Absolutely no need to touch the airbag or steering wheel to remove the barrel. You can just remove the upper and lower plastic cowling, which let's you remove the ignition barrel very easily.
@SonOfTheDevil6663 жыл бұрын
Jep I just did it myself with a Tigra tt very easy and got a scrapper cilinder and put the pins from the broken one in the nieuwe one and it works like the old thing all on 1 key
@AstroTheIcon Жыл бұрын
Yes is right.
@lovitziii4 жыл бұрын
I could not fix without this fine video thank-you
@JasonJ-zr1bd4 ай бұрын
Thank you saved me a lot of pain and time
@oztv6406 Жыл бұрын
Hello my friend. You did a great job and very professionally. I have a question for you. I accidentally installed the lock without before installing the plastic thermic. Is there any chance can I disassamble this lock group back without breaking it? I have to do this in order to install the plastic thermic group first.
@mechanicigor Жыл бұрын
Yes you can disassemble when ever you want just turn the key to ignition on and press the pin from the top and pull the key barrel
@oztv6406 Жыл бұрын
@@mechanicigor You are really GREAT MAN. LOVES from Türkiye. 🙏🏻
@stelion24 Жыл бұрын
Thank you very much for this video. Very, very, very good!😊😊😊
@SjakenAr4 жыл бұрын
Thanks for this helpful video. I was wondering where the transponder is hidden in the key, I can only see a computer print that controls the buttons....
@fawzansaani34634 жыл бұрын
Thanks alot I was soo confused but your video really helped me keep it up
@svenbuurkes699 Жыл бұрын
I bought a new cylinder but If I Only change the chip from old key to new key and change only the barrel zo not the pins would it work or not?
@mechanicigor Жыл бұрын
Yes it will work
@jasonthomas1963 жыл бұрын
I followed your video with great success thank you,now my steering lock keeps coming on any ideas? Thanks in advance
@simbad-4724 Жыл бұрын
Hi, please, when the mine barrel is broken and rotate key in second position, turn it self back in first position ? And, do the light work in first position ?
@mechanicigor11 ай бұрын
You have to replace the barrel in ignition on position
@maxycamara4954 жыл бұрын
Hi !! Your video is really helping a lot wow !!! Thanks a lot ! Thanks to have people like you sharing really !!! Respect !!! I have a question, I’m trying to change it also but I have a problem. On your video at (5:40min) I cant take it out. Because I can’t turn my key to standard or to position 1,2. My key don’t want to turn. I can’t start the car, impossible to turn the key. So I can’t take it out. Do you have solution ? I think if I don’t turn the key it’s impossible right ?? Can you help me. Thanks
@mechanicigor4 жыл бұрын
Yes you have to turn ignition on to remove the barrel if you can't turn it then you have to drill it so you can turn it in ignition on position
@maxycamara4954 жыл бұрын
mechanic for cars thanks for the answer. To drill it ? What you mean ? How ? Thank you !
@mechanicigor4 жыл бұрын
@@maxycamara495 you take drilling machine and drill where you put the key so when you damage mechanism inside you can turn the key or you can take to specialist and let him do the job he can do it without drilling
@Gamefreak_0_02 жыл бұрын
Hello i have a question. Do i need to change the chip? otherwise it wil not work? what is the meaning of the chip actually? thnks
@mechanicigor2 жыл бұрын
That chip is your code for ignition without the car won't start and work that's the immobilizer
@Gamefreak_0_02 жыл бұрын
@@mechanicigor thnks a lot 👊🏻🙏🏻
@muhammadabdalhadi9571 Жыл бұрын
Thanks ❤
@mechanicigor Жыл бұрын
You're welcome 😊
@astar13072 жыл бұрын
How do I sort out the pins I am struggling
@mechanicigor2 жыл бұрын
It's difficult to explain install them in the same position you removed them from old cylinder if you mixed them up then install them and put the key in and those who are bigger than the cylinder grind them with sandpaper or similar
@Hellaorj3 жыл бұрын
I change the ignition but now my car is making a beeping noise. When its turned off. I can hear it from the boot.
@jacoszek13 жыл бұрын
Good video but you didn'nt have to take off the sterling whell. All operation takes 15 minutes. Greatings
@mechanicigor3 жыл бұрын
I know but I had to remove so I can show on camera where should be pressed
@MrDoenY4 жыл бұрын
Hey, I have a problem at 11:20min. I cant put the ignition barrel back into position. How did you do it right, I think you skiped the part? PS: Nice video mate! Cheers
@mechanicigor4 жыл бұрын
Sorry about that with screwdriver you have to push up one part of locking mechanism inside and then you can install the barrel in ignition on position
@SonOfTheDevil6663 жыл бұрын
Why are you taking off the steering wheel you don’t need to dothat I just did it with a Opel Tigra twin top 2006 and The only thing you need to do is take the covers off by the top one it’s two clips and the bottom one is three screws then you take the window washer thing out with two clamps don’t need to unplug it then you look at the top And with the same screwdriver you removed the screws with you can press the button between two bars on top of the ignition cylinder Press that down and turn the key and it will pop out If I’m right 1 maybe 2 And putting it back together make sure the key is in the same position as if you look in the hole It has to be horizontal and make sure you don’t have the steering lock on you can press it down with a screwdriver and it has to be all the way down you can hear a click and don’t touch the steering the easiest way to make sure the key is in the right position there is a button on the cylinder and has to be so you can press it all the way down
@mechanicigor3 жыл бұрын
I know it can be done but I can't film it like that because nothing is going to be seen that's why I removed steering wheel