How to clean your ebike in about 15 minutes using cheap items

Here are the items used. This kit will last a long time and is the most cost effective way of keeping your bike clean, lubed and in good condition.
Please try to support your local bike shop by buying the products there, most of them will be available, if you need to shop online here are the products.
All in, the cleaning products will cost about £60ish (if you get the big 5 Litre cleaner), but will probably give you years of bike cleaning (the 5 litre makes 55 litres, thats good for a couple of years!!). You really don't need anything more for cleaning!
Fenwicks Bike Cleaner: bit.ly/2TRVAM6 - Available from 1L upwards, remember it dilutes down 10-1! If you are in the USA Simple Green is a good alternative
Park Tool Chain Cleaner: fave.co/2SPOMyi Just brilliant
Car Shampoo: Anything cheap without wax will do!
GT85: bit.ly/2SVcOIi Every bike shop will stock this (I prefer to WD40 for bikes)
Brushes: Go to a hardware store and buy soft washing up/scrubbing brushes for less than £1
Cheap Bike Stand: bit.ly/2VTasLO (not the best but it'll do on a budget!)
Lube: Just use your favourite bike lube, I've been using this: bit.ly/2Frcr55
Silicone Lubricant: amzn.to/2ANnPEC

[@RobRidesEMTB]

Nothing quite like jumping on a squeaky clean fresh bike that’s ready to smash up the trails is there? Hope you’re all good, let me know your cleaning tips below 👊

[@robertmrivera]

any attention needed for rear shock?

[@TheLastMoccasin]

5 years later, do you still use these same products? Would love a "cleaners & lubes" 2024 edition video :)

[@user-ot2qg8np8y]

This is the best “how to clean your EMTB” KZbin tutorial I’ve seen that avoids promoting named brands. Well done Rob! I get all of my cleaning utensils and consumables from either my local motor factors (degreaser etc) and one pound shop. When Aldi and Libl put on one of their bike specials (GT85 and lube) I grab a bargain along with my regular shop and save myself a truck load of money.

[@tonycostello73]

Love your work. I'm new to EMTB's and find your info very helpful on here and the forum .Its thanks to people like you I'm confident enough to take a punt and have now ordered one Many thanks.

[@SenderoSeeker]

Wow Rob, that allen key in the chainring is awesome. Up until now it's been a real struggle, manually feeding the chain through. Absolute gold! 👏

[@RobRidesEMTB]

Makes it much easier!

[@SenderoSeeker]

🤘

[@damienm8416]

This is probably the first bike cleaning vid i have seen where someone doesn't use a brush on the frame , well done . Another option for the casette would be painting brushes from your local hardware store they have longer bristles and maybe an old toothbrush for the chain and jokeywheels .

[@mtbboy1993]

using a brush ca damage the paint if you scrape the sand,dirt,rocks off, bad idea, that's why you let the cleaner do it's job, and carefully rinsing it off, only using brush where necessary, I got protective stickers on from All mountain style, so for those areas I can just brush it off if I want to. but my bike gets scraped off by the gravel and stand that on the icy,snowy bike paths in addition to me riding on gravel paths, ski tracks, and trough rough terrain and roads, so protecting paint with vinyl wrap is a good idea, and all mountain style of high risk areas, like top tube, down tube, for chain stays, seat stays.

[@RickyG225]

Well done Rob! Quick cleaning. I have problems with getting my chain grease free before I re-lube it. I use the Finish Line chain cleaner and some WD-40 and it still has a residue. Also clean jockey wheels, etc, seems like there is residue lingering somewhere I cannot see. Cheers Rob!

[@mtbboy1993]

2:50 I recommend Finish line Grunge brush instead, it's much faster & easier to use, also bristles last a long time, I got spare set but not used it yet, been using it for years.

[@simonmckean5495]

Great Vid....just picked up my new ebike and have been hammering it.....cached in mud just the way it should be....after a wash down i pulled out the stihl petrol blower which worked a treat on getting the water out afterwards.

[@2nuckinfuts]

Perfect timing, was looking for a bike cleaning video 👍

[@calderdash9975]

Thanks for the heads up on e-bike cleaning, grateful for the info and tips.

[@seattlevkk]

Great video and I love your channel - I’ve learnt everything about e-bikes. The only negative is that now I HAVE to get an e-bike and I primarily blame you for that. I remember seeing somewhere to keep degreaser off the brake pads or they get ruined so I have a product that Velcro’s around the rotors and brakes to keep them from getting that on. Also I first bounce the bike on the ground then also use a leaf blower to get water off before wiping it down. That is on my regular stumpjumper.

