All content creators please note: this here is how you make an instructional video.
@andy_w0ng9 ай бұрын
Thank you for the awesome compliment. I am very humbled and honored by your comment
@VinceCannavaII11 ай бұрын
Thanks for taking the time to show us the Wong way to get this done!
@andy_w0ng11 ай бұрын
LOL!!! Nothing Wong with your comment! Total cool 😂😂👍
@espinozanovak8319 ай бұрын
Excellent video and showing things a dealer/shop will never do, like correct torque, wiping things off, oil plug washer.
@fengollc376529 күн бұрын
Watching this even though I own an NC
@andy_w0ng29 күн бұрын
@@fengollc3765 thank you 🙏. NC are awesome too
@jimbrennan2956 Жыл бұрын
Everything you did was very properly done and that is why I am surprised that you purposely overfilled the oil capacity by 20%. Why would you deviate from factory specs? Since the motor most likely doesn't use oil, although overfilling may cause the start of oil consumption, it is running overfilled til next oil change. The term "max" means what it says.
@TheOctagonman9 ай бұрын
Thank you for this straight forward no nonsense video🙏
@jpsheldon2 ай бұрын
Excellent instructional video! Well done sir!
@andy_w0ng2 ай бұрын
Thank you.
@user-dr4wl3kk7i Жыл бұрын
I would change engine oil soon, in reference to your video, thanks!! nike work!
@stevem96038 ай бұрын
Excellent video!!! Very helpful. Thanks!
@andy_w0ng8 ай бұрын
thank you. and also thank you for watching and commenting on my video 👍
@maybeerainmaybeesnow11 ай бұрын
Great step by step video!
@andy_w0ng11 ай бұрын
thank you 😃
@nns353 Жыл бұрын
Can you make transmission/differential oil change video?
@mrspeeddemon7276 ай бұрын
Amazing video. Very thorough. The only thing you didn't show that I wish you had is where you put the rear jack stands. I assume there are two notches to put the jack stands between, back there also, along the pinch weld.
@andy_w0ng6 ай бұрын
Thank you for the feedback @mrspeeddemon727. Yeah, i realize that part after i uploaded and posted the video lol. But yes, you are correct. There are two notches that indicates where the pinch weld is to place the rear jack stands. On my next video when i do a wheel wash and detail, i'll show it lol.
@biglesent Жыл бұрын
Awesome video
@andy_w0ng Жыл бұрын
Thanks man 👍
@nns353 Жыл бұрын
Thank you it was very helpful. Can you provide a link to oil filter removal tool.
@andy_w0ng Жыл бұрын
hey sorry for the late reply. thank you for the like and comment. I got mine from Auto Zone. But here a 2 links that has them: amazon and advance autos has it Amazon: www.amazon.com/Lisle-63250-Range-Filter-Wrench/dp/B0002SR4PY/ref=asc_df_B0002SR4PY/?tag=hyprod-20&linkCode=df0&hvadid=312064691975&hvpos=&hvnetw=g&hvrand=7711846897546536498&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1026271&hvtargid=pla-440428293589&th=1 Advance Auto Parts: shop.advanceautoparts.com/p/lisle-import-car-oil-filter-wrench-63600/25981259-p
@whechi Жыл бұрын
What ramps are those? I like how low profile they are as like you did in you video, I just need them to get to the front subframe with my jack and not test my rock crawling capabilities in my Miata.
@andy_w0ng Жыл бұрын
Hey Will. Yes. They are low low profile ramps by: Discount Ramps Low Profile Plastic Car Service Ramps - 2 Pack I got them on amazon. At the time it was $42.99 for 2 Pack. Its every sturdy and durable. Doesn't slip or slide. The awesome thing about these ramps is that it has a divot at the front for tire stops to ensure that your vehicle is properly positioned on the ramp. ALSO, feature hollow honeycomb channels to prevent moisture from building up Here's the link if you're interested, here's the link: www.amazon.com/gp/product/B00UHLPES0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Yeah, these ramps will give you plenty of clearance for your jack to get underneath the subframe. DUDE! you take your Miata rock climbing??? That's AWESIME!!! lol Thank you for watching my video and comment.
