How To Choose The BEST Sewing Machine!

[@stephanieray6587]

Back in the Seventies my mom bought a lightly-used Singer 401 from the Fifties, but neither of us could figure out how to use it, and so it sat in the guest bedroom all this time. With the help of the internet, I figured out to use it in 2020, and just love it. All metal body, pristine table, and perfect paint. Real time capsule.

[@nancylnichols]

I love the vintage machines! The new machines are mostly plastic or plastic parts. ❤️

[@neda2820]

My mom used one from brand new until 2010 and used it hard all those years.

[@barbaraglass2345]

@@nancylnichols no

[@dottiemathews6853]

YEAH! THE SINGER IS A REAL WORKHORSE OF A MACHINE AND THE VINTAGE DESIGN JUST TAKES YOU BACK. ❤❤❤❤❤❤❤

[@kimbroadnax2854]

this helps thank you so much

[@azcharlie2009]

I am 73 and just started sewing last year. My wife bought me a Singer 6125 from a thrift shop for $35. I sewed some heavy duty bumpers for my boat trailer and a few other things. Then, I bought a Barracuda 200ZW walking foot (similar to Sailrite, but not as good) which is a beast! I sewed a heavy duty cover for my airplane and saved about $200! I also recovered our patio furniture this winter. My wife also brought home a Singer CG 590, which isn't a walking foot, but it will still sew just about anything. It is probably just a step up from the 4452. Nice machine! So, I now have three machines, and I love them all! Love your channel, too... thank you!

[@salmahmohamed6048]

Goodness... this is, hands down, the BEST sewing machine purchase advise I've come across on KZbin. Most videos talk more about the machines themselves and what features they have or don't have... but your video focuses completely on the person that's looking to buy a machine, their needs, interests and situations. Very buyer-focused. Thank you so much for this video, it saves me watching tonnes of other videos trying to find the answer to my purchase question! :) :)

[@kimbroadnax2854]

It really does! It made me stop an pay attention!

[@thisbedazzledgirl]

Machines are important but the right needle size of a good brand is also very very important. Your machine can do miracles if you use the correct needle as well. 🥰

[@BlueprintDIY]

Facts! 💯

[@944gemma]

Totally agree.

[@juliesandoval6026]

Great information. 👍

[@janisbrunst4226]

And also use a good quality thread for your project.

[@valeriamoscoso9529]

I have a Janome 243S I sew leather, denim, PVC, as well as thinner fabrics and lingerie. Make sure you have the right needle and thread for your fabric, that's the best tip I can give.

[@BlueprintDIY]

Great information! Your machine sews a really good range of fabrics. 👌🏽Thank you! 💕

[@mariamataleo6784]

Do you recommend a specific sewing machine for a beginner!? A super beginner !! :) 🤦🏽‍♀️

[@cbryce9243]

Wow, I have never heard of sewing though PVC! I'm going to have to look for this machine!

[@tabitha8207]

Hey Valeria, how do I get this machine? Janome243s. I checked online didn't see.

[@wolfsbanebloom]

@@tabitha8207 It might be a typo because there is a 423s model :)

[@marathonfortruth4768]

Where to start? Oh my there are so many considerations. I have 50 years of experience. I have 2 machines currently but have sewn on top of the line and low end. Avoid really low end. Beginners should not be burdened with the frustrations of a low end machine. And one machine will not do everything you need in your lifetime of sewing. This was a pretty good overview of considerations. Not mentioned is the 5 mm versus 9 mm stitch width. My high end Bernina sewing /embroidery machine has 9mm width. Has interesting stitches but I ended up not using them and the increased size of hole beneath the needle allows the fabric to be drawn below to the bobbin area and become stuck at times. The feed dogs are set wider apart so that smaller pieces of fabric don’t feed well. Just pointing this out. I would not buy 9mm again. I sew garments mainly. 5 mm is better. For me, who sews garments and home decor, the best combination is two machines: 1) A heavy duty one and 2) a middle of the road machine with a fine stitch quality, several buttonholes one step, speed control, needle up/down, needle left /right adjustment. Consider the feet available too. Purchase of a sewing machine is worse than buying a car! More options. The second machine I own is a 5mm machine from Husqvarna that is middle range in price and excellent overall. My back up machine.

[@BlueprintDIY]

Yes, it is so annoying when your fabric gets drawn into the abyss. 😩 Great information!! 👌🏽 Thank you so much!

[@lvlatka]

Hello there, tell me more about your Husqvarna machine. Which model do you own?

[@nkha23]

Husqvarna Viking Jade 20 and Designer Brilliance 80 owner here. I just converted from Singer back in May. Ironic the difference in experience i had considering both are part of the VSP group.

[@lvlatka]

I just ordered my Husqvarna Viking Jade 20...should arrive tomorrow...woohooo sooo excited I have butterflies in my tummy.

[@lvlatka]

Thank you for your time and great advice.

[@solj3322]

Thank you for this awesome video! I love my Singer 4423 Heavy Duty, it is perfect for me. My biggest driver was something I could grow into. I make costumes, and do a variety of projects, and really didn't want to be hindered that my machine couldn't handle thicker or heavier fabric. I do agree that you really want to think of all her questions thoroughly for sure, because what works for one may not be ideal for another. I understand my machine is super fast, I like having the speed, it works for me. However, I've met some amazing folks just starting out or who have sewn for awhile who prefer their machine to be more slower pace and that's totally ok too! To really drive home, the best machine is the one you're going to use! Thank you for your content, I truly appreciate your thoughtfulness and energy when making these. Let's keep on with a community of positivity and not throwing shade on others.

[@janejones3541]

I have an very old Singer. All metal. It weighs 40 pounds at least. I have sewed enough seams to go to Mars and back at this point. I am still using it. Its worth its considerable weight in gold.

[@maureenausbrook8763]

Thank you so very much! I'm very much a beginner and feeling overwhelmed with so many choices. Your video has been very helpful. I want to sew decorative pillow covers, make cafe curtains, simple things to start. I don't want to waste money by over buying or under buying. I think you've given me clarify and focus. Thank you!

[@josephina4792]

Have you decided what to buy?

[@jamiawoods3406]

I’m looking to do this exact thing, does anyone have a specific machine recommendation for pillows and decor to be created?

[@loughton57]

@@jamiawoods3406 Ditto! But we're not getting any answers here🤔I'm a beginner too and I am thinking about the Brother LX 3719🤷‍♀️

[@MsXtianFonk]

This is one of the most useful videos I will ever see on KZbin. Thanks to Angelina’s excellent presentation, I discerned that I really am a computerised machine user (due to 26 years sewing with a Husqvarna Viking 1050). Watched the vid several times, wrote down the list questions and after a little more research secured my dream machine for today. “Bernadette” has 394 stitches, including alphabets! Thanks again, Angelina.

