How to Change Oil And Filter Kawasaki Ninja 250 10w40 oil, ninja 250 oil filter fram ch6012 Keep your oil golden brown. PwnsJones Pwns Jones
Пікірлер: 126
@yunged79018 жыл бұрын
you totally put the small o ring in the wrong place, and never saw you take the old one out from where it actually is.
@zombierider94238 жыл бұрын
"There's oil everywhere!" That tends to happen.. when you know... you change the oil. Lmao
@pequenaudtekno29096 жыл бұрын
haha i don't understand why this video isn't a meme. socket set to the face, doesn't know where the o-ring goes and uses the wrong oil. you cheered me up big time. cheers
@xmajesticmoosex11 жыл бұрын
I enjoyed watching this because of your comedic relief to your awkward mess ups that would have made me feel bad when I do it. hahaha
@Jake9517168 жыл бұрын
You should probably do this more than once before you make a tutorial video.
@Kziap10 жыл бұрын
This actually helped me. I just changed my oil about 2 weeks ago. 2012 Ninja 250. I've got 3k miles on it now.
@kyleking74399 жыл бұрын
Your videos are so helpful!! Thank you for posting them. Great camera angles too!
@samuelruiz18545 жыл бұрын
I really enjoyed the video but the comments make me feel like I can’t trust this guy with how I treat my precious ninja
@YouMotorcycle3 жыл бұрын
You're right to think that. Watching this like you watch a train wreck :\
@ali1t12 жыл бұрын
There's a metal washer on the old filter that you need to swap into the new filter, it usually sticks to it when you take it out. Also when you "prime" the new o-ring, you should just dip your finger in the oil and coat it, run your hands around the entire thing, no need to dip it in the bucket with oil, just makes more of a mess..
@nolanshortes11 жыл бұрын
Great video quality, just bought a ninja250r and gunna change the oil in the morning :)
@kmweaver256 жыл бұрын
Thanks for the laughter .. and the advice
@jessysimpson629810 жыл бұрын
thanks bro, just got a 2010 ninja 250r S.E. :D
@willthethrill52111 жыл бұрын
great comical tutorial. thanks for posting
@gulshoaib53489 жыл бұрын
Helpful video, thanks! Does anyone know can this be done without a torque wrench? As in using an ordinary wrench, and just being careful not to overtighten the filter bolt in the end?
@m_pcv12 жыл бұрын
It helps if you open the Oil filler cap before draining the oil.
@ChaosBW5 жыл бұрын
He did this with bare hands The absolute mad lad
@Daxdax006Ай бұрын
And?
@drucollier18953 жыл бұрын
Bro i love the commentary
@bigdaddymatt278 жыл бұрын
still better than stealership charging 60 plus for 1
@izzyrodriguez80853 жыл бұрын
The small o ring doesn't go where u put it, u separate the bolt and plate and it goes right before bolt head you'll see the ridge for it and old o ring...
@rumblebee42049 жыл бұрын
Good video. Gonna try and do an oil change on my 2010 250r. Hey where do you live?
@crash21718 жыл бұрын
Hello mate,, do you know if the front suspensión (forks), can be changed for a kind of forks you can regulate preload, compresion, extensión in a ninja 250r 2011?
@SlimShadyJr8379 жыл бұрын
Thank you!
@macauleymills7455 жыл бұрын
I had my oil filter and oil change but when I got it back the oil was still black I want to do it myself as I feel the garage didn’t do a good enough job do I just under the two bolts or do I still need to remove the filter so I get all the old oil out thanks
@chingybrejin797011 жыл бұрын
necessary to do oil change before winterization...I am in Toronto, Canada and it gets cold here like -20 C
@edgardocervantes85634 жыл бұрын
Old Video, Still Helpful. Youre fucking awesome
@MarcoMendez305010 жыл бұрын
cool thanks. I do it for myself.
@mrs.heatherdaves231311 жыл бұрын
Cool.....What Year 250's Did You Have ?
@wingnut12312 жыл бұрын
The smaller o-ring for the filter doesn't go on top of the filter element, it wraps around the stem at the base of the oil filter plate. It's supposed to be removed and replaced.
@siomokof34256 жыл бұрын
What happens if he doesn’t fix this problem?
