How to Change Mower Blades on Husqvarna Riding Mower

In this short video I show you how to change the blades step-by-step on a Husqvarna riding lawn mower. Be sure to give the video a thumbs up if you found it helpful! Thank you!
Husqvarna Blades (48 inch Deck): amzn.to/3iNXD2r
Husqvarna Blades (46 inch Deck): amzn.to/3BuRXBZ
Amazon Affiliate Links
how to change mower blades on husqvarna riding mower
husqvarna riding mower blade replacement

[@lmontes09]

Thank you sir for your video. I think your video reflects more than simply changing mower blades. It demonstrates the advantages of removing the deck exposing any potential issues and allows for greater access. I perform this task yearly and prefer to inspect and service all at once. Heck, I even take the time to scape and clean under the deck. Good job!👍

[@generudzewicz4877]

Excellent. Clear presentation without any silly distractions.

[@SgtJoeSmith]

i just lift front of mower up with cable hoist, pop them off with impact. im done in about 10 minutes

[@jessy9148]

Thank you just what I needed I also needed to replace some fittings

[@5MinuteFixit]

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!

[@gregorykendrick7917]

Very nice video. I changed my blades today (with help from my brothers) and your video gave me the confidence to tackle the job. Everything worked out well. Thanks for an easy to follow and 'no fluff' presentation.

[@5MinuteFixit]

Thank you for the compliment on the presentation! Thank you for watching!

[@itslit3511]

Thank you man. Saves me so much time and headache

[@5MinuteFixit]

Thank you for watching! I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!

[@barefoot.bandit]

OK this teaches you how to take the deck off but in no way is it necessary for changing blades or greasing deck.

[@terryuland6502]

Yea I just jacked up the mower and zipped them off with an impact. What's missing here is the torque spec for the blade bolts. From Husqvarna: "For the 7/16 GR 8 bolts (5/8" wrench) used on some mowers, torque to 45-55 ft lbs."

[@hthalljr]

Thanks for the clear description. Can you recommend the greases you used: for the zircs, spray-on lithium compound, and anti-siezing compound?

[@beckyvaladez283]

Excellent! Thanks!

[@5MinuteFixit]

Thank you for the compliment and for watching! Be sure to check out my other mower videos if you are interested! Thank you!

[@btrain2546]

Excellent & informative video - Thank you keeping it to the point and simple and not rambling on like so many of these other clickbait lovin douchebags who won't STFU. Much respect!

[@5MinuteFixit]

Thank you for watching! That’s exactly how I like to make my videos so thanks for the compliment! Be sure to check out my mower maintenance videos if you are interested! Thanks again!

[@Squad-pl7oo]

On your Husqvarna when you increase your engine speed do your blades spin the same speed or faster

[@5MinuteFixit]

As you increase engine rpm, blade rpm increases as well. Thank you for watching and be sure to check out my other husqvarna mower maintenance videos if you are interested! Thank you!

[@catjuice8420]

I learn more on KZbin than most places

[@5MinuteFixit]

Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

[@AnneLePecheur]

What to do if you can’t loose the bolt. What is the best way to go about it?

[@ryanlewis8093]

Breaker bar, or if you just have a socket, a hollow steel pipe for more leverage, or an impact wrench.

[@jessjohnson-rocks]

Oxygen/acetylene torch till red, then loosen. Just don't pull the air lever! Lol

[@4Fingers]

SAVE YOURSELF THE HEADACHE! You don't have to remove the deck at all. You can reach right through the discharge side and just pry the deck up a few inches and block the other side. The important thing you left out is these decks have a normal thread. Righty tighty lefty loosey. 5 minute fix!

[@richardlinn5512]

45 TO 55 FT.LB. [50]

[@akgraywolf1]

Could be shortened to half its current length with no problems.

[@jessjohnson-rocks]

What about alignment? Doesn't matter?