[@BlueprintDIY]

Yayyy, I’m so glad! Congrats 🎉

[@hildahernandez6375]

I agree! So thorough, concise and so entertaining! So pleasant demeanor! Gorgeous skin too! What’s your secret!

[@hildahernandez6375]

Did you ever mention the model of your Bernina that your husband bought you long ago?

[@bridgetjones8339]

I sew clothes, upcycle, curtains, home goods and some bags. I’ve owned a singer, brother, and a white basic machines. I recently spent more money and bought a juki f 300 series and I’m in love. If you can afford it (affirm for me) it’s so worth it and increases your enthusiasm for sewing. You just enjoy it so much more when your machine is a joy to you. Bobbin winding is a big one for me, knee lift, and auto threading, and cutting awesome. Having a serger is a must for me. Juki is great Mo-50. My backup sewing machine is a refurb HD singer right now.

[@brittanystone192]

I have an old Bernina from the 70s and I love it so versatile lots of different stitches and I sew quilts, clothes, cosplays and accessories

[@curiouscat3384]

Thank you sew much! Great discussion for first time machine buyers. I began sewing in 1963 on my mother's vintage 1942 Singer! Over the years I used that machine until I started getting hand me down machines, mostly Kenmore. When I started my Etsy shop in 2014 I bought a 1965 Kenmore heavy duty machine that has served me well. Now it's dead and I'm shopping around. Which makes me a "Beginner" machine buyer because I have not kept up with modern options. I agree, a single step buttonholer is crucial for dressmakers. Also consider how many of those fancy stitches you'll actually use. Most mechanical machines offer at least a few basic zig zag and curvy stitches, but the industrial machines do not - they're typically just straight stitch that I've seen. Then a serger is needed to deal with finishing seams. A little disappointed you did not mention stretchy fabrics - most dressmakers use knits nowadays so it's really important to understand the presser foot pressure, walking foot or rolling foot options, rolled hems, etc. before buying a cheapo basic beginner's machine (certainly for design students :)

[@myronak09]

I have watched a lot of videos about choosing the right equipment for sewing, crochet, knitting, etc. This is BY FAR the best. I love your unbiased advice for picking the machine that is best for the viewer. Thank you!

[@BlueprintDIY]

Thank you 💕

[@tanyazheng5669]

This is the best products review ever. You know sewing, you understand beginners’ need, so many helpful information, so many details, absolutely loved it. Thank you.

[@BlueprintDIY]

I'm so glad!! ☺️

[@gnomcicle]

@@BlueprintDIY thank you!!! you raised a lot of points I hadn't considered and I now understand why serious crafters own multiple machines 😅

[@ohmyaflood]

just won a contest on tik tok to buy a new machine for my small business and I can straight to the DIY queen for answers. 2020 has been a blessing for me in the end I'm so thankful for this community and the universe pushing me in the right direction.

[@BlueprintDIY]

That's so awesome! Did you decide on which machine to get?

[@ohmyaflood]

@@BlueprintDIY not yet still a little overwhelmed but I definitely want something for denim

[@ohmyaflood]

So far the 4423 singer looks good. I also do some embroidery so not sure if that would be helpful too

[@jeanninebooth6415]

Bernina mechanical, janome mechanical, and huskystar mechanical. Grew up on a Kenmore and a old singer that were frustrating. Got my Bernina in high school and never ever have had any issues. Ended up with the janome and huskystar for my kids to sew and as portible machines to sew with friends. Love them as well. No issues. I do quilting, clothing, and household this and that.

[@yoshiew05]

my Bernina 93. Bought it new in 1984 and have had dealers offer me a good amount of cash for it. But why? I love it and it still works a charm.

[@AGreaterAmerica]

My wife and I use the 385 series Kenmore sewing machines. We currently use the model 1622, though we don't use most of the fancy stitches. We appreciate the extra high lift presser foot for thicker materials. It doesn't replace an industrial machine for power, but is the next best thing. As I am retired, and still refurbish sewing machines, I tend to have a number of them in my home, but very much prefer the Kenmore 385 series (manufactured by Janome), or the New Home mechanical machines that were manufactured by Janome, also. They do also have that same extra high lift presser foot. Thanks for the great videos that help in choosing the correct sewing machine. Keep it up. There can NEVER be too much info on that.

[@Sumogrits]

Hi! This is my story. My main reason for plugging up any sewing machine that I own is to first and foremost, make clothes. Like many other sewers out there, I occasionally sew a Holiday craft project too like ornaments or pillows but only every now and then because my passion for sewing started with clothes. Whether or not the machine makes a loud noise as it sews is not an issue for me- only a few electrical items that I own with gears and motors don't sound loud when in use. The reason I own multiple machines is because I like to be prepared when inspiration strikes; (for example) I may be piecing together a quilt block on one machine while a favorite style of pants are made on another, all without the hassles of switching out colors of threads to match what I'm sewing. It's fun to have so many presser feet and stitches to choose from but by the time I learn to use them all, I will be done with that machine and ready to move on to another yet, affordable upgrade. If it doesn't come with a cover, that's OK I can sew one. Just as she spoke here, to further help someone, you may ask, what does all this have to do with choosing a sewing machine? Answer: different strokes for different folks, speaking from a journey thru over 45 years of sewing. Unless you sew a lot, I suggest start small and grow big. (I see no sense in paying multiple $100s or $1000s of dollars for a machine that just sits there 90% of the time. For another example, some machines have a tendency to 'lock-up' or malfunction in the gears or parts if not being used or oiled over time. I've had that to happen before). Consult the manual before doing anything to it and follow the manufacturer's instructions to a "T", they made the machine so they know what's best for it and contact them when you need to. Thanks for sharing your video with us!

[@12345liberty]

I have a husqvarna 118 had it about 10y I love it has all the stitches I need, automatic buttonhole, speed control, has a button for putting the needle down so you don’t lose your place turning corners etc, it sews heavy fabrics, I’m currently up cycling a leather jacket that was my husband’s (which I’ll post on the renegades fb page I’ve nearly done it!) it’s sewing though the denim and leather together brilliantly, it hasn’t got loads of stitches but tbh I only use straight, zigzag and buttonhole, I also have a singer overlocker I bought in Lidl only just started using it (it scares me a bit!) but I do like that too. 🥰

[@wendybrda.4136]

I'm looking to upgrade soon. How many times do you need to service your Viking?

[@mirelacretu8741]

@@wendybrda.4136 I have the same machine and totally agree with her comment. The machine is oil-free (no need to oil it) and if you keep it clean it will work like a charm. I had it for 7 years and never serviced it. I do clean it regularly and use a proper needle and therad for each type of fabric.