@whechi Жыл бұрын
@@andy_w0ng no I have a land cruiser for rock crawling 😁 On that note I will not be putting my 6,000lb Land Cruiser on those $40 ramps lol perfect for the sub 2,400lb Miata
@jeff8ball Жыл бұрын
Nice job. Thank you!
@christophercornell40866 ай бұрын
Great instructional video! Andy, did you paint the lower aero pieces yourself or outsource? If yourself, how did you do it?
@andy_w0ng6 ай бұрын
thank you for the feedback and compliment @christophercornell4086! I had my local shop that does wraps to do it for me lol. Depending on where you live, I'm here in dallas texas and it cost me $150. A place called "Fortune Wraps". They also have a youtube channel www.youtube.com/@fortunewraps
@SuperMrObserver3 ай бұрын
Question: have you tried that, after you drive on the ramps, to raise the rear on the jacks first and then the front? You would need to raise it less (vs the front), as the front is already on the ramps.
@aoudjit789 ай бұрын
I do the same thing as you but I jack up both the front and back so no old oil can be stuck since the car is tilted backwards. I also use Mobile 1 but the regular synthetic not the hybrid model.
@Digi20 Жыл бұрын
Very good video, thanks :) what torque would you recommend for the skid plate screws? something like 12-15nm?
@andy_w0ng Жыл бұрын
hey Digi20. that is a great question and thank you for the like and comment. not many people wonder about that and sorry for the late response you can tighten these nine bolts in a few different ways. 1. air ratchet 2. battery operated ratchet (as seen used in this video) 3. manually. so, with that said, if you're planning to use method 1 & 2, make sure its a 3/8 ratchet. You won't need to worry about torque specifics. Those power tools will give enough torque to secure all 9 bolts. With power tools, you can zip by them so fast and possibly miss one or two. Thats why i go over each bolt to ensure they are ALL FASTENED and i did MISS ONE lol IF you're going to be using method #3, which will be a hand held ratchet, the torque specification will be 24 - 28 ft/lbs (or 32.5 Nm - 38Nm) IF you don't have a torque ratchet, you can apply roughly 10-15 degree turn rule (or 1/16th of a turn) after those bolts are fastened. That should apply close enough torque with that method. Same method i used for the oil drain plug @ frame 08:59. Hope that answers your question.
@stevederosa1655 Жыл бұрын
snug lol just kidding, as per mazda it says 24-28 ft lbs OR 32-38 NM for the lower shield bolts
@andy_w0ng Жыл бұрын
@@stevederosa1655 you say "potatoes" i say patatoes lol. Honestly, thank you for the great info. 👍
@gothops1547 ай бұрын
Dude those driving lamps are sweet I need a link for that!
@andy_w0ng7 ай бұрын
Sorry for the late reply lol. Here's the link to where i purchased it: www.carbonmiata.com/shop/mazda-mx-5/nd-15-mazda-mx-5-mazda-mx-5/exterior-parts-nd-15-mazda-mx-5-nd-15-mazda-mx-5-mazda-mx-5/grilles/spyder-grille-lights/
@pto1975 Жыл бұрын
Nice touch organge sticker. How do you do that pls and thanks
@andy_w0ng Жыл бұрын
i had a local vinyl wrap shop applied that onto my aero kit 😅. It was about $200. i'm not sure how much it would cost at your local vinyl shop. I wouldn't think it would be too much of a cost. after watching how it was applied, this could had been a manageable DIY for me but i don't have all the right tools. They had to take apart the front splitter, side aero kit and rear diffuser and thoroughly clean it before applying the wrap. It was more of a Red-ish Orange color. I hope this helps my friend 😅
@walthercasalini32048 ай бұрын
Peccato che ti stia in Texas, se tu fossi in Italia il tagliando lo farei fare a te. Complimenti strepitoso
@andy_w0ng8 ай бұрын
I had to use Google Translate lol. Thank you for the awesome compliment 😄
@jessehenderson98649 ай бұрын
How do you like that Spyder Foglight Grille? I’ve been thinking about getting one for my car but haven’t really seen any good videos or anything on them.
