How to Change Sennheiser HD 4.50BTNC Ear-Pads

How to EASY remove, change or replace ear pads cushions for Sennheiser HD 4.50BTNC bluetooth headphones. Existing ear pads are completely dead. Before you remove the old ear pads cushion, buy new Sennheiser replacement ear pads. To remove the ear pads, you need to pull the ear pads off the headphones housing with your index and thumb fingers. The edge of the ear pad is held inside the groove of the headphone housing. It is very easy to take them off, but be warned, that it is much harder to put them back on. Remove is so easy, here's the speaker itself. When you put the new ear pads on, make sure the seam is down, then stretch the edge of the ear pad cushion, this will make it easier to put on the headphones. I usually start by putting the ear pads on from the top, get the top edge of the ear pads inside the groove, then use the fingers of one hand to hold the edge in the groove, so it doesn't fall out. Meanwhile, with the fingers of your other hand, pull the remaining part inside the groove. And so on, until the whole edge of the ear pad is inserted. At the end, you can rotate the ear pad a little, so that the edge fits better into the groove. This is how the new ear pad looks, now all you need to do is to put the second ear pad on in the same way. It takes more patience the first time, but it's worth it, for a few dollars you can make your headphones like new.
Sennheiser HD 4.50 ear pads on Aliexpress:
- bit.ly/3Fvf04s
Sennheiser HD 4.50 ear pads on Amazon:
- US amzn.to/3IKXJ87
- UK amzn.to/3DMXBCM
- DE amzn.to/3SJAptC
✅ Checked out our sub-channels:
- Techscrew / techscrews
- Techscrew Home / techscrewhome
🇷🇺 Hазвание видео: Как заменить амбушюр для Sennheiser HD 4.50BTNC Беспроводные наушники
🇩🇪 Video Titel: Auswechseln der Ohrpolster für den drahtlosen Kopfhörer Sennheiser HD 4.50BTNC SOCIAL
✔️ / techlv
✔️ / techscrews .
DISCLAIMER: This video description and comment section contains affiliate links, which means that if you click on one of the product links and later buy the product, I’ll receive a small commission. This NEVER affects the price you pay, and it’s an easy way to support the channel and the work that I do. This helps support the channel and allows me to continue to make videos like this.
Thank you for the support!

[@TechscrewDIY]

Sennheiser HD 4.50 ear pads on Aliexpress: - bit.ly/3Fvf04s Sennheiser HD 4.50 ear pads on Amazon: - US amzn.to/3IKXJ87 - UK amzn.to/3DMXBCM - DE amzn.to/3SJAptC

[@xVISTALUx]

The Stretching at the beginning is a Game changer. Tkank you!!!!

[@TechscrewDIY]

true :)

[@ValentinDehez]

Thank you for your technique !!! The stretch at the start changes everything!

[@slevinlaine]

Thank you so much for the simplicity yet efficiency of the video!

[@b00gi3]

Thanks for this, helped me. While holding the parts you've already done with one hand, Think about ROLLING the edge "over and back in" to the groove, millimetre by millimetre. It has to be done very gradually. Don't try to do a long stretch in one go. A little patience is required. That worked for me. Your tip for seam goes to the bottom was good.

[@TechscrewDIY]

Great tip!

[@stoicunicorn7914]

Directed here from a helpful Amazon review. Great tips. Took me less than 10min to patiently put both new pads on. Thank you helpful Internet strangers.

[@TechscrewDIY]

thanks for feedback.

[@jasonquilliam8530]

Thank you - I have just changed the ear pads on my Sennheiser HD 4.50BTNC headphones after following your excellent instructions. Before seeing this I thought that I would have to buy new headphones. But now for the small cost of the replacement headphone ear pads, the heardphones are like new again. Which not only saves money, but is better for the environment. 🙂

[@TechscrewDIY]

exactly, thank you for feedback.

[@jannispohl1441]

I just wanted to slam my headphones against the wall out of rage until i watched this video and felt like a fucking toddler. Instantly worked

[@thesuntitan]

Holding them the right way makes all the difference, thank you.

[@paulfrc9501]

Thanks a lot for the stretch !!

[@LVscreamed]

I was trying to do this for like an hour before i found your simple tip to stretch it before. Thanks!

[@TechscrewDIY]

thanks for feedback :)

[@Luminous0606]

I was partially lost when the pads get too stiff and I cant cover the entire ear but when I watched your tutorial and stretched it out a little bit, I could finally get in done. Much appreciated mate !

