working pressure of the fuel pump?

[@b2ridez279]

No clue

[@nousername4402]

Thank you!!!

[@David-xl9cp]

Thanks for the video, is the fuel sensor part of the unit, ie the pump and sensor are one item, altough the sensor can be removed from the pump

[@b2ridez279]

I believe it is, I dont recall anything else sitting in the tank. Someone may correct me.

[@David-xl9cp]

@@b2ridez279 I have had a closer look and the sensor is the black tube in the pump. Thanks for replying 👍

[@michaelcohen2392]

Do you need a torque wrench when putting the bolts back in for the plate

[@b2ridez279]

Hand tight is fine, as long as the rubber seal is compressed well enough (but not too much). No harm in using a torque wrench and using the proper spec if you find it!

[@michaelcohen2392]

@@b2ridez279 ok thanks

[@g7ost0p]

Where can I get that gasket?

[@jorgedelacruz3215]

Where did you buy the fuel pump?

[@Street765R]

Hello. Any ideas why 660 do not show fuel level at all?

[@b2ridez279]

1. Might do that until you ride it some after filling up. Needs a bit to recalibrate after refilling. 2. Check to see if power is getting to the fuel gauge. 3. Could be a defunct fuel pump. 4. Call a mechanic- an independent one preferably. Most chains will just tell you to bring it in. Leave a good review if they’re helpful.