How to change the speakers in a MK3 mondeo 2000 - 2007

Hi there! In this video I am trying to show you how to change the door speakers in a MK3 mondeo mine is a 2004. I replaced my standard speakers for the "Kicker 40CS684" 6 x 8s. First thing I noticed was how clear they are and the bass is better!! I used a wiring harness so I did NOT have to cut the ford plug off. BELOW ARE LINKS TO THE SPEAKERS AND WIRING HARNESS!!!
SPEAKERS!
www.ebay.co.uk/...
WIRING HARNESS
www.ebay.co.uk/...

[@markl7317]

Mate do you have product codes and company details where you ordered thanks

[@leeluxford6039]

Hi fella looks good i notived the amp power cable the way youve run it theres a better way and safer route then that theres a rubber bung were the loom comes through behind the nearside suspention top

[@blackrolee]

How did you fit in the facia properly? I have the same one, but i can't push it! :( :( thanks!

[@jonathanlang9711]

I'm bout to buy an ST220 and just wanted to know what dimensions the speakers are and of wich quality. And looking at those they will definitely get changed to a more beefy setup. Also looking at that wire diameter I'd just put some new wires with a higher diameter in there, wich is not that big of a pain in the ass and I'd not have to worry about starting a fire in the car when putting an external amp in with like 150W/channel. Then you leave the original wires in and you won't have problems like you said when reselling the car and wanting to keep the nice set of speakers for yaself. Also imma first look if the ST220 doesn't have a factory-upgraded speakerset that I could keep to go along with a more powerfull amp then the Headunitpower.

[@mwmm]

Hi mate, i know this is a bit necro posting but do you know if these speakers word alright with the standard ford headunit? I have the stupid ford denso sat nav systems and all I really want to fix is the crappy vocals on the standard speakers. removing the denso sat nav is a nightmare, i'm hoping they work without an amp.

[@jonathanlang9711]

Should be alright if the new speakers are a bit more beefy then the old ones. You got to look out for the impedance. Should be writen on the back of the magnet of the old ones. The new speakers should not be below that. Also to fix the vocals get some rather cheap tweeters that you can maybe install on your dashboard along with a cheap crossover like the Monacor DN-1. If you get this Crossovers you have to take a set of mainspeakers with an impedance of 8 Ohms. Most likely your headunit won't have a problem with 8 Ohms. If your old speakers where at 4 Ohms you might get a little bit less max. power output on the new ones. But often that's not even noticable till you crank up to full power.

[@666hicat]

Nice sound Cleer

[@slimjendoubi2424]

Nice video mate , how many watts are the kicker speakers ?

[@1krisz78]

rear door can you put such a thing ?

[@bonniebow245]

Are they connected to an external amp?

[@TheAitorc]

5x7 fit?

[@alexyoung3734]

can you send me the speakers if you still have them

[@davidhardarson9639]

So I'm guessing that 6x9 do not fit?

[@DJMATRIXVIDEOBLENDZ]

David Hardarson that's what I want to know too did you figure out if you could fit 6x9s?

[@fuzkyn]

I still wanna find that out... :(

[@bonniebow245]

5x7 or 6x8 nothing bigger

[@alexpopa8879]

song name please :) nice sound

[@danwright007]

Neyo one in a million

[@fasttracklap8480]

from 20 to 75w you gonna feel like it's soulless. you need an amp

[@jonathanlang9711]

I'm bout to buy an ST220 and just wanted to know what dimensions the speakers are and of wich quality. And looking at those they will definitely get changed to a more beefy setup. Also looking at that wire diameter I'd just put some new wires with a higher diameter in there, wich is not that big of a pain in the ass and I'd not have to worry about starting a fire in the car when putting an external amp in with like 150W/channel. Then you leave the original wires in and you won't have problems like you said when reselling the car and wanting to keep the nice set of speakers for yaself. Also imma first look if the ST220 doesn't have a factory-upgraded speakerset that I could keep to go along with a more powerfull amp then the Headunitpower.

[@matthewwilkins6156]

They are 5 by 8 just changed mine today fitted with no issues straight swap.