[@mrsmojet1]

so based on your review a month or so ago I bought the brother strong and tough secondhand from amazon. good machine. Fyi, not sure if you have noticed but most if not all sewing machines are sold out everywhere. Except the expensive ones

[@carolburton5853]

Hmmm...could be because more people are at home and finally giving sewing a try. Interesting observation. Hopefully by the time I’m ready to buy inventory will have corrected.

[@anointedhands9749]

I saw that as well

[@lizzieb6311]

Thank you for this video. I have a Viking Emerald 116. Basic.. simple… works beautifully for me. I’m a beginner and am sewing decorator pillows; window shades; simple blouses and sun dresses. It’s easy to do zips and buttonholes. It’s perfect for my skill set

[@hildahernandez6375]

I have an Viking Emerald 122 and I LOVE IT! I almost bought a Janome 5000 as a second machine so my daughter and i can saw together. I figured she’d use the Viking while I try the Janome but my heart just got stuck on the Vikings so I bought another Emerald 122 on eBay. Waiting for delivery and I can’t wait. This machine is so smooth! Maybe one day I can allow myself to try another brand but for now I’m sticking with Husqvarna Viking ❤

[@lizzieb6311]

@@hildahernandez6375 Congratulations on your new machine! Have fun getting her all set up and ready for projects 😎 I’m with you…the Viking Husqvarnas are solid and reliable machines…it’s smooth and steady and sews perfectly. It is fun dreaming of a fancier machine, but I cannot justify it when I love my current machine so much. Enjoy!

[@Gdsydney]

You are really an Angel, just GOD sent! Ive taken some interest in sewing lately and for months have been thinking of buying a beginner sewing machine that i can just ease into... and this video just sums it all up. And this is the very first time i commented on youtube cos any beginner would really appreciate all the knowledge that ur sharing,( in an unbiased and very lively manner, which doesnt really go together most of the time lol) so we can make an informed choice! Thanks so much and more powers to you!!!

[@BlueprintDIY]

Thanks so much!! 😁 I hope you find the perfect machine for you. 👍🏾

[@mobius2684]

I have a Janome HD-3000. I make a lot of various types of costumes and clothing, so I tend to sew with various different fabrics ranging from chiffons, spandex/knits, vinyls, denim, upholstery, and fleece. I used this machine for about 4 years when I was doing etsy selling blankets so I did a lot of fleece. It handled all these fabrics very well, but I would usually take it in for service at least once a year and a half for servicing. This video reminded me of my fabric store working days and I would get the question from customers as to what is the best sewing machine and I would run them through some of these questions. Some would just kinda brush them off and just want an easy answer with the small selection of sewing machines we offered in store, where others would actually listen and answer these questions which in turn they'd find a sewing machine they liked and worked for their needs and they'd come into the fabric store more often for their projects. Love the video, its very informative

[@robertfurlong546]

Hey there! I'm looking at getting a used janome HD-3000BE, and I also plan to use it for garment construction, particularly corset making and gowns. Would you recommend this machine for those purposes?

[@mobius2684]

@@robertfurlong546 I would recommend it for garment construction as its fairly solid in that department. Didn't really make any corsets or gowns, but the materials I've seen for those items I've used on the machine before and it was able to handle them just fine.

[@ritakay9858]

Thank you for this post. I have been looking at many different sewing machines, and it gets confusing and i end up frustrated. After watching your video, i now know guidelines on the kind of sewing machine i need to be looking for. Honestly, this is the best resource video on how to choose "my" sewing machine. Your video is the absolute best and ive watched many, so thank you, thank you.

[@sophiarose03]

I have a 50+ year old singer. Pros: it can sew things. Cons: IT DOESNT ALWAYS SEW THINGS.

[@graceygal2664]

I have a singer clone and OMG it is so temperamental One day it sews denim next day nah One day it will sew through a corset bone next day don't even try to sew through polyester

[@curiouscat3384]

I have my mother's 1942 Singer that still sews like a dream, smooth, no tension issues..... Only problem is it is slow and only straight stitches. But I still love to use it for simple household mending or projects like napkins etc. Sentimental as I learned on that machine when I was 10 yrs old :)

[@kimswartz9107]

Oh hey that is me! I have a Singer Slant-O-Matic 401a and when it works it is great! But it needs service and is temperamental and I just don't want to have to baby it all the time anymore. I have mostly sewn clothes on it.

[@QueensNative]

🤣

[@moonlight_5836]

😂😂😂😂

[@Froogsey]

Excellent video. For 25 years I was using a Singer Scholastic machine. It worked great but wanted a few more stitching options. I bought a Singer Patchwork about two years ago. Great machine-sews so smoothly and lots of stitch options. Recently, I started sewing tote bags and the Patchwork sewed really well through all 9 layers of the fold over bag. What I found that was tough was it didn't have wide enough space to make the turn without bunching up the fabric and then the stitching wasn't even along the edges. On Dec 31 while at JoAnns I looked at machines. My price range wasn't a lot and I really was just browsing. I don't need a lot of fancy stitches as I found I didn't use them. What I needed was more space in the throat area. The sewing lady at JoAnns was really helpful. She ask questions and showed me the Husqvarna Jade 20. It was on sale in my range. She did show me a few other machines. Most out of my price range. but also for the amount of sewing I do, I just couldn't justify the price. She suggested the Jade 20 so I bought it. The features are what I am looking for and the throat is almost 8 inches wide. It sews so smoothly and it's quiet. I love the features and the way it stores itself in one. So far, I am very happy with my purchase.

[@darlatidwell6255]

Alot of good points to tell my family about my Christmas present, they can all go in together and get me a good sewing machine. TYVM.

[@curiouscat3384]

So what did you get ? :) :) :)

[@darlatidwell6255]

@@curiouscat3384 No new sewing machine yet. ☹️

[@debrajacobson6544]

i have a white 77 made in the 40's that i got for $17 at salvation army. i paid $130 to have it reconditioned and the electrical fixed. it's all metal and weighs like 40 lbs. it only sews straight stitches but handles denim and leather like a beast! i love it. i also have a singer serger and love that for a finished look on clothes and finally a husqvarna 100 for a reliable basic sewing machine. i sew a lot of clothes and recently made a dress from a table cloth, a puffer jacket from a sleeping bag and a raincoat from rubber backed curtains. i am very inspired by angelina and have done a few of her denim projects. keep them coming please!

[@BlueprintDIY]

Thank you!! 😊 Your white 77 sounds amazing! You can't beat $147 for a workhorse like that.