@S1kr201610 жыл бұрын
Thx ended to do this
@6cmc912 жыл бұрын
yeahhh budddy preciate it
@qw43gdtyghdrth9 жыл бұрын
Also make sure you do it after your bike is well warmed up! ;)
@TheKardain6 жыл бұрын
Thanks, too many videos end up not actually showing what I type, + your commentary made it nicer to watch, thanks bro Edit: oh the reason I watched this was because Im stupid, and forgot to put the cap back on after putting oil in, then got back home and a whole ton of it poured out (I'm guessing from the overflow), I might of put too much in but its not leaking now, but was mainly looking to know how much the max was, arounds 1.7 liters, thanks since the gauge shows oil now and its not leaking =/ heh
@wingnut12312 жыл бұрын
Also, you want to start the bike up and let the oil circulate through the filter and then shut it off, let it sit for 5 minutes so the oil can drip back down and then top off the oil to the correct level.
@whitestang0210 жыл бұрын
Dude the ninja uses a wet clutch system where the motor and clutch use the same oil. Use motorcycle additive oil! Your tear all sorts of stuff up. BTW coming from an 09 250r rider who learned a lesson.
@motoskuniu68113 жыл бұрын
Thx! 💪🏻🏍️💪🏻
@jakefromstatefarm138 жыл бұрын
where did you buy those rubber pieces ?
@chrismedycki801110 жыл бұрын
Alright, I just got a 98 ninja 250, the oil needs to be changed, I was going to get fram but I have been seeing a bit of hate in the comments on fram... So what should I be looking at?
@FP5Gaming10 жыл бұрын
K&N?
@nismoknightproductions33614 жыл бұрын
did u buy that oil at your local auto parts store
@dovydasjackevicius47368 жыл бұрын
Question should I use the oil that you used for this video or should I use the recommended
@killerturkey1000TheKing6 жыл бұрын
Dovydas Jackevicius i know this was two years ago now. Don’t follow this tutorial.. use recommended MOTORCYCLE oil. Not car oil.
@satiacumd096 жыл бұрын
This girl uses motul😂and k&n.
@Hootization11 жыл бұрын
FYI... for anyone wanting to do an oil change for this bike, DO NOT follow this video step by step. I understand this is an old video and the mistakes made may have been realized. One the small o-ring gasket goes further down the filter bolt, it can be found upon disassembly of the filter. Also there should be an aluminum washer that goes between the spring and the filter during assembly, it looks like it was missing in this video.
@mohdsya74085 жыл бұрын
Yes.. That metal washer .. He's forgot
@markyea45857 жыл бұрын
HE PUT THE SMALL O RING IN THE TOTALLY WRONG PLACE HENCE NOT SEEING HIM REMOVE THE OLD ONE! PUSH THE SHAFT OUT OF THE ROUND FILTER PLATE AND YOU WILL SEE THE SMALL O RING AROUND THE SHAFT IN THERE
@siomokof34256 жыл бұрын
What happens if he doesn’t fix this problem?
@mohdsya74085 жыл бұрын
@@siomokof3425 may not affecting.
@namdang45919 жыл бұрын
what does it mean when the oil pressure warning light comes on?... idk what to do lol... i have a kawasaki ninja 250r too :(
@RebelxI9 жыл бұрын
Is it on the whole time, or just after you start the bike after it's been ridden/idle?
@LegendarySerpentX4 жыл бұрын
watching you change this oil was painful..what a fckin mess everywhere..well wish me luck i'm about to make the same fckin mess all over my driveway and hands.. Thanks for the instructional (the moment when u debate watching another video on how to do it but ur like nah fck it. I got this.)
@ChristopherWalters02411 жыл бұрын
Yeah you def should use motercycle oil, its different than regular motor oil because it also lubricates the clutch. Do NOT use motor oil!!!! You can find the filter and the right motorcycle oil at your local Walmart.
@tomasnokechtesledger17865 жыл бұрын
That´s what I use in my ZX9R. Thick cheapo oil. I like the promos. But you changed too soon, IMO. It was all too clean by the filter you can see the cleaniness of this oil charge.
@PwnsJones12 жыл бұрын
the second drain is pretty much useless, don't even know why it is there. you should be fine.
@PwnsJones12 жыл бұрын
they are both oil drains yes.
@loyddaez21466 жыл бұрын
PwnsJones I was so scared what I have done so there's two slots
@kostadinpantev25 күн бұрын
If this Castrol GTX is not a dedicated motorcycle oil, and it does not look like it, yourare ruining the clutch.
