I didn't get or like asmr until this video. This is my exception.
@epicpizzamastr46866 жыл бұрын
This is basically my racket with the colors revesed. Love It!
@danielkorn17535 жыл бұрын
That was the best rubber gluing I have watched it was great!
@shingoukiex5 жыл бұрын
Daniel Korn thanks. I’m glad you like it and hopefully it can be of help.
@nuzea Жыл бұрын
man that cutting is clean, love how the smoothness ended up
@AGK8433 жыл бұрын
Very interesting! I will have to try this myself. Been using the same rubber for 5 years (on & off) and it's smooth as a baby's butt 👶🏽 (newbie here). I like chopping on both FH & BH Thanks for the upload!
@shingoukiex3 жыл бұрын
You’re welcome thanks for your comment.
@goodboys89205 жыл бұрын
I don’t even own a ping pong paddle and I’m watching this
@BrunoNeureiter7 ай бұрын
It's a sign
@zvejukanalas77354 жыл бұрын
Those rubbers you changed , they looked like new :D How often you change them ?
@shingoukiex4 жыл бұрын
About once a year or two.
@wavessa6 ай бұрын
What do you dip the sponge in before you start to lubricate the rubber?
@luizcarvalho42458 жыл бұрын
05 and 64, best combination ever!!
@shingoukiex8 жыл бұрын
Luiz Carvalho I think so too!
@epicpizzamastr46866 жыл бұрын
Agreed! I use these two on a boll forte blade, and love it!
@ansenchan30556 жыл бұрын
Actually h3 and t80 is better
@ansenchan30556 жыл бұрын
Also becuz of Viscaria
@RogerThat19455 жыл бұрын
Make sure it is warm? Cold glues are HARDER to tear apart...? And Thank you... still looking to buy such a racket/bat for my boy.
@xinli97005 жыл бұрын
Well myself i use the bat/racket he’s using which i think should be VISCARIA and could cost up to 200$
@afriliansaefulfajri95815 жыл бұрын
Expensive set up, i just can imagine to have it..
@lpstd135 жыл бұрын
Hi and thanks a lot from France. Did You put some surfazer before or glue directly?
@shingoukiex5 жыл бұрын
Philippe Masia Hi. I just glued directly I wish I had something to put on before gluing.
@user-xf3gs8lm8w5 жыл бұрын
Almost every time I change my rubber the sponge rips or tears 😭 is there any way to avoid damage when taking of the rubber so I can reuse it?
@shingoukiex5 жыл бұрын
K yes. The most important thing is to do it at a medium speed. Not too fast and not too slow. It also depends on the brand of the rubber. Some sponges are harder or softer than others, causing it more likely to tear.
@user-xf3gs8lm8w5 жыл бұрын
shingoukiex thanks! Also, is there anything different about glueing and removing long pips?
@stephdechatillon65915 жыл бұрын
acétone
@wizardmaster66392 жыл бұрын
Are you showing your desk or the paddle?
@19stacymoore Жыл бұрын
What kind of microphone does this guy have that you can hear an exact o knife cut rubber?
@shingoukiex Жыл бұрын
lol
@slayxpredator_gaming75723 жыл бұрын
So satisfying sound
@themaestromusician5 жыл бұрын
Hello Shingou.. could you tell me few brand names for anti spin, small pimples and normal rubbers please?
@shingoukiex5 жыл бұрын
themaestromusician Sorry. I’m not too familiar with these types of rubbers.
@AlexLiquidModernity7 жыл бұрын
Is it advisable making two separate glue surface treatment? That is, waiting the first treatment dry then make a second one. I read someone doing this thing with porous rubbers like tibhar evolution or tenergy. The first glue treatment makes the glue penetrate pores, the second creates the surface layer. Is it recommended?
@shingoukiex7 жыл бұрын
Alex Skyer I used to do that when using speed glue, sometimes even doing 3 layers. I'm not too sure if more layers of water based glue affects the performance of high tension rubbers nowadays. Speed glue was made for older rubbers without tensor technology, however, since the ban of speed glue and the introduction of tensor rubbers, personally I think there's not need to apply multiple layers of glue anymore, as that's what tensor technology does.
@AlexLiquidModernity7 жыл бұрын
I get it. Thank you so much for your timely answer!
@shingoukiex7 жыл бұрын
Alex Skyer you are quite welcome
@lgeiger7 жыл бұрын
I glued a Donic Bluefire M1 for a friend and I had to use two layers on the rubber, because the sponge was too porous. The first layer was almost completely absorbed by the sponge.
@abrahamgenarofloresacevedo7437 жыл бұрын
La verdad muy hermoso que buena tecnica.