[@debrajacobson6544]

@@BlueprintDIY thanks, you are so inspiring, you have been a great comfort during these strange times. please know that you are much appreciated.

[@helenwade9349]

I have a Toyota sewing machine - it's 30 years old - it's a sturdy mechanical machine and covers the basics well. I have sewn 4 layers of denim but I haven't tried leather yet. It has a four step button holer and 8 other stitch types. I have used it for general domestic sewing over the years curtains and tablecloths etc but recently have been using it for up-cycling, resizing clothes and dressmaking. As I'm not in the market to buy another sewing machine I don't know wether Toyota still make them! But I'm very happy with it.😄

[@photoliv42]

Great video & info to help to decide the right machine! I’d like to suggest 1 more factor when buying sewing machines. When I jumped from a basic Singer machine with 12 stitches to more of a work horse (my Juki TL 18QVP), initially I couldn’t fathom why anyone would want a sewing machine that exclusively did straight stitch. I thought more was better! As I did more research & thought more about what I sew, I realized that 90-95% or more of what I sew used only straight stitch. That 1 realization steered me toward a mechanical semi-industrial straight stitch machine, rather than a machine with a variety of stitches I’d likely never need or use. Knowing the type(s) of stitches I would commonly use helped me determine if a computerized domestic or a mechanical semi to industrial would suit my needs. Thank you again for your extremely useful info! Wish I’d seen this before I had to do all my research LOL.

[@BlueprintDIY]

That’s a really great point because I hardly ever use those fancy stitches.

[@autismwithavoice5507]

When I started sewing I was six years old. at the time I started out on beginner Singer sewing machines and from that point on I would occasionally do sewing but when I really started stepping up on sewing was at the beginning of the pandemic. There was such a huge need for mask that I ended up getting back into sewing and for me since I do have autism remembering a certain skill is really easy to me. My friend bought a sewing machine and she was not using it so she gave it to me. It is a brother lx3817 which works perfectly. For me I've always believe that singer is the brand to go with but when I started to use the brother it was amazing how well it's sews. For me I personally love brother and singer because there's nothing negative to say about the two brands. Now I have a vintage singer that's from the 1950s or 70s and it still needs repairs and I'm working on it but it is beautiful. I also still have my brother lx3817 and I use that a lot. It was able to go through multiple layers. I thought with a beginner sewing machine just like this it would struggle but it went through 10 layers of cotton fabric with ease. I've even gone higher then ten layers. I'm just impressed by how reliable this machine is. Now I'm in the market again for a new sewing machine. Right now I'm looking at buying a Singer heavy-duty 6380. I personally like the sewing machine because it has a lot of accessories to itand from what sooner has said is that the machine is the same like every other heavy-duty except it has a few more accessories to it which I really like. the Singer heavy-duty that I'm looking at buying will not replace the brother in any way but help take some of the pressure off of it so I can do a lot more. I love my brother lx3817 a lot but the same time I also want to have another singer that would give me the ability to do a lot

[@DCFunBud]

This was really helpful in selecting a machine for a senior newbie. This lady was a real find!

[@DCFunBud]

Follow up: I just purchased a Singer 4423 Heavy Duty. Wish me luck. Thank you, Angelina!

[@adaisychain5]

This is by far the best video in how to choose the right sewing machine! I have a Bernina 930 and even though it’s an oldie, it’s an excellent machine! I bought it used back in the 90’s because I sew and repair jeans so I needed a machine to go through those seams! I am looking for an updated machine, but a basic machine, not computerized, to sew thick fabric. Your video was such good help!

[@BlueprintDIY]

Yayyy, I’m so glad!

[@paulakirkland3385]

I LOVE my Bernina 475. It is worth every penny. I have been aewing for over 50 years. Some machines do not have the pressure or ability to aplique well but mine does! My Bernina overlock machine is a reak work horse. My church did a massive Days for Girls project. My overlockers was sewn on for 3-4 hours a day, 6 days a week, for 4 months and did mot miss a stitch.

[@rdfjfgjyfdhfghy67456]

Once again back at this video because I'm trying so hard to choose a sewing machine within my budget! It's like you're talking right to me! It's coming down to "cheap, comfortable mechanical" or "expensive, well-reviewed computerized!" The best sewing machine I've used is the Brother FS101. Easy to switch stitches, loved the speed control, but ultimately did not have the kind of auto tension that I needed to sew knits.

[@BigRatNuggz]

When I was in the 7th or 8th grade there was a sewing class I took and I adored sewing. I still have my Pj shorts I made but I fell out of sewing because I was a child and my mother didn't see a reason to get me one. Now I'm 19 and I want to make my own prom dress and fill out my wardrobe.

[@T071901g]

I just bought a Singer sewing machine 7258. I don’t sew very elaborate items. It does have a automatic needle threader, drop in bobbin, plus 100 built-in stitches, of which I’ll never use. . But I enjoy it,

[@ooohlaa13]

You are most gracious, generous and helpful. You have given this a lot of thought and it is very helpful. Thank you.

[@JoshBombFiberArts]

I have a Singer 9410. EYE like it....I keep up with the maintenance, so it sews like butter. It was given to me a few years ago. I mostly use it to finish my cross stitch pieces or needlepoint pieces. I'm just now starting to actually get into sewing. I've been starting with bags and things like that and will be working towards clothing here soon. I also have a Singer Heavy Duty serger.

[@parrots9220]

Could not agree with you more, you covered a lot of very valuable points here. I own a Juki HZL-G220 it’s a computerised machine, that I LOVE, I’ve used it for clothing fabrics, faux leather (going through 2 layers of faux, 2 layers cotton and 2 layers batting) fleece, chiffon, vinyl, denim etc and it just glides through anything I throw at her. I love how sturdy the machine is with no shudder (it is not a light machine) has a great throat space and a few bells and whistles that I really wanted, stitch quality is beautiful, every time I work on her I am amazed at her performance. A must be kind to your machines buy good quality threads and needles makes a HUGE difference.

[@lilhat13x]

Hey, I'm thinking of buying the Juki Hzl G120 but I can't find anyone who has a machine like that. Did you regret buying it or was it worth the money? What is the bad thing about it or something you don't like about it? Thanks a lot

[@ansbach74]

The first thing I look for in any sewing machine now is one that makes a buttonhole in a nanosecond (one-step). I learn how to sew when I was very young. I just remember using that singer machine and attaching the buttonhole maker and turning that fabric in all sorts of ways. Never no more. One-step button for me and all the other bells and whistles will follow (◕‿◕). I have the Brother SM2701. It works great for the amount of sewing that I do me. Great information and thanks for sharing.

[@nikaj111]

Can you sew through denim with this?

