I like the stubby dark green propane tanks. The torch is less likely to tip over. I think they're designed for camping, but they work very well for torches. 🐀🐾
@kosycat12 жыл бұрын
I'm just here to take dabs safely
@cutestshorts1013 ай бұрын
I'm here to heat up my butane vaporizer
@54DontTripАй бұрын
I’m deaddd 😂😂
@samuelprod17 күн бұрын
sameeee
@freeelectron82613 жыл бұрын
He must be hot in all that safety gear! Looks like he's ready for a big smelting furnace!
@heidibacklund32103 жыл бұрын
hotter than my bernzomatic gets
@suche1149 ай бұрын
awesome explanation,
@michaelavoller59952 жыл бұрын
love this guy to funny 😂😂😁
@parmorama3 жыл бұрын
Great stuff ..thank you 👍
@GreggDistributorsLP3 жыл бұрын
We're glad you enjoyed it! Thanks for watching and stopping by our Canadian channel
@rayanator1052 жыл бұрын
Does MAP-PRO without oxygen reach high enough temperatures to melt small quantities of sand mixed with the other ingredients of glass? As I've purchased a Peri (a well established New Zealand company ) Super-Map torch kit and want to do some experiments over summer in a mini-crucible made from alumina-silica refractory bricks after I've repaired the wheelbarrow.
@GreggDistributorsLP2 жыл бұрын
Considering the melting point of sand is approximately 1700°C (3090°F), MAP-Pro fuel has an in-air flame temperature of 3,730°F which means that theoretically, it should be enough heat for you to melt the sand without the oxygen cylinder. Thanks for watching! More info here > greggdistributors.ca/search?q=I64&page_size=8&view=list&terms=CatPage:I64
@SocratesDionisius3 ай бұрын
Does ultra gas MAPP make dash inside the pipe ?
@GreggDistributorsLP3 ай бұрын
We're not quite sure what you mean by dash, could you be more specific on the application?
@SocratesDionisius3 ай бұрын
@@GreggDistributorsLP sorry, dust.. black thing inside the copper pipe when we dont use proper amount of nitrogen to braze
@irenegarcia30993 жыл бұрын
do you think that the basil pencil flametorch might also work in wood finishing? also, where do i store my blowtorch if i live in an aparment.
@GreggDistributorsLP3 жыл бұрын
We would recommend using the TS3500 or the TS4000 as Bernzomatic lists Woodworking as an application for these models. While the Pencil torch is intended for metals and has to be lit with a sparker. For more info, please check out our website > greggdistributors.ca/Welding/torches-and-accessories/new-welding-torch-accessories/iiits3500kc
@abibodlogistics Жыл бұрын
Is it possible to swap the tips of these torches or they are permanent.
@GreggDistributorsLP Жыл бұрын
The torch head is replaceable. Check out some available options. greggdistributors.ca/search?q=bernzomatic&resp_group=Default,Variations,ItemProperties
@rayanator1052 жыл бұрын
Is MAP-PRO by itself okay for brazing thin sheet steel?
@GreggDistributorsLP2 жыл бұрын
The MAP-Pro fuel cylinder is ideal for medium to heavy soldering and brazing, so you should be okay to braze thin sheet steel. Thanks for watching!
@rayanator1052 жыл бұрын
@@GreggDistributorsLP Thanks for the information. Much appreciated.
@unknowperson9 ай бұрын
Very good info, thank you.
@johnboyjr213 жыл бұрын
"Dale" Okay Ranjeet.. Just jokes hahaha thanks for the vid y'all!
@GreggDistributorsLP3 жыл бұрын
Thank you for supporting our Canadian channel, we're glad you enjoyed it! Stay safe and stay tuned for more to come!
@nelnolan84343 жыл бұрын
Let's support his Canadian chanel mate. Haha
@johnboyjr213 жыл бұрын
@@nelnolan8434 What's the other one tho lmao
@itsme-fr5fr3 жыл бұрын
Sense your a Canadian that must have been a vegemite sandwich 🤔 ... wait no that would be another subject of the 👑 Australia , the land down under. Sorry for the mix up there 😬!
@elcompatony55203 жыл бұрын
Who else trying to find a torch for the beach lmao
@PhD_Dad4 ай бұрын
Wait 5 minutes…hahaha…
@MakeWay4CJ2 жыл бұрын
This video was VERY well done! I mean, you answered questions that I keep asking people but kept getting vague answers. Thanks for taking the time to shoot and upload this!
@grishg95362 жыл бұрын
"Keeping it away from your face...." Thanks bro. You saved my life and that of my friends.
@sunnyormsby84023 ай бұрын
Thanks. I found out the Benzomatic, won't work lower than 60 degrees, in other word's; when I point it down to the work ,out goes out?