[@Shortdood]

thank you so much made it way easier

[@timonkolb3562]

Thank you so much i am using it now the second time it is very helpfull i love it. Were i tried it without help I was about to throw them against a wall.

[@notmillionaires]

Thank you! Lol. I was going insane with the little tool. Amazes me I still forget we have KZbin. 😊 Vudeo is greatly appreciated.

[@MrGuerillaVideo]

Thanks for the tip with stretching that shit… helped a lot 😊

[@wilisjaafar1592]

The stretch helps. Most importantly, start from the top.

[@DmitryGalyuk]

Thank you!

[@alanr.b.4486]

It helps a lot. Thank you !

[@TechscrewDIY]

Glad it helped!

[@theduwy315]

Thank you so much !!

[@bidyutchakraborty2433]

Thank you. A little stretching before trying to put the ear pads in place worked really fine. Did it with a little try.

[@Syse]

This was quite easy after following the video exactly as shown. Make sure to follow his technique by pulling earpad from INSIDE to pull OVER and INTO the groove.

[@TechscrewDIY]

thanks for feedback :)

[@jdh3777]

THANK YOU!!!

[@ritxigoya]

Thanks

[@grass_hopper]

Thanks.

[@arnaudgiral7394]

Excellent merci !!!! ;)

[@tarunyadav6617]

thanks bro

[@alisonsouthey3952]

Thank you so much for this video!! I was struggling until I found this! 🙏

[@SaPradilla]

Ty men

[@danbenatan2377]

Here' are two tips from my experience: 1. Once you have one part of the edge in the groove, use a guitar pick to wedge it in place so it doesn't slip out as you work your way around. 2. Use a thin tool with a blunt tip (I used a very small crosshead screwdriver) to slide under the rest of the edge and pull it around the edge of the speaker. It's then easy to push it up to the groove where it will drop into place.

[@TechscrewDIY]

thanks for feedback :)

[@5ONLINEPERCUSSION]

Thank you for this video instruction !! Finished in 2 minutes ;o)

[@tapok1991]

Спасибо!!!!!!!😊

[@t.paquet264]

Thank you , how do you change the battery. They dont hold à charge anymore

[@TechscrewDIY]

open housing and replace it :)

[@blifi77]

1 important advise for everyone doing this: STRETCH that thing enough. I tried it with just a little stretching in the beginning and started hating this world. After stretching the rubber a little more, it fit very easily and still tight enough to not come off again! Also, if you got bigger fingers, consider using a toothpick or something similar to fit the rubber.

[@TechscrewDIY]

Tnaks for tips and tricks.

[@Skyscraper295]

Do you think that we can use 450bt pads for 350bt model? I can not find the ones for 350 bt in my country, and all I can find is ones for 450bt

[@TechscrewDIY]

I don't know, need compare size

[@parilyx]

yeah theyre about the same size

[@PZAPCR]

Good

[@TechscrewDIY]

simply way how to get back headphones :)

[@CHIEFHOPPER]

How do I do quantum physics?

[@owentheman1]

We’re all in this struggle together, everyone

[@dontknow3949]

Like genuinely I’ve never had so much intense hatred for an engineer than I have here. It feels fake that someone would make this a reality and sell them to tons of people knowing damn well this would happen and the absolute hell that would ensue. It feels fake. It feels unreal and surreal. It feels almost evil?

[@Monke15329]

Fr like let me see this nigga in public bro shit gon get wicked

[@pptemplar5840]

I have only changed earphone pads once before, but isn't this normal? Like sure it's a LITTLE tricky, but it doesn't appear like they stitched them onto anything or glued them down. Maybe it's just Apple and HP making me lose faith in all of humanity but pulling off earpads and replacing them seems like a perfectly reasonable 10 minutes job.

[@user-hm3tf7up1c]

What a waste of time listening this computer generated nonsense, stating the bleeding obvious. If you can't figure out how to fit these ear cups, I'm surprised you can operate a device capable of showing KZbin.

[@jamesjennings-yd2bc]

Just wish the voiceover was real and not generated.

[@YesIDoCrushOnOlderWomen]

Still impossible

[@BoomArenaLover92]

Fucking fr. Had to beat my son I was so frustrated

[@alexanderg.5426]

​@@BoomArenaLover92lmaooo relatable

[@krollpeter]

warm it with a hair dryer

[@mario3380]

Thanks