@ognjenjokicic76685 жыл бұрын
what glue should I use?
@maksf31025 жыл бұрын
Ognjen Jokicic any water based
@miziesanas4 жыл бұрын
@@maksf3102 what on earth name is that
@ahmadamirulafif70442 жыл бұрын
Can i know... what kind of sponge you used for apply glue to blade and rubber
@shingoukiex2 жыл бұрын
I think the butterfly sponge, or Nittaku.
@HassanAli-yx4ts3 жыл бұрын
Perfectly done and satisfying to watch! I wanna know what kind of glue you applied to the blade and rubbers.
@shingoukiex3 жыл бұрын
I used a Nittaku fine zip.
@bingsu_au5 жыл бұрын
ASMR right there, but thanks, it helped.
@rifkyall23607 жыл бұрын
I'm new to table tennis, how often should I change the rubber?
@shingoukiex7 жыл бұрын
Hi. It depends on how much you play. If you play daily and take good care of it I'd way 1 year period is good.
@DariusSarrafi6 жыл бұрын
Excellent video! Can you provide the exact name of the glue applicator (cylindrical sponge) you bought on Amazon? Thx!
@shingoukiex6 жыл бұрын
dsarrafi Hi. The applicator is called Butterfly clip sponge. It comes with a plastic clip and about 10 cylindrical sponges.
@DariusSarrafi6 жыл бұрын
*shingoukiex* Thank you so much!
@walterbijeli59906 жыл бұрын
Hi, is there a reason you use black rubber T05 for forehand because I see a lot of paddles with red T05 for forehand glued to the side of the paddle where is description of paddle, name model serial etc... Probably it doesn't matter which side of paddle is used for FH and BH.
@shingoukiex6 жыл бұрын
Walter Bijeli Hi. It doesn’t matter which color you glue for forehand or backhand. It’s personal preference.
@schneiderss8256 жыл бұрын
Nice stuff man. But i noticed one thing. Blade made the sponge bleed a little from the edges. I face the same problem. Is there any blade out there that goes through rubber n sponge like knife through butter?
@shingoukiex6 жыл бұрын
schneiderss thank you for your comment. Actually I intentionally made it like that so if I do hit it against the table it won’t damage the blade but instead the rubber.
I need your help here, I bought a very common and recommended blade(Yinhe N9s) with (Mercury 2 Medium) rubber. when I played with it the four hand is very powerful and has a very good control, but the backhand is very bad, I could do anything basically, the ball just fly a way if I receive any spin . is the problem from the blade or from the rubber. thank you so much.
@shingoukiex5 жыл бұрын
Comacho Comacho unless the blade is really poor quality then it’s the problem of the rubber. Blades are made with uniformity on either sides, but it is rare to have the same rubber on both sides.
@mariadalee32775 жыл бұрын
How soon can you play, after replacing rubber?
@shingoukiex5 жыл бұрын
Maria Dalee I can play right away if you want, but I usually put it under some heavy books for 1 night.
@arindammishra85443 жыл бұрын
I need a help? Which rubber is better for me I am an attacker and I need more power than spin..... Tell in tenergy series as I am currently using 64 and 80.....
@shingoukiex3 жыл бұрын
80 is fine. It’s a good balance of speed and spin. Alternatively you can use 64 on your forehand as well.
@mladenmomcilovicnbg7 жыл бұрын
great video, thanks! for how long you use your blades before a need to replace them?
@shingoukiex7 жыл бұрын
Mladen Momcilovic I use them for about a year before switching. After a year the rubber surface starts to fail to grip the ball well.
@martinwilliams4987 жыл бұрын
Hello, I have an issue where the red rubber is coming away from the yellow sponge. would taking the red up and applying glue to the yellow work? or would I need to buy a whole new red rubber and yellow sponge? any help would be much appreciated
@shingoukiex7 жыл бұрын
I think you have to buy a new one. Once the sponge separates from the rubber, then it's hard to fix.
@solaGG.2 жыл бұрын
Do the butterfly packets come with 1 rubber for 1 side or 2 ?
@shingoukiex2 жыл бұрын
Just one
@solaGG.2 жыл бұрын
@@shingoukiex thank you,
@賴明德-f9k7 жыл бұрын
請問蝴蝶05跟蝴蝶80分別功能及強度為何?都反面嗎?聽過史迪卡(李曉霞拿的)的球板是?
@shingoukiex7 жыл бұрын
賴明德 Stiga 145
@victory39188 жыл бұрын
Thanks for your informative video. Would you use a sealant on a new blade prior to gluing on new rubbers?
