How to Change Spark Plugs in a Honda Accord with 2.4 L Earth Dreams | 2013 - 2017

This is video will briefly show you how I easily changed the spark plugs in a 2013 - 2017 Honda Accord 2.4 L with the Earth Dreams Technology Engine. SPARK PLUG PART NUMBERS LISTED BELOW.
All you will need is a few tools and a little ambition. The total time from start to finish took me no longer that 30 minutes including gapping the spark plugs.
Note: Gapping the spark plugs isn't strictly necessary because they usually come pre-gapped but I do it anyway. The plugs I received were out by 0.1-0.2 mm, minimal.
Parts Used: (Affiliate Links)
NGK Spark Plugs: amzn.to/2Mw6zsc
Denso Spark Plugs: amzn.to/2FYOlxU
Please feel free to like, subscribe and share!
Thanks for watching!
Disclaimer: I am not responsible for any damages that may occur due to improper operation. This video is strictly documentative and should not be used for anything other than reference. Do so at your own risk.
Music: Daily Beetle by Kevin MacLeod
#HondaAccord #sparkplugs #diy
Licensed under a Creative Commons Attribution license (creativecommon...)
incompetech.com/

[@19anthro11]

Great video! To the point and no long drawn out talking!

[@littlebr4d]

Nice job. I like the use of the rubber hose to take the place of a 9/16" spark plug socket. I went ahead and bought one for a few bucks since all I had was 5/8" and something else I can't recall at the moment, but this is a great workaround as long as the existing plugs come out without much fuss.

[@IamCalvinKing_]

Great video tutorial and thank you.

[@andrewl8251]

It would be great to have links through which we can go to affiliate sites to purchase the parts mentioned. Would add some extra money in your pocket too for this excellent work. Thank you

[@ShopEightyFive]

Great Idea! Thanks!

[@laviebanale]

Great video. I just started fixing my car. I have few q’s for you. What’s the socket extension size? 3/8, 5/8? And what kind of torque wrench should I get?

[@ShopEightyFive]

Thanks! I used a 3/8” socket extension and a 3/8” torque wrench that has a range from 5-80 lb/ft. You can pick one up online or most auto parts stores for around $30. If I remember correctly I bought mine on amazon. They have everything! Good luck!

[@imthateddie]

Thanks for the video! Ready to change plugs this weekend.

[@ShopEightyFive]

Nice! Let me know how it goes!

[@kenbessemer4913]

Best vids ive seen 99 out of 100 - you forgot to show the antis seaz and boot grease.. but all your vids are top notch

[@ShopEightyFive]

Thanks! Depending on which plugs are used anti-seize isn’t necessary. I went with NGK plugs which don’t require it. However if you do decide to use it, make sure to decrease the torque spec.

[@BA-gn3qb]

Anti seize will effect the torque specs. NGK does not need and does not recommend it.

[@jamiemcgill67]

Excellent video. Make changing plugs super easy! THANKS!

[@saifk1425]

Great Job, nice video.

[@FarrisTX]

Great video

[@Hakuna_My_Tatas]

You could have also used the coil pack to pull/put in the plugs. Don’t they already come pre gapped from the factory?

[@ShopEightyFive]

They “should,” but aren’t always spot on.

[@Hakuna_My_Tatas]

Adam Williams true. Any oil consumption issues with your accord?

[@ShopEightyFive]

Nothing noticeable yet. I’m only at 65k though, so I imagine it’ll start consuming around 100k or so.

[@Hakuna_My_Tatas]

Adam Williams, i see. Yeah ive read on the accord forums a few of them have experienced high oil consumption and some have even pulled out their dipstick and there was no oil lol. Maybe do a video on a longterm review pros cons on the accord? 👍

[@jobber1984]

Adam, we just got a 2015 cRV with the same engine. There is alot of talk around carbon build up on direct injected motors. Have you had to address this in your accord now that it's a few years old? Keep up the great videos pal!

