That you for making this video Mr. Mark much appreciated. Keep these awesome videos coming 👍🏽
@marksfishingchannel99234 жыл бұрын
Thanks David
@benberry7034 жыл бұрын
Great video Mark, and keep these great videos coming. Great lesson on how to clean that Concept Z👍
@marksfishingchannel99234 жыл бұрын
Thanks Benjamin
@mickeyweeks2275 Жыл бұрын
Awesome video, very informative. Going to give this a shot on a couple. Thank you!
@mickeyweeks2275 Жыл бұрын
Finished it up. Feels brand new! Thanks again
@JonBoatJared3 жыл бұрын
Great video. My concept z has been grinding a bit so nice to see a video of how to clean it up real nice
@marksfishingchannel99233 жыл бұрын
Thanks
@jigginjed74984 жыл бұрын
That video really helped me. Thank you!
@marksfishingchannel99234 жыл бұрын
Glad it helped!
@jhmxl12003 жыл бұрын
Thank you for making this video! Got my Inception SZ a few months ago and been fishing a lot of slop when I noticed the drag wasn't engaging really well. This video helped me get things working again. Now I know how to keep it clean and working like it supposed to.
@marksfishingchannel99233 жыл бұрын
Glad it helped!
@mattfryar51714 жыл бұрын
Good video Mark. I bought my Son this reel last Christmas and still haven’t taken it apart yet. Will do it soon
@marksfishingchannel99234 жыл бұрын
Thanks
@marcusguajrdo73 Жыл бұрын
Great vid
@brucemoyers10063 жыл бұрын
I'm tearing one down for my bud. 4 years old, salt trips dozens of times (no immersions). NO sign of corrosion anywhere. I use SPEED X from U.S. Corrosion Tech. Inc. Micro drop on the inner surface of bearings. Can't wait to see how it casts. Great vid my friend.
@marksfishingchannel99233 жыл бұрын
Thanks
@Xjr5rjX4 жыл бұрын
Thank you for this!
@marksfishingchannel99234 жыл бұрын
You are welcome
@derekbushnell13094 жыл бұрын
Yep. Much appreciated.
@marksfishingchannel99234 жыл бұрын
Thanks Derek
@dannyd-rockmahaffey30874 жыл бұрын
WOW....I would of never got that back together....lol....great video
@marksfishingchannel99234 жыл бұрын
Thanks Danny , I bet you could lol .
@dannyd-rockmahaffey30874 жыл бұрын
@@marksfishingchannel9923 Brother, I am seriously a big fan...Love what you do...Thank you so much for your videos
@chebumafu3 жыл бұрын
Gangster!🤙
@kushjr420143 жыл бұрын
Can you do a video on how to completely remove all hardware from Concept Z bait caster need to repair mines and replace the. Frame which includes all hardware being transferred to new frame, if possible i would truly appreciate it thanks for your time Mark I enjoy your videos
@vincemaldonado10893 жыл бұрын
Mr Mark, very informative. Much appreciated. I'm about to open mine up for cleaning. How would one know what parts to grease and what parts to lubricate? Thanks!
@marksfishingchannel99233 жыл бұрын
Thanks I put a light coat of grease on the drag parts and the gears and put oil on the other parts its up to you if you want to lube the bearings or not on the Z I have not been but next time I will just to see the difference it makes
@jbthunder14754 жыл бұрын
Mark could you please show a close up of what the washers look like when you say miss matched in the video it's when you put the star drag assembly back together getting ready to take mine apart thank you for the great vids
@marksfishingchannel99234 жыл бұрын
I don't know how to show you but you will see what I am talking about when you take it a part even if you put it different then you took it off it would still work I have done it and did not know it till the next time I cleaned it .
@jimmywaynejohnson27354 жыл бұрын
Braver than i am stripping your reel down and putting it back together with other parts laying there! There's no telling what menagerie i would end up with LOL!
@marksfishingchannel99234 жыл бұрын
LOL I have cleaned the other one a lot so my learning carve was smaller .
@larrym46382 жыл бұрын
Thanks for video, question on my Z it does chatter when casting since I own 2 I swap out the spools and it stop chattering, so do you think the bearings are bad on spool , or maybe the spool shaft is bent ?
@marksfishingchannel99232 жыл бұрын
You can swap the bearing and see if it is the bearing , may be put some light oil on them if you did not already
@juanbatista34973 жыл бұрын
Hi mark ! I see the you been having the 13 fishing z a little over a year, I was just wondering how it’s been holding up, do to the fact I just purchased one a couple of days ago. Please let me know and thank you.
@marksfishingchannel99233 жыл бұрын
Mine was good except for the aluminum main gear did start to pit sooner then it should have . I had them send me a brass main gear and a pinion gear and now I think it will last a long time .