[@glamygirlie6829]

Brother 1100PRW. I sew everything... dresses, masks, denim, sweaters, thin and thicker material, it does a Beautiful job! It has an extra foot lift too so it accommodates thicker fabric. I just ordered a Brother HC1850 and I hope I am as happy as I am with my 1100PRW.

[@martalencastre8176]

I was restoring a rocking chair but could not find pillows for it anywhere so decided to make some. Never touched a sewing machine in my life. Found the 30 min cushion in the Sailrite chanel and bought a Singer Starlet 354 from 1974 in a thrift store for 40 usd. It came with all the accessories but people told me I should get it serviced. So I went to KZbin again, found an awesome chanel and open up the machine, cleaned it all, lube it all and closed it again. Works wonderfully, I learned a lot about how a sewing machine works by doing that. Last week the original foot pedal died, and I tried to "tinkering" it but it was beyond repair this time 😂😂 The pros of buying a "vintage" are: is super sturdy as the insides are entirely in metal, as per usual back then. I've sewed through 4 layers of a thick outdoor waterproof fabric without a hiccup. It was insanely cheap for what I already made in it. The cons are: it may not be easy to find replacement parts if needed. And it may not have some of the functionalities of a more modern one (although I find my particular one quite complete)

[@courtneytwait3351]

BEST!!! video by far about how to decide which sewing machine to buy! Not only is the production quality (and her make-up) on point but I love the questions she thought of to determine which machine is best for you. Surprisingly, even with the 1365345 videos I’ve watched tackling this topic, a couple of the questions she mentioned were brand new and were really great at helping to determine which machine is best for you and for the right reasons!

[@notconvincedgranny6573]

I have a basic entry-level Pfaff (my first purchase 30+ years ago), an old school Singer heavy duty, a Euro Pro, a Singer Futura embroidery, a Brother 4thread serger, a Singer 5thread Professional, a Morse (inherited from mom along with the heavy duty) and a White (gifted from a family member). No matter what machine, needle and thread pairing with the fabric is paramount. And I tried the Brother Quattro at my local machine store, and while it does a lot, I'm not going to use all those bells and whistles. Beware of features you will pay for, but never/rarely use.

[@kimmyg990]

Thanks for sharing that. I feel encouraged to buy something new very soon. I thought I already had too many machines, but you can never have too many.

[@neda2820]

I realize this is over a year old but a very important for me was how reliable and how smoothly does it run? All the needle threader on my machines operate manually, thought they all did. My first two machines were mechanical, one a White and one a Bernina 900. I literally wore parts out on both those machines because I used them so much. Love my Bernina now and it’s a good mix of computer and mechanical.

[@christybrockett4600]

Thanks!

[@BlueprintDIY]

Thank you so much!! 🥰

[@meon3wheels]

I had a Husqvarna Viking Constitution for 30+ years. When I retired I decided that I wanted a newer computerized machine and bough a Husqvarna Jade 20 for myself. I love it!!

[@marshallthepupakathebricks2853]

My old dog is a Singer Touch-Tronic 2000 from the early 70's I think! 1st computerized machine on the market so they said but is just now starting to keel over! Not much I don't or won't sew and have been tailoring since early teens. Need speed strength and creativity too. Folks said they'd help w/car or get me a sewing machine...Been saving for YEARS and love my 02 Ford truck so probably getting a couple based on this awesome video. (picture is my sons so sorry) Blessings!!!

[@ShariLynnSmith]

I currently own a Viking Topaz I sew some clothes, do mending, quilt & embroidery. I like my machine it has a few issues but would purchase the newer model of the same machine. Mine was the 1st and they've fixed the issues. If your just starting out and don't know what you'll sew or stick with, I always suggest the heavy duty under 200 machine. If you end up wanting something better because you do end up sewing a lot you'll always be happy you have the heavy-duty for things that put pressure on your "good" machine. I do have machine for canvas and stuff like that & I'm glad I do.

[@janisbrunst4226]

Agree and love your thought that the best sewing machine is the sewing machine you use to create projects.

[@RubyComet7]

I haven’t sewing with sewing machine in a long time. Bought the si gear heavy duty 4452. It was between the new brother st150hd and the singer 4452. My mom always had a singer when I was a little and she trust the brand. So I went with the singer 4452 since it was cheaper even with ext warranty. Got it and tried all the stitches out and works no issues. I also found my 9 yr old daughter a new brother sm3701 for $40 off Facebook market. I taught her how to thread it and thread the bobbin. Only thing I wish sinergia had was the same bobbin system as the brother machine. Other than that I thought singer was easier to thread than the brother. My daughter likes sewing machine and I like mine. Both are stitching nicely

[@jameskeyes1131]

You have the BEST videos on KZbin. I love your attitude, humor and knowledge. Thank you for doing this. I just bought a Brother GS2700 to learn to sew and get good at it. It was cheap and has many features and gets good reviews. I will be watching your other videos and loving what you do. You seem like a fun and very smart person. Thank you so much.

[@BlueprintDIY]

Thanks so much! 🙏🏾

[@aholaway3048]

I have a Singer Patchwork. I've learned that sometimes I get the needle feeder to work, sometimes it doesn't. It doesn't like starting at the beginning of the fabric. It has a lot of features. I wish I had a different general pressure foot. I'll use it until it no longer works. I've owned it for over 5 years and am now just starting to use it on a regular basis as I begin my sewing journey. Your video was extremely helpful and informative.

[@_gabeybabey]

I just got my first machine which is a babylock joy and it is so smooth like butter. Can’t wait to see how it holds up

[@katecapek3116]

I have a modern Singer 4452, which is very beginner friendly, but does not have many decorative stitches, and doesn't do thin fabrics well unless the hole is taped. So, I recently got a vintage Singer 401a, which (if you have the optional cams) can do a TON of decorative stitching and won't eat lace, chiffon, tissue silk, etc. Obviously, I like all metal geared, non computerized machines. The 401a has the advantage of being direct drive, so there is no belt to wear out.

[@BlueprintDIY]

Super helpful! Thanks so much!

[@maggiedvorak1323]

I also have this machine and love it! I haven’t played with all of the options, but where i run into trouble is adjusting it for different material types. I wonder if timing is off or I’m just not using the proper needle and or tension, although I’ve followed guidance for those both. This machine with the cams and all the add on options truly is AMAZING! I also feel it’s widely available, from what I’ve noticed, by people who tune and resell older machines

[@katecapek3116]

Maggie? Regarding your 4452: if it's using straight stitch on lightweight fabric that's giving you trouble, try putting a strip of masking tape over part of the hole that the needle goes through (on the bed of the machine) and see if that helps. Vintage machine usually had a separate plate for straight stitch that had a SMALL round hole instead of a slot. The 4452 has a rather large slot for a machine with a ~.7 amp motor, so it tends to eat lightweight fabric.