@Daniel-Clearwater4 жыл бұрын
so that little o ring doesn't go there maybe suggested by other people that you do if you I or changes before you do it tutorial video
@TekniqueGaming10 жыл бұрын
What are the pros of changing the oil filter?
@brandynkelly931910 жыл бұрын
the oil filter catches any pieces of junk whether it be small pieces of metal or other things so if its full then the oil cant pass through it and wont filter the oil so youll have dirty oil and you dont want that stuff running through your gears or engine.
@hooptylife10 жыл бұрын
Absolutely nothing.... Also never change your oil it works better that way. And just drain your all your coolant. Its for bitchs my boosted gixxer doesn't have any fluids. weight reduction.
@lambofsquirrel8 жыл бұрын
+john L what he said
@harmoniejaszbarangan14305 жыл бұрын
how many liters oil sir for my ninja 250cc 2013 model
@theclinger5 жыл бұрын
You'll need almost 2.
@keltingr8 жыл бұрын
Castrol car oil in your bike bro???
@Thefirsts10 жыл бұрын
How come when I look at the oil gauge on the side it's pitch black and I don't see anything? Is that bad.... O.o
@syriangamer8910 жыл бұрын
I would guess you are probably wayyyy over due on an oil change
@steveanderson57347 жыл бұрын
always use motorcycle oil in motorcycles. car oil can cause your clutch to slip and warp the plates. no Bueno.
@krystalknotts6410 жыл бұрын
Haha! Because I bought it from a girl! Lmfao! Did you not think the oil was gonna pour out when you took the filter off ;). Your to cutie...haha Now let me go flush my coolant and change my oil. Thank you!
@PwnsJones10 жыл бұрын
It's all in the wrist.
@krystalknotts6410 жыл бұрын
Sure...haha
@blueracer6610 жыл бұрын
A *perfect* woman appears.
@satiacumd096 жыл бұрын
This girl done her bike. Now im gonna do my husbands bike. The slow motion smacking yourself was pretty cool.
@theclinger5 жыл бұрын
One of the engine mounting bolts was missing on the used bike I bought, with two random wrong bolts half jammed in it's place. Also the oil is black. What exactly does "lady ridden" mean in a motorcycle ad anyway?
@loyddaez21466 жыл бұрын
Oh okay so there's two oil drain one it points out in the side and one downward.
@matt1232318 жыл бұрын
Put the oring in the sun for a while to get the kinks out and its half sight glass not the full sight glass .Still cant believe you used car oil. Every sight glass on ALL equipment in the world is standardized to be half full when the equipment is full...so you can see it.Over filling will cause the crank shaft to froth the oil and will starve the motor just the same as if there was no oil.
@obaidqureshi40643 ай бұрын
I bought it after 12 years 🗿
@showstopper32610 жыл бұрын
Anyone else think of Landry from Friday Night Lights (The TV Version)
@grimlin91110 жыл бұрын
Eh not really... Landry is a little goofier
@UniversalCelebrity11 жыл бұрын
We'll Have To Get Your Bike Rolling Again !
@kylenightingale13917 жыл бұрын
ok so it's 10 years old and your doing a break in period?
@westboundNinja16 жыл бұрын
Kyle Nightingale I just bought a 07 250 and it only had 300 miles on it. Also had a break-in period. Not too uncommon.
@leebob80324 жыл бұрын
Yey girls bike
@CommunityFights11 жыл бұрын
should be using motorcycle oil bud
@RatedA4Aliens5 жыл бұрын
Where were the mens fingers? All I saw were ladies fingers. Woooo
@ovaismirza91084 жыл бұрын
Do u hav facebook or instagram ?
@xxrageprxx9806Күн бұрын
Did it hurt 😂😂😂😂
@jakecady31473 жыл бұрын
Wrong oil; not recommended for wet clutches. Use motorcycle oil, not car oil.
@danny-ck3xp10 жыл бұрын
Might want to change that oil again you put auto oil in your bike. oil in a motorcycle runs much hotter than the oil in an automobile engine also a motorcycle uses what is called a wet clutch auto oil will ruin your clutch.
@landinpetz9 жыл бұрын
This is so true. Really dude, not trying to troll you bc I do have some sort of a life (but still have time to comment on social media), but if your going to suggest/recommend a certain brand. Please make sure that your suggesting the kind of product that doesn't ruin your bike. That cost a few hundred to replace.
