How to Change the VSETT 10+ Motor Controller

In this repair tutorial we go over the steps involved in changing the motor controller for you Vsett 10+ electric scooter. It's not as difficult as you'd think, just be patient with all those messy wires!
www.revrides.com
[e-mail]
360-888-7433
Stay in the loop:
Instagram: www. REVrides_official
Facebook: www.Facebook.com/REVrides
TikTok: / revrides_

[@whiteglovestudio]

great video! I have to open up the junction box for the phase wires in my scooter so I can secure the nuts locking down the wires, will be applying some threadlocker and silicone to be extra secure / peace of mind they will never short out... apparently these can be a common failure point and cause fires so better safe than sorry.

[@GingerOnWheels]

Great tutorial, thanks guys!

[@gorgeousj206]

Super informative and easy to follow. Would love to see more vsett 11+ repair videos.

[@michaelosullivan4112]

I would love to modify my ninebot rear plate of vsett or zero X 10 Some fella made his ninebot max with zero 10x rear plate and it's so tricky part to make it fitted perfectly without any issues

[@michaelosullivan4112]

Vsett10+ has 127mm rear plate

[@Alex-ti6du]

Thank you!!!

[@kriegernyq5366]

Shout out to alex from warrenty department . Love you bro lol

[@user-by5sn9sz6e]

Great video

[@RevRides360]

Glad you enjoyed it

[@commandotv4757]

Tack så mycket

[@roberthansson2172]

You got a new sub. i managed to fry my 3 weeks old vsett10+ controller today wohoo. Been reading about the P11 setting. And i keept it on 1 -_Q. and i was riding today on my lunchbreak, the display showed 100% battery. And i was driving abit to fast. And needed to brake hard, the tire was screeching, leaving smoke behind, so yeah a emergency break :P But after that the front motor was completely dead, some vibration etc. So i contacted the store, and the dude said, its mostly the controller. Luckily me i dont have to resend the scooter to the store, they send me a new controller. So hopefully (thanks to you) i have a working Vsett 10+ again :) Ill managed to remove the controller without problems, so hopefully ill manage to put it back also :P

[@frostybe3r]

Must be a pretty poor quality scooter then

[@TheJoram345]

The Electronic brake is the problem, Fries controller

[@alagappasgostan9982]

i got it.might be the same problem to my vs10 just now.the setting was the same,scenario and symptom also the same.might need new controller also😅.tq for mentioning that.regen system suck on these

[@lmaojasey921]

have the exact same issue! was it the controller or was it a fuse? please help me out :)

[@OKBAOK]

Thanks for the video, quick question, I put new controller on my brother’s vsetts10+ everything works, has the white wire speed limiter connected only on the controller. After installation the scooter drives only 15mph. They said disconnect it or cut the white wire to remove speed limiter. I cut it separate it, still 15 mph. Do you think I have to adjust something on the menu? thanks for the good video 👍🙂

[@ElectricScooterMan]

Yep been there done that. Never use regen brakes

[@sklip3419]

Does standart Vsett controller have BMS (Battery Management System) feature ?

[@oddsman01]

Anyone find an electrical schematic for this controller yet? I’ve looked for similar models with a single speed controller for dual 60v motors, but the 10+ is the only one I know uses one.

[@pronierdany3739]

Bonjour les contrôleurs de la Vsett 10 + sont-ils tous les même car j'ose pas en acheter un de peur que ce soit pas la la bonne référence.merci

[@LectricBee2.0]

Can you guys do a video on how to change the actual motor

[@RevRides360]

Its a combination of the tire change and the controller but yeah we will work on that.

[@raoulbergamote7648]

thank you for the video i hope i don't need it :D

[@RevRides360]

Us too! Ride safe!

[@conedprepper]

Good morning, question why would you replace your controller? Can it be upgraded? For a better scooter performance.