@jordann28353 жыл бұрын
Hey mark, I just bought a concept Z and I noticed the handle doesn't spin all that smooth, I'll also probably have to tighten down the handle since it seems loose, it's brand new however, what should I do?
@marksfishingchannel99233 жыл бұрын
I would send it back if I could and get a Shimano Curado K . I love mine and have enough time fishing with it to say It will hold up for a long time . but if you picked up the Z cheap it is a good reel as well and I do love the break system but I had to replace the aluminum main gear I went with a brass replacement and it will hold up for a long time now .
@Dayyb0t4 жыл бұрын
I have the Z and I had that same issue with the main gear chipping. Eventually it sheered off to the point where it could not engage with the pinion. Like u said..$13 dollars for a replacement. Still a bummer tho. My Shimano gears don’t have those issues. The quality metal they use for that gear is not very strong.
@marksfishingchannel99234 жыл бұрын
Thanks David for the info now I know its nots just me .
@chrisrittenburg17192 жыл бұрын
The first nut on the drive shaft ( reverse nut). You hand tightened. Should it be torqued, or just hand tight?
@marksfishingchannel99232 жыл бұрын
Can be torqued a little
@chrisrittenburg17192 жыл бұрын
@@marksfishingchannel9923 Thank you
@Purpill4 жыл бұрын
How often should we clean and grease reel? Just bought one
@marksfishingchannel99234 жыл бұрын
it all depends on how many times you go out and if you get a lot of sand and dirt on it for sure clean it when it start to feel different . I clean mine about I time a month . sometime a little less .
@jtowers67224 жыл бұрын
Lost that little spring and dibbit thing, where could I buy those two parts?
@marksfishingchannel99234 жыл бұрын
I lost them on my A and it still works fine you might get them from their website you can send them a email .
@chaiher96863 жыл бұрын
i can pull line out of my concept z even though my spool is not open and spool is not taking in line but i can crank my handle (spool not spinning) can ya help me out?
@marksfishingchannel99233 жыл бұрын
The star drag may be too lose . if it is tight then you may need to clean the reel like in the video . check the main gear for teeth missing .
@turningthehandle24753 жыл бұрын
Any idea why this reel is screaming on the cast? Just serviced fully broken down please help.
@marksfishingchannel99233 жыл бұрын
It usually comes down to either dry bearings are worn out bearings so make sure to put Hey drop or 2 of oil on the bearings and try that I know you said you just serviced it sometimes I don't put oil on the bearings make it cast further but if it shatters you may have to add a little oil
@clr8813 жыл бұрын
On my z the tension knob doesn’t click and more. I’m pretty much thumbing everything and it’s hell with wind. Is there anyway i can fix it
@marksfishingchannel99233 жыл бұрын
You may can take the cap off and pull the little c clip and pull the parts out and clean it if I remember right it has two tiny springs and two little dibits It is not that easy but it can be done .
@clr8813 жыл бұрын
@@marksfishingchannel9923 thank for the reply
@TheDarkMajin_3 жыл бұрын
quick question the nut you mention backwards thread it won’t go! do you k ow what when wrong? does it matter ?
@marksfishingchannel99233 жыл бұрын
If yours is a right hand reel it may be right hand threads .
@marksfishingchannel99233 жыл бұрын
I just watched the video back it been a long time so it is the drag nut sometimes I have to put the star drag and the handle back on and loosen it all the way up then take the handle off and then it will come off . It may be if the nut wont move the salt may have got to it and electrolysis set in it is aluminum and the part it is screwed on is brass sometimes that will happen .
@TheDarkMajin_3 жыл бұрын
@@marksfishingchannel9923 Yes is right hand, Thank you for the response.
@jaces99010 ай бұрын
After pushing release the release won't pop back up on own any longer
@TheDarkMajin_3 жыл бұрын
quick question my concept Z Drag doesn’t click what did a miss?
@marksfishingchannel99233 жыл бұрын
The tiny dibit is what I call it in the video you may have to watch it back I talked about it close to the end . but don't worry if you lost it I did on one of mine and it still works fine . the star drag will not move . on its own .
@TheDarkMajin_3 жыл бұрын
@@marksfishingchannel9923 i watched a few times but i tough you were referring to the tiny spring which that’s the one i was keeping up with! dang it i drop the ball lol, Thank you again
@arifcaster Жыл бұрын
Hai i want buy main gear bc reel concept z2 ratio 8.3.1 .. i from malaysia
@jaces99010 ай бұрын
Put back together only goes backwards
@marksfishingchannel992310 ай бұрын
you put the Anti reverse bearing in backwards the one I talked about at 10:58 in the video just turn it around and it should work right .
@RyanSmith-fb8rf9 ай бұрын
That spring for the clicking drag is pretty weak by 13 fishing. Not a fan of the design