@normanhayashi7 жыл бұрын
danny cade The oil he's using is fine, as long as he doesn't use Energy Conserving oils that would cause his clutch to slip.
@theclinger5 жыл бұрын
@@landinpetz It cost a few hundred dollars to buy two more liters of oil? The weight he used is the OEM spec for the bike. As long as it doesn't have energy conserving modifiers it's fine. Most of the fuckers with oldgen bikes use diesel anyway.
@philipkaufman42944 жыл бұрын
auto oil cant handle the high rpms
@GotrekGurninsson4 жыл бұрын
@@philipkaufman4294 Tell that to my s2000 lol
@adamnathanson62283 жыл бұрын
It is NOT better to overfill oil. too much oil put in the engine, extra pressure can be put on these components, which can lead to leaks. ... Overflowing engine oil can also lead to bent engine rods and collapsed valve pipes. Spark plug fouling - Excess oil can find its way into spark plugs, which will then need to be replaced.
@AaronHuffmanPerson10 жыл бұрын
I... would rather have that done by, not me.
@seminolekilla11 жыл бұрын
Torque values man... torque values...
@Chivas610 жыл бұрын
That intro...kinda gruesome lol
@Ultrasoul3d7 жыл бұрын
Just how many EPA laws is he breaking in this video?
@charlies28064 жыл бұрын
It’s not a 17mm it’s an 11/16
@gerinmcguire7 жыл бұрын
Come on girls! Pick up your socks...change your oil...I just... >.
@sammorley73234 жыл бұрын
Why do you think I'm watching this video? 🤷♀️
@sleezymechanic4 жыл бұрын
If its 07 or older DO NOT PUT AN ORING ABOVE THE FILTER. Buy a damn service manual and follow specs...
@JasonChadActor8 жыл бұрын
LOL !! Hilarious. Poor Bike.
@lHASANl10 жыл бұрын
.....No Motorcycle Oil? You know there's a clutch pack in there.
@lHASANl10 жыл бұрын
NO No NO, Please for the love of GAWD never ever use FRAM anything! They are complete garbage!
@ckale58163 жыл бұрын
Well. I'm kind of curious why it matters that the bike was purchased from a female. I'm also curious why you did this video having NO IDEA what you're doing. The o ring goes on the bottom of oil filter bolt that goes into the housing. Also, you shouldn't use automotive motor oil in a motorcycle. There's detergents that will effect your bike.
@raidermatteo5 жыл бұрын
P.S.A. DO NOT DO ANYTHING THIS GUY DID!!! First off, NEVER guesstimate on how much oil to use. Second, the O-ring replacement was incorrectly placed, third, ALWAYS put your bike on stands for proper level readings, I can almost guarantee he did not drain all the old oil out. This video is wrong on so many levels.
@hsudexter401510 жыл бұрын
after this video I am very happy to spend $60 to ask somebody to do it
@landinpetz9 жыл бұрын
👍
@jesuscastro60384 жыл бұрын
Bro you should take this video down and redo it. You put the smaller o ring in the wrong location, it goes at bottom of the shaft after you take the shaft off the plate its on. I mistakenly watched this video and put my o ring in the wrong spot like a jack ass thanks to you bro...smh
@angelfernandez8663 жыл бұрын
Lol
@skaterdog9877899 жыл бұрын
What do you have against girl riders? 😤
@lmaolmoo41479 жыл бұрын
I'm pretty sure he was being satirical. But most (keyword) women don't care about cars/bikes and maintenance and just get them to look cool.
@thebluewolf24724 жыл бұрын
@@lmaolmoo4147 I love my bike, and I'm trying to learn how to maintain it without relying on other people in my life... its people like the dude in this video that make female riders feel left out. Most "bikers" i know are dudes and have no clue how to even change brake fluid on their stupid Harley's, at least i can figure that one out. My ninja is a 250r from '09... i got it four weeks ago and im still trying to learn the basics of maintaining it. My best friend (another woman) is the one helping me learn these things because unlike her I was never taught.
@LisaMeckler4 жыл бұрын
Not appreciating that "from a girl' comment. That being said there's no oil in my ninja right now. Wah.
@chris_topher1984 Жыл бұрын
how embarrassing man!! the little rubber seal DOES NOT go where you put it. LOL