[@DARK_AMBIGUOUS]

No, it's because the Vsett ones are garbage and crap out after a year and they know you will need new ones, I have the 8 plus and my front wheel controller is jacked up and they refuse to send me a new one, I told them that when I'm riding in dual motor mode (the only mode that uses the front wheel) I can feel the front wheel struggling and randomly cutting out and coming back, they told me that I have to send them a video showing proof of this, how do I get a video of me riding it full speed and be able to show the scooter not having power sometimes to the front wheel. It's something you have to feel by riding it and it only happens once in a while, it's like they know I won't be able to do this so they hope I just buy a new one

[@scelusia4480]

If I have 1 Vsett 10+ motor and I would like to make an electric scooter out of it, can I use other controller besides the original one?

[@robertmotion]

my same question. no help online or anywhere. /Bklyn👑

[@corentinmartel4547]

Hi Thank you very much for this tutorial, I have a question for you if I have a problem with my Controller, there has been water, is it necessary to also change the display? thank you

[@RevRides360]

Thanks for reaching out! Send us an email ([e-mail]) for further assistance!

[@lonechapa2694]

I need some tips for my vsett 10 tires I had it for 3 weeks and got 3 flats on it. I weight 180 pounds normal speed 25-30 I don't use it aggressively just to go to work and school

[@RevRides360]

Thanks for your reply, we're happy to help! Please send us an email: [e-mail]

[@dano9704]

its common on vest 10+ and isn't directly indicative of tyre pressure - standard tyres are cheap CST. I found that spending money on PMT e fires reduced this a lot. I am in the works of trying to upgrade 11" tyres on it. I think the 10+ should've been put with 11" tyres IMO.

[@kelseywhite3014]

Here’s a tip don’t buy a vsett 10+ I’ve had nothing but problems

[@luke_man3242]

I have a question does sinewave better than square wave ? I don't have any clue with one is original

[@RevRides360]

Sine wave controllers typically have a smoother throttle response, while square wave controllers have higher efficiency and a more punchy response

[@hubi143]

do you guys have tutorial like this on vsett11

[@RevRides360]

Not at the moment but hopefully soon!

[@hekmatullahabdullah9679]

Wich v and ah must have the controuler for vsett 10 super? Tnx

[@RevRides360]

For further assistance please reach out to us via email ([e-mail]).

[@nolaneli295]

VSETT 10+ warning 6 out of warranty no idea what to do with it. Depression looking at it parts so expensive.

[@RevRides360]

Email [e-mail] for more help!

[@MyJohney]

Iv had my vsett 10+ for 2 months a 2 days and I'm getting error code 9 already. Iv not drove it like idiot iv took my time so I don't get why my controller is broken 😑

[@RevRides360]

Thank you for reaching out to REV Rides, for best assistance, please reach out to us at [e-mail]. Cheers!

[@ericsmith506]

Covered under warranty ? Blows my mind that a scooter $4000+ doesn’t have more that 1 year warranty (I have one by the way)

[@RevRides360]

One year seems to be the standard for most electric scooters. Although you can buy an extended warranty if you need it through our website so long as the product was bought from us and your first year isn’t up yet.

[@loganrides2436]

Having bad luck… both motors aren’t working neither is the headlight..

[@RevRides360]

Definitely sounds like a controller issue [e-mail]

[@loganrides2436]

@@RevRides360 I bought through Alien Rides, I just had it shipped back. Tried a new controller first but didn’t have any luck. Hopefully they can fix it.

[@thedragonslayer9249]

First step u did wrong. Is unplugging everything all at once

[@RevRides360]

We did it correct.

[@thedragonslayer9249]

@RevRides360 yes u did. But people who have no clue will just see there's alot of wires. And when yous know what wires are for what the people watching will have no clue. Which is why u should of taught them the proper way first

[@DARK_AMBIGUOUS]

Bro, you guys scammed me 😕

[@RevRides360]

Hey there! Please follow up with us via email ([e-mail]) so we can assist you with your device.

[@kelseywhite3014]

You almost have to follow all of these exact steps just to change your RIM. What an awful design I hate my vsett

[@kelseywhite3014]

@@Lover_Drama there is a way to adjust your take off settings that could be your problem

[@3406Accert]

Why would any escooter need a controller change in the first place ? Wear & tear or what ? I thought this component was a maintenance free item ? Meaning leave it & forget it , but obviously not another cash outlay every time these more than likely Chinese knockoff made parts.

[@RevRides360]

Wear and tear, Upgrade, defect.