[@ShopEightyFive]

Mike, No I haven’t noticed anything abnormal. I’ll keep a closer eye out now that you mentioned something. Thanks!

[@jobber1984]

@@ShopEightyFive awesome! Ya I haven't found anything relating to carbon buildup on these motors. Maybe it's not a huge issue. Cheers man keep up the awesome videos!

[@kenbessemer4913]

@@jobber1984 I have heard this problem on these types of direct injection engines but not about Honda directly (the crossfires with these would bang valves) my 2014 accord was tickky when i first got just it _I use mobil 1 gas and a few injector cleaners additives and the clicky went away - remember this direct injection also causes oil dilution from the gas coming in at 40k psi via ring blow by and change your oil twice as much!

[@jobber1984]

Ken Bessemer thanks ken! I just changed the oil last weekend and noticed it smelled like gas! The dilution is now on my radar! Appreciate the reply my friend, cheers

[@bdubbin16]

Thanks for the video! Could you make one on how to install an oil catch can on a 2013-2017 Honda Accord 2.4L, please?

[@ShopEightyFive]

I don’t have any plans for one but if I do I’ll definitely let you know!

[@waboom248]

Dirwctly behind the oil fill cap about 8 inches towards the firewall is a 3/8 hose that goes from the PCV valve to the intake manifold. Put your catch can inline with that hose. The bracket that the fuel supply line is just above this area. You can use that bracket to mount the catch can to. That's what I did.

[@jesusr9298]

Adams Williams... How many miles you need to change the spark plugs accord 2.4l/cada cuantas millas tienes que cambiar las bugias en el accord 2.4l?...beside that it was great job!!!muy buen trabajo!!!!

[@ShopEightyFive]

Check every ~30,000 miles, change ~100,000 miles.

[@RUKlMakino]

Great job and easy diy video! One question do you need to disconnect the battery before first?

[@ShopEightyFive]

Thanks! No, you shouldn’t need to disconnect the battery, but you always can if it makes you feel more comfortable.

[@bigsecret51]

Looks good to me

[@jessevasquez8762]

Just wondering which spark plug brand is better NGK or Denso?

[@ShopEightyFive]

They both are reputable but my preference is NGK.

[@DkpProductions]

I put rubidium new higher ignitibility in. 10k later going strong

[@SpecRB]

Don’t gap if they have iridium tips

[@lmbear]

Exactly. Something that should really be said, but is not said in this video. Also, a magnetic spark plug socket is the ticket for removing and installing the plugs. This is a simple job that just about anyone can do, but again don't mess with the gap on an iridium plug. If it is gapped right, take it back and get one that is. The reason for that is the iridium electrode can be damaged by incorrectly adjusting the gap on the plug.

[@Dope6oyzInc]

For some reason, Oreily's, Advanced Auto Parts, and Autozone are saying the recommended spark plugs DILKAR7G11GS (NGK) and DXE22HQR-D11S (Denso) ha e been discontinued... i don't know what part to use now...

[@beka5957]

my 2014 sport accord has a little tremor when its in D position and its stoped(break pedal) . today I have changed upper and lower cvt mounts. there is a little bit tremor yet. I think I have to change also the engine mounts upper and lower just in any case. have you had the situation like this ?

[@bigabescanal2799]

Thats normal for these cars.

[@jmc224]

Anybody else have issues with one of the 10mm sockets on the earth dreams cover not coming out?

[@cloudforest4087]

Thanks.

[@teslamr7333]

Roughly how many miles should this be done?

[@BA-gn3qb]

Honda actually recommends this at 105,000 miles using iridium plugs. I will be changing the original plugs at 103,000 miles. And try out the new NGK Ruthenium plugs.

[@Cu_Ty_Pro]

my car is at 129k now, its 2013. I believe I had spark plugs changed at the dealer at 100,000 miles while doing other services. however, I'm feeling like they didnt change them at all. is there anyway I can check if my spark plugs have never been replaced ?? my car has been getting really bad gas mileage. I usually average about 33..35 per tank. now its stable at 29, same driving habits, same commute distance...