@fluffchucker132 жыл бұрын
Excellent well made video, many thanks … and why can’t we get them in the U.K. under £200 What’s the reason for the hole in the handle, is it an over pressure safety reason? There’s a lot of warnings as people have got badly burnt
@alienlatino29452 жыл бұрын
At 3:37 you told me the answer I came here to KZbin for, thanks! The sad part is that I threw my torch in the garbage because I thought the nozzle had failed permanently, all I had to do was wait 5 mins eh? Unbelievable how a nozzle with no electronics shuts off and refuses to open when you have spent more than 20 seconds trying to ignite the torch but the wind won't let you.
@coreelite7 күн бұрын
What happened your quality? All the riches and fuel I have bought in the last two years is crap. Crap finish and the fuel is contaminated.
@ARYANSES2 жыл бұрын
Hi Gregg , I have two Bernz0matic TS400 that somehow I lost the nozzle for both of them any idea where to find a replacement ? Thank you
@GreggDistributorsLP2 жыл бұрын
You can find them here > greggdistributors.ca/Welding/torches-and-accessories/new-welding-torch-accessories/iiits4000t
@davidleslie949Ай бұрын
MAPP He's actually no longer produced. It's the same exact fuel as a propane blue cylinder the company that bought out the producer of mapp cylinder field fuel sources simply kept the name so as to not lose any existing customers, but has been feeling the same yellow cylinders that were originally a map fuel with propane. Propane is just one fractional distillation process away from butane any of the propane torch in this ad in this video can you utilize butane in the same manner as they would propane I've used both back for whichever I have in hand with no difference other than a couple hundred degrees, Fahrenheit or so
@garrett-adamsltd2503 жыл бұрын
Which is the best torch to use to char wood for a shou sugi ban effect?
@isidoreaerys87453 жыл бұрын
There’s an R in the name? I always thought they were an aromatic solvents company or something
@Tifford1 Жыл бұрын
Are any of these hot enough for loosing rusty exhaust bolts. I have to replace the exhaust system on my truck this summer
@Wayne_C_Kelly_II3 жыл бұрын
Which Torch Do You Recommend, To Remove Old Stubborn Vinyl Tiles, From A Concrete Basement? I Am Search For Extreme Heat.
@culiacansinaloa34323 жыл бұрын
Can use the nozzle on the yellow cylinder, with propane cylinders?
@nsxproperties5603 жыл бұрын
If you use a TS8000 torch head in a propane torch, will you get more heat than using a standard TS3500 that comes with a propane torch?
@GreggDistributorsLP3 жыл бұрын
The TS8000 does achieve higher heat output due to the swirl flame design, so yes, if you use this torch head you will get more heat output.
@BobRooney2903 жыл бұрын
had to pause the video when you made the hotdog. made me hungry!
@claudioagmfilho2 жыл бұрын
🇧🇷🇧🇷🇧🇷🇧🇷👏🏻, Awesome video thanks for sharing it!
@GreggDistributorsLP2 жыл бұрын
Thanks for watching!
@piping20245 ай бұрын
🙏🙏
@jabbaweezy3 жыл бұрын
Thank you for sharing your knowledge
@GreggDistributorsLP3 жыл бұрын
Thanks for watching and supporting our Canadian channel, stay tuned for more to come!
@akongas3 жыл бұрын
Two questions: the first, I'm primarily wanting to solder pieces of 9 gauge copper wire together for sculpture, what would you recommend? Secondary, do these torches have any safety features that stop the bottles blowing up if something goes wrong? Thanks
@digidwarp67042 жыл бұрын
Haha no
@eagle15102 жыл бұрын
Thanks for the video. Since Aluminum metal melts at 660 degrees C (1220 degrees F) and a propane flame heats to 1898 deg C., can you melt aluminum directly with propane (or MAP-pro) without an aluminum brazing rod?
@DreidMusicalX Жыл бұрын
Which is best for melting ounces of silver and gold in a crucible?
@quintinwaterhouse58042 жыл бұрын
Doesn’t get it to light for a second gotta wait 5 minutes lol benzomatic would call you nuts
@1dashcamboatsandcars3 жыл бұрын
Nice video/demo
@GreggDistributorsLP3 жыл бұрын
Glad you enjoyed it, thanks for watching!
@simonbertioli46962 жыл бұрын
I have a question.. I am intending to convert some old large bird cages into cat cages. The cages are made of wire small guage..and l presume that they were originally spot welded.. If l can convert them into cat cages, then simply braze the items together. Q, which torch would be most suitable..it's not heavy material in any sense. I would use MAPP gas Many thanks 😊
@bosesebi66852 жыл бұрын
use butane, sparsely.