[@maggiedvorak1323]

@@katecapek3116 oh no- i have a 401a!

[@katecapek3116]

Aack! Sorry for the erroneous assumption of "that machine". Switching needles and/or needle plates makes a HUGE difference between fabrics. I don't mess with the presser foot pressure at all with the 491a. FWIW: The 401a is my go to machine for using really heavy thread. My other 2 machines have trouble with it.

[@solarwinds-]

I have a Bernina Activa 130. I sew garments, I'm intermediate sewer. Pros: It needed repair once in 30 years. It has pretty stitches. It never skips stitches, it never tangles the thread, it never breaks the needle. The foot pedal transitions speed very vey smoothly. Easy easy easy changing out the needle and pressure feet. No tools needed. Cons: it makes lousy button holes, it's a 4 step button hole, no to auto functions albeit it is computerized and it's hard to tell where the needle is coming down when you start sewing.

[@BlueprintDIY]

Thank you 💕

[@kimsaidit5732]

I'm so excited for you. Thank you so very much for all your research and advice ❤

[@BlueprintDIY]

Thank you!! 😊

[@Vonasewlitty]

I have the Brother LX 3817 the begginners baby. And I had it for only 6 months and it just jams too much & the feed dogs are trash to thin and stretchy fabric. I even changed the needles and tension. Im over it. Im getting advanced and im ready to move on ☺️

[@Cheeks217]

Saaaaaammeeee!!!! The doggone feed dogs have made my pressure go up for the last time lol I'm on the search now for an upgrade thats still reasonable. I forgot how overwhelming it was to make a decision 🤷🏾‍♀️

[@bridgethunsucker]

Singer beginner machine here acting the same way! I’m so over it. Time to upgrade. I’m thinking spending $350 or so would be reasonable.

[@erickajstevens5737]

Thank you for this video. I own a Singer Simple 3116 (16 stitch) Sewing machine. I've owned it for going on 14 yrs. It's a beginner to intermediate machine. I've made pillows, pillow cases, table runners, dresses, jackets and mini purses. I would like to upgrade to a heavy duty machine with more decorative stitch functions. I'm still torn between a computerized machine vs manual machine.

[@BlueprintDIY]

I have a new video coming out tomorrow morning that may help you decide between mechanical or computerized. 👍🏾

[@erickajstevens5737]

@@BlueprintDIY Okay, thank you!

[@rahmahreg7501]

How much is it and how can I get it

[@erickajstevens5737]

@@rahmahreg7501 I'm not ready to sell it as yet. Still haven't gotten a new machine to replace that one.

[@christybrockett4600]

I wasn’t sure if I was going to be able to stay with sewing so I did not spend a lot. I am learning to sew clothes. I have a Janome New Home Easy Sew. It was about $100. It has a metal frame even though it comes in cute colors. It has been a good machine to learn on. Comes with many different presser feet and stitch options. The only reason I am looking for a new machine is that I want speed control and a one step button hole. Thank you for this video! I now know what I like, want and need in a new machine.

[@BlueprintDIY]

I really like the Janome new home as a starter machine. It sews really well, but I can understand wanting a one step button hole. 👌🏾 I hope you find the perfect machine for you!

[@enidchristine506]

I have only ever used an industrial sewing machine. I have never owned one at home neither. I know , sounds crazy. However, I am on a mission to find the best one for me at home for the most economical price... I have to THANK YOU for all the points you have shared & the recommendations you have made. It made my search much easier. I was very concerned about wasting money on a slow machine. Now I have great guidance points!

[@charlenecoke6636]

I have a singer 401A. My mother bought it new 61 years ago. She gave it to me on my 13th birthday and bought herself an identical sewing machine that had been used less. It has been the best sewing machine for me at home, I have had other machines but theres nothing better then old trusty. At home I sew quilts, curtains, repairs, crafts, and I have just started upcycling. At work I use a variety of machines, an industrial Juki straight stitch industrial machine, and a juki box stitch machine air driven computerized , also a Mitzubishi box stitch also air driven and computerized, as well as a singer 401A for smaller jobs. I make soft playgrounds there. I design and sew all the components that go in the playgrounds. I do believe the older machines are the best working and longest lasting machines, need the least amount of maintenance. The metal working parts last forever including the bobbins.

[@nkha23]

Jade 20 owner right here!!! Bought Stella in May, got rid of my Singer Sewmate 5400, and never looked back. 4 months later my wild a#$ bought a Husqvarna Brilliance 80. Lol

[@markodegaard3551]

Mark - Vancouver. I have a Sailrite LSZ-1 - no button holer, no needle threader, no thread cutter - nothing except straight stitch and zigzag.. It's pretty tough though and a pretty blue colour and sews with big strong needles right through almost anything. My last machine was a Pfaff 1222 which was fantastic - I should have kept it but hindsight is always 150%.

[@verablack3137]

I want a singer model 15, but I am interested mostly in sewing things out of wool, I have a vintage Kenmore right now, but I admit the beautiful and simple appearance of the Singer is a factor in my desire.

[@PatriciaJackson-v6v]

I sew garments for me. My machine is about 40 years old , Janome. Brilliant.

[@amdelorey]

I sew with a Janome Sewist 521. Has a cover and carry handle. Janome Sewist would be great for a beginner but mine has a 4 step button hole. Not sure if the newer ones have one step. I am an experienced sewist and have been sewing for a long time. I love this Janome but am finally looking for a few more bells and whistles. I will keep my Sewist for back up. Next for me, maybe a Janome computerized or the Bernette 38 or 77.

[@ljtilmon]

I just bought a Singer HD6800c last week. I can't tell you the pros and cons because I haven't used it yet. I still use my Singer Imperial Model 7043, which I bought in 1989. I love my Singer Imperial because it's a workhouse. It's never had to be put in a shop for repair; sews the lightest and/or the heaviest fabrics -- including leather and suede. I have as many various presser feet for my Imperial as if it were brand new (which still looks new). The only thing I'm sorry about is that Singer (nor any other manufacturer) didn't make the flowering foot for slant-shank machines.

[@caninecrazy]

Can I just say… i love your energy, your knowledge and the way your objectivity! Totally refreshing!

[@BlueprintDIY]

Thanks so much!! 😁

[@cosmicurjahealing1642]

I’m not a beginner .. I’m trying replace the old 25 years Brother machine, I’m looking for a machine that I can saw a light to medium and heavy fabrics (like leather/ vinyl) Jeans, Zippers, buttons, making holes(4step), bottom stitches for pants that dose not show, needle threader, Not interesting in quilting or embroiled futures, I’m willing to consider computerized sawing machines. Where My budget is between $200-$300 I love your video!