@andy_w0ng9 ай бұрын
DUDE! IT IS AMAZING!!! Me personally, ITS WORTH IT! If you don't mind the hassle of raisingg the front end and removing the entire front bumper to install it and running the wires and control switch into your Miata. I opted for the regular cool blue instead of the cool blue and yellow. I did film my process of removal and installation. But never got the chance to edit the videos to post it. Now that you asked, i'll do my best to have it edited and post it someday soon! There are two videos i would suggest to watch so you can get an idea what the level of installation is like. I would say it's MEDIUM. Nothing too hard. It took me 2 - 3 hours to complete. I was a automotive mechanic in the past for 15yrs and had all the tools to do the installation, so...with that said, this wasn't too bad for me. I would suggest to watch these two videos. One by @driveMX5 (drivemx5.com). His tutorial is just the regular grill w/o the fog lights. BUT VERY VERY HELPFUL in installation guide. He's also a Miata fanatic! Video 1: kzbin.info/www/bejne/mKbWpK1jnbilg6c the other one is by @carbonmiata2012 I think this is the company that made the grill with the fog lights. In there video, its more of like a timelapse of ther installation including running wire harness but not as in full detailed of how to remove and instal the grill. kzbin.info/www/bejne/hKm7YmSlbdiooLM Hope my response help and along with those two videos. Feel free to reach out for any questions. I would love to help and answer as best to my knowledge. Thank you for watching my video!!!
@alexzicong3 ай бұрын
Why did you remove the oil filter first instead of the plug?
@andy_w0ng3 ай бұрын
that's a GREAT question Alex. As a former car mechanic (and its just my preference). It is less messier to deal with if you replaced the oil filter first. 1. You don't have to worry about dropping the oil filter into a pan full of used oil and have to fish it out later 2. SPLASH prevention 3. don't have to move around a pan full of oil and causing spills/mess to clean up later. and LAST, you don't have oil dripping from the drain plug side while removing and installing new oil filter we all know, accidents happens. BELIEVE me. I made many of those in the past lol. hope that answers your question Alex and thank for the great question.
@tomb.41713 ай бұрын
@@andy_w0ng Very good tip and comprehensible reasons 👍
@gedan18 ай бұрын
Where did you buy your front grille and fog lights? Thank you
@andy_w0ng8 ай бұрын
you're welcome and thank you for watching and commenting on my video 👍 i bought it from Carbon Miata. Here's the link if you wanna check it out: www.carbonmiata.com/shop/mazda-mx-5/nd-15-mazda-mx-5-mazda-mx-5/exterior-parts-nd-15-mazda-mx-5-nd-15-mazda-mx-5-mazda-mx-5/grilles/spyder-grille-lights/ i opted to get the "Regular Halo Ring" instead of the "Dual Color Lights" Let me know if you have any questions i can help with
@Trigger-xw9gq4 ай бұрын
Pro tip: Fill the filter with new oil before installing, and use ATF to lube the ring, not engine oil.
@andy_w0ng4 ай бұрын
I’ve heard of that process before. Thank you for the pro tip 👍👍
@gburcaw Жыл бұрын
Just get taller ramps and you won’t need the jack and jack stands, and it’s a lot safer to be under the car.
@andy_w0ng Жыл бұрын
I agree and had initially thought about that but then, i don't feel comfortable with the ramps being next to me on both sides. All four of my jack stands have lock pins to prevent failure.. Thank you and greatly appreciate the suggestion-
@centripetal2511 ай бұрын
@@andy_w0ng What I do is use tall ramps, but still use wheel chock and jack stands as backup on the weld seem or the suspension arms.
@SergioLopez-qf2ye10 күн бұрын
Lo has hecho casi todo bien. Te has pasao echando aceite.