@moitoi40643 жыл бұрын
Hi, thanks for the video. Can you pls. tell me what’s the nozzle diameter of the first torch.
@GreggDistributorsLP3 жыл бұрын
The TS8000 nozzle diameter is about 1/2" > greggdistributors.ca/Welding/torches-and-accessories/new-welding-torch-accessories/iiits8000bt
@frankjames19553 жыл бұрын
at last he didnt spend 2 hours on safety gear hahaha
@JoeCrane-t8k7 ай бұрын
Is there there any difference on the tip from the blue tank to the yellow tank
@GreggDistributorsLP7 ай бұрын
The threaded tops on the blue and yellow cylinders are the same.
@Crystal__Clear2 ай бұрын
Thanks Greg
@trevorjames54932 жыл бұрын
Can I bronze braze with the handheld micro torch if I leave the flame on long enough?
@GreggDistributorsLP2 жыл бұрын
This depends on the metallurgy of the bronze you are working with. Typically bronze has a melting point of around 913 degrees Celsius. That said, the butane in your micro torch can burn up to 1,760 degrees Celsius, but a micro torch with a small flame will have a tough time getting to the required temperature with external environmental factors impacting the flame. Your best bet to get the required temperature would be to invest in a larger torch kit such as this one: greggdistributors.ca/Welding/torches-and-accessories/new-welding-torch-kits/ultuf4921
@yorkrojas1452 Жыл бұрын
Wow, thanks Buddy!!
@misterjameswest2 жыл бұрын
Great information! Many thanks!!
@lfm3585 Жыл бұрын
bro didn't tell us what temperature red can burns at
@GreggDistributorsLP Жыл бұрын
The red cylinder is Oxygen, and is often mixed with a max power propylene (yellow cylinder) to create a higher temperature. For more information check out the product here. greggdistributors.ca/Welding/torches-and-accessories/new-welding-torch-accessories/ultuf4943
@marcostudd2 жыл бұрын
Trigger start torch can also be used with the blue can, correct?
@GreggDistributorsLP2 жыл бұрын
Yes, that is correct. Thank you for Watching!
@geraldcamporaso21542 жыл бұрын
How much
@Marcin79W2 жыл бұрын
Thank you.
@armandocalvillo22663 жыл бұрын
For the brazing torch kit can i used with out oxygen
@GreggDistributorsLP3 жыл бұрын
In order to be effective, the brazing torch kit does require the red oxygen cylinder combined with other fuels to produce that high intensity flame that's required for the job. For more information about this product, please visit our website > greggdistributors.ca/Welding/torches-and-accessories/new-welding-torch-kits/iiiwk5500
@ultrablue23 жыл бұрын
Thank you. A good, informative video.
@GreggDistributorsLP3 жыл бұрын
Glad you enjoyed it and thank you for supporting our Canadian Channel! Stay tuned for more to come!
@paralellosll38492 жыл бұрын
Are these little propane bottles refillable?
@GreggDistributorsLP2 жыл бұрын
Unfortunately these bottles are not refillable. Thanks for watching!
@Stormysummerz2 жыл бұрын
Why remove the torch from the cyl
@GreggDistributorsLP2 жыл бұрын
The contents of the cylinder can leak out, leaving you with an empty bottle.
@m.webber5118 Жыл бұрын
Typically how long Will a cylinder last?
@GreggDistributorsLP Жыл бұрын
It will vary depending on how high you have it set to.
@m.webber5118 Жыл бұрын
@@GreggDistributorsLP A range would help, 2 to 4 min’s, 10 to 15 min’s or 20 to 40 hours? I don’t have ANY, experience with these.
@charlottewest72803 жыл бұрын
What torch would you recommend that is far reaching and powerful? Like for aiming at a predator to scare away or for a wasp nest?
@GreggDistributorsLP3 жыл бұрын
We would recommend using the Brazing Torch Kit. For more information about this product, please visit our website > greggdistributors.ca/Welding/torches-and-accessories/new-welding-torch-kits/iiiwk5500
@Oogabooga-3 жыл бұрын
Using a torch for a predator sounds like a terrible idea
@charlottewest72803 жыл бұрын
@@Oogabooga- why would it be a terrible idea? Animals are fearful of fire(all animals)!
@bosesebi66852 жыл бұрын
@@charlottewest7280 Imagine trying to light it...
@robertrosenberg6354 Жыл бұрын
fkn asshole questions
@christinabeita56713 жыл бұрын
Does it cut iron?
@GreggDistributorsLP3 жыл бұрын
The Bernzomatic Brazing Torch Kits are ideal for light welding, brazing, and cutting thin metals only. For more info, please check out our website > greggdistributors.ca/search?q=I64&page_size=8&view=list&terms=CatPage:I64