[@marykok6703]

I have a Kenmore, from 1978. Great machine, but seems to be wearing out. Now it will only sew straight and reverse, no zigzag. I used to sew a lot, clothing for both myself and my kids. Now I rarely sew, and newly retired, want to get back into it. Anticipating making some simple clothes and hopefully some simple quilts. I'm in the market for a new machine, and have been overwhelmed by the options out there. This was very helpful in honing in on the options that would be important to me. I appreciate your honest opinions!

[@caroler4297]

I have both a mechanical White machine from 1971,(high school graduation gift) a cheap Brother basic machine, I paid $68.98 for at WW, to my latest a Singer Quantum Stylist 9960. Now I've heard things about that Singer but I just sewed 3 layers of heavy duty canvas and it did not hesitate. I am more of a home decor, alteration, occasional wedding dress sewer. It depends on my mood which machine I turn on. If you are going to pay around $300 check out the Singer on the A online store. Mine came with special accessory package. It would be a good machine for the person like me, the occasional sewer who wants bells and whistles but who has the heavier machine. Singer is now owned by Husqvarna, and is similar to one of that lines higher end machine. I have been sewing for 58 years, so this video is fantastic.

[@philipgunderman7292]

Thank you. This has to be the best unbiased advice anywhere. I am a beginner and have a machine that I am happy with, but would have probably looked for something more basic to start with.

[@BlueprintDIY]

Thanks! I hate when you ask someone about sewing machine and they’re so insistent on one brand just because that’s what they’re grandmother used.

[@pipermoonshine]

I used to bash new sewing machines but as a sewist I matured as I went. Now I firmly believe that there is a purpose for every sewing machine and budget. All sewing machines are good for one thing or another. There are exceptions but for the most part there are some really good new modern sewing machines out there for everybody.

[@EnlightenedFlamingo]

As a total beginner to sewing in any shape, way, form I got the Brother SM1400 for about $60 at Michaels a few years back (& it sat in storage a few years but that's another story). So far I've used it for altering clothes (mostly hemming, hubby & I are both short), as well as masks, sunglass cases, zipper pouches, etc. Nothing big yet, but I do hope to try quilting one day. I like the idea of bells & whistles but I don't wanna depend on a computer. I feel like going the mechanical route, I'll learn more. I have to manually turn the dial to choose from the small handful of stitch options, manually thread the machine, & just like with driving lightly put my foot on the pedal to go slow & pedal to the metal for speed! I'm really enjoying learning, though I'm still nervous every time I do something new. If you wanna see my machine, I have a few pics on my IG. I have no idea if the Brother SM1400 is even still manufactured but I feel like I got a great deal for a beginner! KZbin has been a huge help learning tips & tricks too. This is a great video with excellent points. Thanks for sharing!!!

[@blufaerie]

I have a mechanical Singer 1120 machine that one of my sorors gave me BRAND NEW! It has front loading bobbin, removable arm, needle threader, thread cutter, and a bobbin winder. I think it’s pretty fancy, and it’s my first machine. I’ve made a few things on it, denim, canvas, and woven fabrics and I love it. I do get frustrated with thread tension and the front loading bobbin but it’s great.

[@christhompson3750]

I have a 40 year old Kenmore sewing machine, bought it new. Still going strong to this day.

[@christinamcintyre2253]

First machine is my Singer Stylist 7258. It's a terrific machine especially for a beginner. Love the auto tension, multiple fancy stitches and sews nice with a walking foot. I only paid $190, 6 yrs ago. I've seen them go now for $400!! Pandemic has made people greedy. Cannot handle thick fabric. I also have a Singer heavy duty like she does along with a Brother 1034d serger. I'm now looking to replace and buy a quilting & garment sewing machine. Looking to a minor investment of no more than 2k.

[@rimasmeleshyus9486]

My favorite sewing heavy duty machine 4452 this is my favorite easy to use .

[@micheleharrison5696]

I LOVE your video!! You are asking the questions that I've never thought of asking. I have a New Home/Janome mechanical machine that I got in the early 80s. Unfortunately I didn't use it for a few years and it seized up; I took it in to my local repair shop and they were amazed at its condition. Now I'm starting to get to know it again and was looking to replace it should it ever quit for real. Answer to questions: No I don't need the latest bells and whistles. No I have no desire for needing a computer programming class to use my machine. And yes, I am a tinkerer. I've torn my machine apart to find out what's wrong with it. Thank you for NOT talking down to us, for making us think about what WE would like to have on OUR machine for what we use the machine for. Bless you!

[@BlueprintDIY]

Thanks so much!! 💕 Your machine sounds awesome and absolutely perfect for you!

[@hopegilbert5899]

I too have a New Home Janome, and I 💘 it! As a quilter, it is strong, and consistent. This machine is brave enough to tolerate my way of stitching! I'm considering a new machine, more to upgrade than to replace. I need an extension table, a big one.

[@pamelaferguson7766]

I've had a few machines. My mom bought me a Brother machine that had cans you inserted to make different stitches. Quite advanced 45 years ago. I never learned to use it. Then I bought myself a Sears, which I sewed quite a few outfits for my 2 oldest granddaughters. Then, i sewed that, and bought myself a Baby Lock embroidery machine. I loved this machine and I still use it to sew light to medium weight fabrics. I then bought a Singer serger, and a Singer heavyweight. The serger i really enjoyed. The heavyweight never worked right. It is presently boxed up waiting for the thrift store. Right before i retired, I bought a refurbished Brother heavyweight and a Juki serger. I got sick right after i bought them and never even set them up. I really miss sewing and hopefully will get back to it soon.

[@laurasomeofthesethoughtsar5811]

I just got a Smarter 260c by Pfaff. It was AU$499, just in my budget and it is electronic with 1 step button hole. It will do 2 layers of denim easily and 4 with a grumble. I found this video SO helpful in my journey to get my 1st machine in 18 years. Thank you.

[@gemmamoraleda5341]

This is the first "guide buy" video I've ever watched that actually helped me lol

[@islandgin8635]

I have a older Kenmore 385 and Love it.

[@couragejusticewisdomtemper4977]

Here is an answer for your request to find a great sewing machine that has an automated stitch for a keyhole buttonhole. It’s the Janome 3160QDC Computerized Sewing Machine (New 2020 Tan Color) w/Hard Cover + Extension Table + Quilt Kit + 1/4 Seam Foot w/Guide + Overedge Foot + Zig Zag Foot + Buttonhole Foot + More! Hallelujah! Hope you can try it. Thanks for your channel. Love it!