[@lonniepee9804]

I scored!!! I had just watched EMBN's two videos on cleaning and was looking for one just like yours. I was sure there had to be more economical product lines compared to Muc-Off. I have yet to clean my ebike. I just got it at the beginning of December ('22) and since I only commute on pavement, it isn't very dirty. Thanks

[@flatslide3250]

I cut a disc from a 0.8mm plastic sheet that I slide between the rear rotor and spokes to protect the brake from overspray etc when cleaning my drivetrain.

[@nickturner4150]

Good vid. I found an old flathead screwdriver held up against the jockey wheels as you rotate the chain scrapes off so much horror so precisely, quickly too. I do it first thing after every winter ride out. It's satisfying to look at all the greasy black crud coming away. Keep the driver in me bucket with the rest of the cleaning gear. boom!

[@Xanavi23]

Great video with a lot of really useful advice. I'm also a bit obsessed with my tyres, having ridden too many times over dog crap on the trails I regularly use. I therefore include a routine for cleaning the tyre treads, which on my 2016 Turbo Levo with 3" wide 6Fattie boots can be a bit of challenge!

[@mikee8244]

You haven't lived until you've had to deal with a rear linkage full of dog shit. Grim.

[@Xanavi23]

@@mikee8244 Thankfully that's a problem I've not had to deal with thus far.

[@Po.2013]

i love how u use old mucoff and fill it with better and cheper shampo :D

[@cribs4551]

Many thanks for that! Best thing I’ve bought was a pet dyer. I got mine in pink for half the price 🙈

[@RobRidesEMTB]

Ha! Might look at one of those.

[@robertshaw2602]

Thanks for the video Rob as I did get some good tips. I'm waiting for a Dillinger street legal kit which I will install on a BMC alpinechallange AC02 to take the edge of some hill climbs around home in Melbourne's east. Many videos warn about getting the e-bike wet and this is my only concern as I also ride in all weather conditions. Seeing your video has eased my concerns. I clean my bike after most rides and have a carbon drive system which avoids a lot of maintenance. The belt and sprockets are easy to wash and require no lubricant. I have been using dishwashing detergent so will stop this and get car wash. I also will get some silicone spray as well. Nothing better for me than a long ride on a clean well maintained bike to re-set all of your worries and extremely excited to soon have my first E-Bike!

[@callumhaynes1384]

Cheers Rob, just got my first emtb, very helpful :)

[@lawrencelucero8487]

Well done. Quick and easy and frugal

[@rikaustin5944]

I live in a 5th floor flat and my Levo gets a clean once a month 😂 sometimes clean it at work when I have a chance

[@simonatkinson6911]

I use a small Makita Blower to dry the bike before lubing it ... works a treat. Only about £50.

[@jessicaschafer3906]

Useful video. Would love more close up shots and more details, though, for each of the steps. How long do the brushes typically last you - do you buy a new one each time? My brushes get pretty dirty and then not sure if it's helping when I reuse them or making it worse! Old toothbrushes very useful and can be disposed of each time.

[@tonyd2764]

Couple of comments, with anything involving bearings such as freehubs, add the degreaser to the brush, not the component. Degreaser will find it’s way through to them otherwise. Also you didn’t mention the rear mech lock out which is really handy for cleaning the jockey wheels.

[@RobRidesEMTB]

Hey Tony, great points, thanks for the feedback :-)

[@albertfranqui3598]

Great trick with the allen key in the chainring bolt!

[@RobRidesEMTB]

Cool! Makes it much easier

[@RocketMagnetUK]

Good video, like the Alan key tip. I personally use a good quality degreaser in the chain cleaner (Crankalicious) then to save money and the planet store the waste in a container that once full I filter it through a coffee filter / funnel for reuse (Filters are pennies and a funnel ~£1). You'll probably get a water layer in the bottom but can syringe it out with a tube on a syringe….. Make sure you thoroughly wash off the degreaser from the chain. A good strong degrease followed by a good rinse after each ride and your chain will last much longer especially if your riding XX1 etc considering the costs involved. Grunge Brushes are fantastic final go overs of the chain and the C brush on it fits around your rear derailleur cogs to clean both sides simultaneously. Already plugged Crankalicious but their "Madame Palm" hand socks are easily better than sponges for the frame and you can get into everywhere your fingers can go. Also a bucket with a scratch guard built in if you want to keep your frame as good as possible (those Petrol Heads know a thing or two about keeping paintwork looking good). I use Purple Extreme as it doesn't gunk up and IMO avoid that Ceramic crap it's useless on MTBs. You only need oil in the rollers so the best technique is to spend the 1 to 2 minutes it takes dabbing each link individually, then spin the chain to work it in and wipe of the excess. If you've done the above properly your wipe off should be clean, if its dirty that just chain wear right out of the gate. If I can be bothered i'll use Cranks Enduro Polish on the frame as it helps cleaning the next time around and makes you really inspect your bike for damage etc. If you ride different places make sure you clean your bike thoroughly including wheels, tyres and details as you can spread diseases between forests... so if you like forest riding with trees in them then spend some time cleaning your bike properly including the details.