@shingoukiex6 жыл бұрын
Victor Y yes I would. It helps protect the blade!
@florincarata5215 жыл бұрын
@@shingoukiex Is there any sealant you would recommend? Also, why do you cut two times, don't you get different angles for the cut of the sponge/rubber?
@shingoukiex5 жыл бұрын
Florin Carata I have yet to use it myself. Actually I would like a good recommendation from someone as well. Cutting it twice ensures that the rubber or sponge won’t be damaged. The first cut cuts through the sponge only, and the second cut is through the rubber.
@florincarata5215 жыл бұрын
shingoukiex I have the same setup but the scalpel’s blade is smaller and it cuts very easily . One pass without much pressure and it’s done. I am satisfied with the result, but next time I will be looking at other blades.
@shingoukiex5 жыл бұрын
Florin Carata yea, the blade I’m using is just a surgical knife. It can cut in 1 go but I just want to make sure nothing breaks or rips.
@uzare5 жыл бұрын
I just bought a dunlop revolution 7000 racket, im not a pro just amatuer. Do you reckon its good racket
@shingoukiex5 жыл бұрын
I’ve never used it but depending on the combination of the wood it can be a good racket.
@teamparekoy43168 жыл бұрын
hello Sir i would like to ask if your old rubber still can be use in my racket blade?
@shingoukiex8 жыл бұрын
RODOLFO MERO probably. I keep my old rubbers and sometimes put them on other blades I have.
@ondrejpalenik39806 жыл бұрын
Hi...can i ask ? is that old rubbers usable when i pull them off ? can i bond it on other blade ?
@shingoukiex6 жыл бұрын
Ondrej Páleník yes you can. However due to contact to the glue it might have shrunken in size.
@ondrejpalenik39806 жыл бұрын
@@shingoukiex ok, thank you so much 😊
@ayn11473 жыл бұрын
Thanks
@kewalkataria14254 жыл бұрын
I am from India can you tell me which glue I should use to stick my rubber
@ViaticalTree8 ай бұрын
Elmer’s
@prajwolprajapati8307 жыл бұрын
where can i find that glue and that small broom
@shingoukiex7 жыл бұрын
Prajwol Prajapati I bought the glue on Amazon. The brush is a clip with a cylindrical sponge. Amazon also sells them.
@janagan32844 жыл бұрын
What are the things needed ???
@shingoukiex4 жыл бұрын
Sowmiya Ganesh Sowmiya watch my other videos there are captions
@wifflz55518 жыл бұрын
this is my new set up, can you tell me if teesports is a good place to but tt equipment
@blythbrown-swankie55814 жыл бұрын
Wreckz Gaming very good place
@ArcticMonkey337 жыл бұрын
is the T05 on your Backhand?
@shingoukiex7 жыл бұрын
_ RulesTV no, T05 has a slightly harder rubber so it's more suited for the forehand. T64 is for the backhand, it has more control on passive plays like backhand blocks or punch shots.
@dvamateur5 жыл бұрын
Nice and neat job. I'd think that hot hair drier would be good after the adhesion has been done, but then you can't heat the rubber side, it would damage it... So what do I know...
@nihlify2 жыл бұрын
Not really. You let the adhesive go transparent before putting it together and it sticks very quickly, the drier is just to speed up that process. You can just leave it until it goes transparent
@benson16088 жыл бұрын
Where can I get that knife? It seems very solid and sharp.
@shingoukiex8 жыл бұрын
Ben Fritz its a surgical knife.
@benson16088 жыл бұрын
shingoukiex There are knives like that for art.
@くろいぬ-g1k8 жыл бұрын
jtrttnmvtvvn
@imranseyyad50068 жыл бұрын
how many layers did u put on the rubber and blade
@shingoukiex8 жыл бұрын
As you can see in the video just one on both the rubber and the blade. There isn't much point in using multiple layers of water based glue. Only use multiple layers for speed glue.
@ebonyivory1494 жыл бұрын
But is it a simple phon for hair?
@jom23297 жыл бұрын
what's glue? and how long time you put old rubber on blade it's looks like so stick with blade?
@shingoukiex7 жыл бұрын
jomtack kreanga glue used is nittaku finezip. I used the rubber for one year.
@jom23297 жыл бұрын
+shingoukiex yeah thanks I'm deciding free chack, nittaku fine zip, Andro turbo fix. I want so hard stick glue.
@ahamedmaluk14935 жыл бұрын
The hair dryer step aint necessary eyt
@fajara61247 жыл бұрын
What are you doing with the brush on the tissue (4:40)? Btw, nice video...