[@deniseluper2647]

I have a 40 year old Kenmore I won’t part with but as a quilter I need more throat space and some bells. It’s ok to upgrade and add to the repertoire. My Janome MC4400 is a great little machine, but again, I’m ready for some automatic needle up/down and throat space, and won’t part with it either. Haha. Thank you for the informative video.

[@chrisfrancis7925]

Thanks for the video I'm about to up grade my machine this has really helped now feel I can focus on what I need and not waste time and money getting what I don't need feeling disappointed so thank you

[@soneil7745]

I only got into sewing because I like playing with vintage machines. It seems like a lot of people I know have them in back corners of houses gathering dust. Eventually, I decided I wanted to go beyond mending and making potholders. I don't know what my sewing goals are, but I just wanted to be able to actually create instead of just repair things. Right now, I'm sewing on a White Rotary from somewhere between the 30s and 40s (probably). It's a straight-stitch only machine, but it does have reverse. It's just like the one my great-grandmother had, and I spent more on gas for the 90-miles-each-way drive to pick it up from the Craigslist seller. I love these older machines because they're so pretty (I also wouldn't want a machine I don't like looking at) and they can handle almost anything you shove under the presser foot. And you are definitely right about having a one-step buttonhole. I got a mechanical buttonholer attachment that screws onto the presser bar. I've had an easier time doing without zigzag stitching than doing without buttonholes.

[@flynnmalin]

Hi, Angelina, Singer Simple is my go-to sewing machine. I will ONLY use a bottom bobbin sewing machine. It is soooo much easier to use and clean. $120 at Joann's.

[@michelenaomi3031]

I am in the market to buy a new sewing machine, this video came right on time. thank you!!!

[@luis-sq8cp]

I have a juki industrial DDL-8700 I sew gowns and custom tailored clothing. the pros of an industrial sewing machine is the power the machine has. It can go really fast or really slow and you can work for hours everyday. another pro is its self oiling so you can go into sewing quick. another pro is that it comes on a table so you sew on a flat surface making it easier. The cons are that its only limited to one stick and it comes in a table and its hard to move anywhere

[@nancylnichols]

I'm 70 years old, I started sewing when I was 13. I've worked in sewing factories making everything from hemming towels, bras, jeans & baby clothes & windscreens. I only own vintage machines. I own several machines, I'm going to downsize, I will only be keeping my Morse (Toyota) & New Home (made by Janome) They are workhorses. I have a Kenmore that's fairly good & 2 Singer Touch n Sew that have plastic gears that's definitely going.

[@nopsketchbook]

I have a Singer Simple™ 3223Y (yellow) but I am trying to upgrade right now. for five years, I have been using mostly straight stitch to make stuffed animals with not very difficult fabrics. I was scared of it for a long time. I still don't fully understand the tension on this machine. then again, Im not super great at doing tests so I jump into it and hope I don't drown. I end up with a lot of .. wonky items because I also never use patterns and kind of frankenstein things together but its part of my process and ultimately if I wanted a perfectly manufactured piece id go buy one. I've been continuously learning to use this machine for the past five years and just as I get the hang of it I start to think I should upgrade because my skill level is getting better.. I love my machine. it has never done me wrong. if something isn't right I know its user error. I try to be nice to her and not get frustrated. for the price I think the simple is a great machine for someone scared of sewing machines. its intimidating. even with amazing tutorials like this channel, its daunting. this machine can teach basics and is a reasonable investment for someone that doesn't use it all the time. i think it would be a great machine for kids. so I am going to gift her to a friends kid to learn on and for myself, upgrade to ... well I have to watch the rest of the video.

[@patricia4817]

My first machine was a portable Singer many years ago, which took me a long way. I currently own a Husqvarna Viking 690Q, Husqvarna Viking Designer Diamond Deluxe, Singer Merritlock 14U44 and a Sailrite Fabricator because I sew with all fabrics from silk, cotton, denim, leather and faux fur. I prefer a computerized machine with all the bells and whistles for regular sewing and the 690Q is great but not with leather. The Designer Diamond Deluxe is my embroidery machine that I love and regular sewing is even better than the 690Q, but I save it for embroidery. The Merritlock is an old serger that works great. Changing the blade made it a new machine for $12. My Fabricator is my new BFF, that's a beast, making my leather clutches. Just be willing to take time to learn your new machine by making mistakes and learning from them.

[@BlueprintDIY]

Your collection sounds amazing!! Great tip about buying a new server blade!

[@dequanalexander6373]

Thanks for the information it was very helpful Which machine do you prefer for thinner fabrics like silk?

[@sapphirecamui6447]

As a beginner, i bought this Veritas Janis machine: it has everything preset when it comes to stitch length and width. Makes things easier because you don't have to measure or think too much about which stitch to choose. All you do is test a bit before you start your project and go. It has 2 or 3 decorative stitches as well (though i think all of them can be used as decorative.). I got it because it said it can sew through thick fabrics. thick fabrics apparently =/= many layers too, ooops. I recommend this machine if you're a sewing (machine) beginner because it's an inexpensive one, and allows you to figure out if you like sewing or not. Also pretty good for occasional sewing. It's a bit too fast for a beginner, but when you have no idea how long a seam can take to be completed (say even an hour), speed is something you'll want. Then i got myself a vintage Dorina machine where i have to adjust stitch length or width. It also does stretch stitches - so i find this one a bit more advanced, though it's older. I just discovered that for the buttonhole option, i have to lower my stitch width. and i was saying that its buttonholes suck, when it was me who had no idea how to operate it for this function ;p oops. I use my machines for making clothes as well as other items (aprons, face masks, fabric shopping bags, pillow cases). I even made curtains. the hemming process was a killer. :(

[@Lexi-vp5kk]

This is SO helpful. I'll be sewing three layers, two layers of fleece and one of the absorbent fabrics called Zorb. Doing a ton of research. (Also the basics are in the description I noticed, helpful for me since I have trouble hearing.)

[@BlueprintDIY]

I'm so glad it was helpful! 💕

[@mailynrosario6967]

Lexi Moody what did you end up buying? And where did you find zorb? Thanks. This video for machines option is excellent.

[@skeltax3790]

I have a singer heavy duty, like yourself, but I'm on the market for a new one as I don't like it at all. I mostly sew garments, mostly from cotton to denim. While the machine is fast, it is also incredibly unstable. It vibrates like it's about to take off, to the extent that the machine starts horizontal and will end at a 45 degree angle in front of me. It's also incredibly loud. You will not be having a calming sewing experience on the machine! I've worked with industrial sewing machines in the past and I adore them, I plan to get a Juki DDL 8700 when I finally have the space for it.

[@BlueprintDIY]

I tried a Singer serger that shook really bad. That Juki industrial is going to be nice to sew on!