[@ShopEightyFive]

Dat Huynh It’s difficult to tell 100% whether or not they were changed. Either way, Honda recommends changing the spark plugs every 30k so you might as well replace them since you’re due. This way you’ll know when it was done and will know to do them again at 60k.

[@BA-gn3qb]

@@ShopEightyFive - Actually, Honda's recommendation is 105,000 miles using iridium plugs. These come pregapped, and the gap tool you used will scrape off the iridium tip making them fail.

[@MrKikicat5]

What is spark plug brand?

[@vuhuynh702]

modern spark plug on this Honda 2013 to 2017 can last up to 150k miles. maybe you just replace a little early with 25k miles ;)

[@ManniX4Prez]

Good yo know. Just bought a 2013 with 134k. So much that i need to do and this will be my first time being handy with a car so I’m excited. Vids like this makes me feel more confident

[@MrKikicat5]

Why didn't you tell us disconnected negative battery 🔋?

[@mathforuss]

Thank you

[@ShopEightyFive]

Welcome!

[@beka5957]

could you tell my do I have to change the filter and dreiner with the oil HCF-2 ? (cvt transmission oil change)??? 116700 miles

[@AntonAtan]

Did you change trans filter or just the oil ?

[@juliol8311]

How many miles have to be changed?

[@ShopEightyFive]

Check every ~30,000 miles. Replace every ~100,000 miles or as necessary.

[@juliol8311]

Thanks for the info n great 👍 video

[@bigabescanal2799]

@@ShopEightyFive does it say every 30k in the owners manual? I thought these spark plugs can last up to 100k? I have 50k on mine and its running great.

[@ShopEightyFive]

It mentions checking every 30k and replacing around 100k. Thanks for having me double check.

[@bigabescanal2799]

@@ShopEightyFive respect that quick reply.

[@Nodirm93]

I think I have to change mine, i have about 78k miles on it. When i push the gas pedal really hard it feel like im on ECO mode and engine sound is like its struggling, not smooth sound like before. And once I was parked my RPM dropped while idling.

[@ShopEightyFive]

It can't hurt. Especially if it's the original spark plugs.

[@anthonychappell4746]

Hey. Where did you get the 7/16 hose from?

[@ShopEightyFive]

Anthony Chappell I got mine from a local hardware store that sold it by the foot.

[@anthonychappell4746]

Adam Williams thanks!

[@anthonychappell4746]

Did you use a specific “spark plug socket” for this, or will a normal “deep” socket without the rubber insert work to loosen the without damaging it?

[@ShopEightyFive]

I used a spark plug socket but you could get away without one for removal. The benefit of having the retaining rubber is it holds the spark plug in place which makes removal easier but more importantly you won't drop the spark plug when reinstalling. Take extra care when tightening the spark plug as well as you will run a higher risk of cross threading. I typically hand tighten first and then tighten and torque the rest of the way with a wrench.

[@anthonychappell4746]

Adam Williams ok thanks. When reinstalling the plug I plan on using your nifty 7/16 hose technique.

[@dinosierra6866]

what is the torque spec for the park plugs ?

[@ShopEightyFive]

3:30 shows the spec I used for the type of plugs and engine I have. Yours may differ so make sure you look up the proper torque specifications for you engine.

[@dinosierra6866]

mines a 2013 accord ex-l 2.4 i tried to replace the spark plugs but saw i didnt have an extension im confussed on the specific torque spec since its my first time attempting it it sais 10.8-14.5 ft lbs what do you recommend i set it to?

[@ShopEightyFive]

You should be fine at 14.5 lb-ft.

[@waboom248]

NGK says 13 lb/ft of torque.

[@bombidude]

Gotta love the music.. nice video

[@MDHASAN-xn5kj]

vest video

[@miguelballon5614]

Thanks for the high 5 🥲