HOW TO CHANGE O RING & FILTER ON FUEL INJECTOR

This is a DIY change of o-ring and filter and testing of fuel injector on 2002 Mazda Protege 2.0L.
You can comment, like & pls. subscribe. Thank you.
/ @timpaps

[@timpaps]

Hello! Welcome to my channel, hope the video helps and can you guys subscribe and help me grow my KZbin channel pls. Thanks a lot and I appreciate it very much.💚🙏👍

[@noey5766]

Thanks for the demonstration! I like your idea of the washer lubricated with the oil. Did not expect the microfilter would have been that hard to remove.

[@timpaps]

You're welcome and thank you too. Regards and Aloha! 🤙

[@baushun332]

Can i use engine oil as lubricant? And what if i buy different size, does it matter if i have good seal?

[@timpaps]

I lubricate the o-ring with clean unused engine oil. The size of the new o-ring must be the same as the old one, if small it will leak, if big it will not go in. Thank you for watching and for your interest in my videos.

[@baushun332]

​@@timpapsso i only need a good seal.

[@baushun332]

​@@timpapsthankyou for taking your time to reply

[@timpaps]

@@baushun332 You're welcome, thanks.

[@timpaps]

@@baushun332 That's the purpose of the o-ring.

[@jamesmichael8549]

Is that safe to place a car oil to those rings ? That's gonna catch fire ? My question is do you have to push it inside the rail those o rings ? My o rings just dont want to go inside the rail .Mines I used my car oil is that ok and is it safe ?

[@timpaps]

That's the purpose of the oil to lubricate the o-ring so that it'll go in easily. The o-ring is designed to a high temp. application, if it's an ordinary rubber it would start a fire even if you don't put oil on it. My car is running ever since and it didn't catch fire yet. Thank you for your interest in my video.

[@jamesmichael8549]

@@timpaps I have a question in my O rings near to the s witch the one that goes to the rail does that O rings near the switch goes all the way in ? Or the O rings just make it a little tighten so it will hold and not leak ? I had a Toyota Camry 2001 LE 2.2 Litter 4 Cyl

[@timpaps]

@@jamesmichael8549 Must go in all the way otherwise you have the wrong size o-ring. Thanks!

[@vioreliancu9674]

Bună! De Unde pot cumpăra minifiltrele pentru injector ? Mulțumesc.

[@abdouallahuniverse5689]

What kind of cleaner are using to clean the injector? And what kind of lubricant you used on the orings?

[@timpaps]

I used carburetor cleaner and unused clean motor oil.

[@baushun332]

​@@timpapsmotor oil, engine oil, are they same?

[@timpaps]

@@baushun332 Yes

[@mattjairus2452]

Do you know what is the size of the O rings?

[@timpaps]

Hello Matt, thank you for watching. I don't know the size, I just Google searched a kit that match my car and I found it on Ebay. If your car is the same as mine, here's the kit #84212244 on Ebay.

[@robertcortez3370]

What do you use to lubricate the O rings?

[@timpaps]

Clean and unused motor oil. Thanks for watching and for your interest in my videos.

[@noramira5425]

Well done ✅ 👍👍👍

[@timpaps]

Thank you, regards and Aloha! 🤙