@shingoukiex7 жыл бұрын
Fjr afi To make the sponge a little bit wet. It makes it a bit easier.
@fadhiimhero17037 жыл бұрын
Fjr afi what is the liqid by which you make the sponge wet and how much does this padle cost i mean the wood and the rubber cost
@shingoukiex7 жыл бұрын
mohammed asi I just used water. The blade is about 150 USD and rubbers are 70 per sheet.
@fadhiimhero17037 жыл бұрын
shingoukiex thanks alot in iraq we have cheaper wood and sheet but they are not as good as yours
@fajara61247 жыл бұрын
That is Viscaria right? 150 USD for that blade? Wow.. Here in Indonesia it's price about 97 USD
@dapperfob61945 жыл бұрын
Isnt it a big waste of material ? why do they make the rubber square ? New to tennis table here
@shingoukiex5 жыл бұрын
Dapper Fob they make it square because every blade has a different size, so if they make it round, it might not be big enough to fit some of the blades.
@dapperfob61945 жыл бұрын
Oh right i get it
@jsg14687 жыл бұрын
hey friend can I change the rubber from a wakaba 2000, I dont know because i bought it on a store and I dont want to make shit my paddle please answer me thanks.
@shingoukiex7 жыл бұрын
J SG yes you can. Just be careful when removing the rubber.
@solomonn.po992 жыл бұрын
What glue do you use?
@shingoukiex2 жыл бұрын
nittaku fine zi p
@gilbertchristianto25807 жыл бұрын
What bat you change the rubber
@RogerThat19455 жыл бұрын
Hello; Can I ask WHAT GLUE do you use, please?
@shingoukiex5 жыл бұрын
Roger Dodger I used the nittaku finezip
@mariadalee32775 жыл бұрын
Thank you!!
@timothyong9772 жыл бұрын
It is a bad idea to use hairdryer to blow dry the glue on the rubber as it will soften the rubber.
@TheTradersWay7103 жыл бұрын
Can you give those ones you changed?
@MicDropAJ6 жыл бұрын
Hey, what did you use to cut it?
@nihlify2 жыл бұрын
You can use a scissor or razor blade. Looks like he used some form of scalpel/construction knife
@AbsoulteBaller7 жыл бұрын
thank you for sharing, I'm wondering, did you seal (lacquer) your viscaria blade?
@shingoukiex7 жыл бұрын
Vu Nguyen no I didn't
@albeertsky7 жыл бұрын
any damage on your blade? how often do u change your rubbers? thanks.
@shingoukiex7 жыл бұрын
albert lopez No damage. I take a lot of care when changing rubbers especially when peeling. I change rubbers roughly once a year. Recently I've switched to Xiom rubbers because T series is too over priced for me to keep using on a yearly basis. Please watch the newest demonstration of my on gluing new rubbers! Thank for for your comment.
@stanisawkotowicz38614 жыл бұрын
@@shingoukiex I play with Xiom Omega VII Tour max on forehand and Tibhar Evolution Mx-s max on backhand on Tibhar Fortino Pro blade. Is it good setup? I am wondering if the mx-p on backhand would be better. Thanks
@fontexstudios2 жыл бұрын
@@shingoukiex are you using a scalpel handle with discarding blades? where did you get those?
@huyha99526 жыл бұрын
What is gule
@RogerThat19455 жыл бұрын
At 8:30 I would think marking the rubber, and laying the bat on the marked rubber might work easier.
@nihlify2 жыл бұрын
That just makes it harder to get straight and also you do it like this to avoid air pockets.
@florencealbano52717 жыл бұрын
my rubber has a scratch should I change the rubber or buy a new racket
@shingoukiex7 жыл бұрын
Florence Albano neither. A scratch on the rubber will rarely affect the performance.
@florencealbano52717 жыл бұрын
shingoukiex are you sure its a 4 inches scratch and I have a competition next week
@eo77705 жыл бұрын
Shing was saying a scratched , just a small one . Use your commonsence .
Hey, if a pair of scissors are very sharp, could we achieve that really good cut? Please write me! =D
@shingoukiex8 жыл бұрын
Santi Torres hello. Even if the pair of scissors are Sharon u still won't get a perfect clean cut because every time you stop to change the angle of the scissors you will get more or less an edge sticking out.
@santitorres93028 жыл бұрын
Thank you =D I cut the rubber with a blade and that give me a good clean cut thanks.
how can i buy a sharp knif like the one u have please
@shingoukiex7 жыл бұрын
The one I use is a surgical knife for operation. You can use any sharp cutter knife and it'll work fine.