@chonghunyu8 ай бұрын
New washer ?
@richardhaas9519 Жыл бұрын
I think my '22 has a smaller access panel in the skid plate.
@gamma2348 Жыл бұрын
Great 👍
@stevegolacks8731Ай бұрын
People are going bananas over little overfill!! A 1/2 quart is 2 cups of oil. People are so scared to deviate from the manual, even when we are dealing with 2 cups of liquid. lol. Do you know how little 2 cups of liquid is? Its nothing. In no sane world would that little of an overfill hurt an engine. I bought a 2015 car in 2018, so it was a 3 year old car when I got it. When I first checked the oil, the dipstick measured like a good inch over the MAX line! When I did the first oil change, and put exactly what the manual said, the oil measured to the half way point on the hash marks. So in other words, I would say the oil was a full quart over! No biggie. Now when I do the oil change, I bring the oil line right to the MAX line, so its "overfilled" about a 1/4 of a quart. Someone was overfilling by a while quart for 3 years, 50k miles. The car runs perfect to this day. It didnt break anything.
@leonardovalanzano8922 Жыл бұрын
hi, what Mobil 1 did you use? can you send link? Thanks bro!
@andy_w0ng Жыл бұрын
if you own a ND Miata (2016 and up) it requires a 0W20. It also states it on the oil cap. with that said, I get mine from wal-mart which is the Moile One Advance Fuel Economy but I buy the oil filter from Mazda dealer. Often time, a new drain plug washer will be included. If not, its only an extra $2 or $3 dollars. Its always a great idea to replace those washers every oil change. Hope this helps. Please feel free to reach out for more questions. thanks for the comment and checking out my video.
@leonardovalanzano8922 Жыл бұрын
@@andy_w0ng thanks!
@jeanayrtonmichael974210 ай бұрын
Salut. Est-ce le moteur 2 litres ?
@andy_w0ng10 ай бұрын
Yes. It's a 2.0Litre 4Cyl 6 speed manual 😀
@JimmyPatrick-h1w Жыл бұрын
Why would you intentionally overfill the oil by a half quart???? Overall, video was great,absent the overfill
@andy_w0ng Жыл бұрын
With oil filter replacement its 4.3 L (4.5 US qts) Since I buy the 5 quart container, that left over .5 won't hurt the engine.. Hope that makes sense to you and i do appreciate the questions and feed back 👍
@adamsteele61482 ай бұрын
@@andy_w0ngDon't over fill the engine that's just stupid and a quick way to blow seals
@stevegolacks8731Ай бұрын
@@adamsteele6148 , a 1/2 quart is 2 cups of oil. People are so scared to deviate from the manual, even when we are delaing with 2 cups of liquid. lol. Do you know how little 2 cups of liquid is? Its nothing. In no world would that little of an overfill hurt an engine.
@adamsteele6148Ай бұрын
@@stevegolacks8731 go by the dip stick. If it's over the fill line you put too much in.
@stevegolacks8731Ай бұрын
@@adamsteele6148 , Ive had no issues for 50 years so far. Not one. I dont purposely overfill, but I dont measure either when I have added oil to some old beater cars I used to have. So there had to have been some times I overfilled. No biggie. I even had a 2004 Toyota Corolla back in the day, and after the car was 5 years old, they issued a recall of some sort where a new dipstick was installed. Toyota said the new dipstick is to measure the new oil amount they want you to put in, which was an extra half quart. Engines have more capacity that what the manual says, and that recall proved it. My current daily driver calls for 4.25 quarts, but 4.6 brings the oil right to the MAX line, so thats what I put in. I hate when certain car brands have their oil amount spec bring the line only half way on the hash mark! Thats makes it confusing and harder to monitor if the engine is burning some oil .
@Fall508River Жыл бұрын
It says on google 4 quart????
@andy_w0ng Жыл бұрын
With oil filter replacement its 4.3 L (4.5 US qts) Since I buy the 5 quart container, that left over .5 won't hurt the engine. Hope that makes sense lol