@sion.z96437 жыл бұрын
i am kid playing tt can give me some any good rubbers for penhold backhand??
@shingoukiex7 жыл бұрын
I'd recommend Butterfly Bryce Speed or High Speed. It's the rubber that Wang Hao use.
@pepitolacaca78442 жыл бұрын
Does anyone now if the old rubbers can been use in other blade?
@jazzman1954 Жыл бұрын
Probably not. Difficult to glue and they will be dead rubber
@nathns13648 жыл бұрын
What is the thing on the side of the blade u peeled off
@shingoukiex8 жыл бұрын
It's a side tape that protects the edge of the blade from damage.
@nathns13648 жыл бұрын
Ok thanks
@shingoukiex8 жыл бұрын
Np
@gamingwithlucky93378 жыл бұрын
Nathz A rubber stupid
@gamingwithlucky93378 жыл бұрын
Lol
@wmw07025 жыл бұрын
Can you use Elmer's Glue on this?
@markanthonysantos8575 жыл бұрын
That was also my question.. someone mentioned that any water based glue is okay.. so my first thing that pops on my mind was elmers glue..
@nicolasalcauter7 жыл бұрын
Thanks for the video, I've never changed a rubber before but I was thinking on using a scalpel too, I've seen how rubbers look when they are cutted with scissors and that's just ugly.
@shingoukiex7 жыл бұрын
Yea. I'm not very good at cutting with scissors either. It ends up like dog bites lol.
@蓝鱼-s4h7 жыл бұрын
how much it cost in japan? the blade and 05 64
@shingoukiex7 жыл бұрын
thunerOCEAN blade is about 20000 yen. Rubber is about 7500 yen each
@ayushverma29805 жыл бұрын
I just did my hadraw VK without sealing it ut wont create porblems later right?
@RobertStop7 жыл бұрын
are you using Nittaku Fine zip.......
@shingoukiex7 жыл бұрын
Robert Stop yes.
@RobertStop7 жыл бұрын
the best of the best ......Finezip
@its_karrrtik6 жыл бұрын
Can i use donic viro clean..?
@shingoukiex6 жыл бұрын
kartik sharma yes
@shingoukiex6 жыл бұрын
kartik sharma yes
@eberjamn7 жыл бұрын
Are you able to use it after
@shingoukiex7 жыл бұрын
Yes. It's quite good.
@prajwolprajapati8307 жыл бұрын
where is amazon ???and which country
@XloreX507 жыл бұрын
Prajwol Prajapati amazon is an online shop.
@rozznertellen35467 жыл бұрын
Hey! Why do you need to dry the glue before putting them together?.
Imagine how nervous he is when putting on 80 dollar rubbers
@shingoukiex5 жыл бұрын
Not so nervous just looking for perfection.
@cynthiaabutan18137 жыл бұрын
What glue is that?
@shingoukiex7 жыл бұрын
Cynthia Abutan nittaku finezip
@fadhiimhero17037 жыл бұрын
how much this wood and rubber cost
@ArcticMonkey337 жыл бұрын
the Blade 130€ and the Rubbers per Sheet 56€.
@jom23297 жыл бұрын
what's glue you use this?
@shingoukiex7 жыл бұрын
jomtack kreanga nittaku finezip
@imranseyyad50068 жыл бұрын
which glue?
@shingoukiex8 жыл бұрын
Nittaku Finezip
@Bizija1234 жыл бұрын
Me five minutes into this, paddle broken into 100 pieces from rage.
@tobiasbomer23487 жыл бұрын
good
@tabl10s8 жыл бұрын
The rubber should be peeled across the wood grain and not along with the grain
@shingoukiex8 жыл бұрын
Howard Lindo thank for for your comment. Please read my description.
@paultran2716 жыл бұрын
If i buy rubbers online from this website www.megaspin.net/store/default.asp?pid=sanwei-ap-lightwei will i have to put in 2 orders or does the shipment contain 2 rubbers already?
@shingoukiex6 жыл бұрын
Paul Tran I’m pretty sure it’s one sheet
@paultran2716 жыл бұрын
T_T thank you!
@erikatan23066 жыл бұрын
you could have just bought a blade it is only like $5 or 480 piso in the Philippines
@RogerThat19455 жыл бұрын
Post me (your neighbor in Japan) this SAME bat & rubbers (Tenergy 05) & I will post you 5,000 piso.
@air_preep5 жыл бұрын
Cutting rubber sounds can be asmr
@radybou37987 жыл бұрын
your rubber is like 99% new why would you remove them?
@shingoukiex7 жыл бұрын
Rady Bou I've used it for a year and it's lost its grip.