[@RobRidesEMTB]

Awesome tips there, thanks for sharing 👍

[@stianjarnass]

Thanks for the help! 😃

[@TopseyKretts]

yeahh..i use fenwicks concentrate,has always been great stuff...

[@RobRidesEMTB]

Agree - great product 👍

[@timhall4355]

Ok love this channel and this is the first negative thing for me. I’m not going to do war and peace just my thoughts. Never clamp your dropper Post by it’s coated moving part. Don’t use gt or wd as a lube, it is only a dewater spray. Don’t spray it near bearings. It’s low viscosity and seeking characteristic is designed to get in to bearings to free them. It is not lube and will cause grease to wash out After you lube stantions compress the forks and clean off the dirty ring left, if you are a detail person you can lift the seal and clean under there.. After lubing a chain don’t wipe it off (not yet) , rotate the chain to allow the oil to migrate in to the core of the chain. I do 30 revs and wipe off before the next ride. Great point about the wipe off btw, For me I prefer to take my chain off but using the great park tool cleaner twice is best. Drop a single drop of oil on the brake lever pivots. I do not recommend spraying any silicone because to get it to the correct Viscosity to spray it is diluted heavily with solvent. It is the solvent that will attack your seals which is why I use one that is a dropper and if i ever use a spray it must be guaranteed to not attack seals Don’t be tempted to use a compressor to dry your bike. The seals move under pressure and water will be forced in, Good tip, screw fix non solvent based cleaner for degreasing is good and it can be diluted too 8-10 gbp for 5 litres. Online 5 litres of isopropanol is about £20 and last for ever. Use it to wash out a Tesco antibacterial spray bottle super cheap disc spray. I stick show caps over my disc ( geek) to stop over spray and splash whilst doing the grease bits Great channel , keep it up👍

[@keithdainton6043]

Lol I have used WD 40 on my motorcycle chains for years with no trouble never had one wear out it worked for me.

[@jaybrightwater4055]

I have found the best one for my Levo is Rhion Goo and then a wipe down with Rhino Shine

[@greenlightreading6975]

One additional step I take is put a little lube on the pedals. It is awfully dry and dusty where I ride so pedals can cease up if you don't. Thanks for the vid.

[@garynowicki6452]

Rob, last thing I always do is with my compressor is blow out the motor area through the battery charge port to get all the water that accumulated in the motor compartment. Then I charge the bike battery (in the bike) back to 100%.

[@Sam9wilson9]

Unfortunately air compressors will tend to also force the water / dirt into unwanted areas during the process of “blowing off” (some gets blown in). Furthermore Specialized and myself for that matter lol recommend waiting a day if possible stored in a dry area prior to next use or charging.

[@FancyaBevMate]

Great video mate, I uploaded a video on my channel regarding cleaning my bev so this really helped me out. I keep my new ebike looking fabulous it gets more attention and that's helping spread the word about them as I've had a lot of people ask what it is ;) Cheers

[@RobRidesEMTB]

No probs glad you found it useful 👍

[@tomascronqvist1450]

Great video. Thanks!

[@RobRidesEMTB]

No probs glad you like it 👍

[@johnreese3762]

Nice Bike! Great video, thanks!

[@kn1ghthawks]

Great video buddy. I also use Fenwick's fs1 and gt85 on my giant trance 2 . Because of your great video I've subscribed .. good work.

[@RobRidesEMTB]

Gibson cheers bro 👊👊

[@saltlake6577]

Giant Trance is for pussies

[@mikee8244]

@@saltlake6577 lol

[@saltlake6577]

Mike E get cancer

[@johnlambert1744]

On my 2017 Levo for a full clean I always remove both wheels so I can clean them properly, especially the derailleur and jockey wheels. I also remove the battery after cleaning it so i can properly clean and dry the battery itself and the housing area.

[@mtbboy1993]

I have never needed that, but sure makes cleaning wheels faster, but not the whole process, but I have done it when only wheels ere dirt and had to work on my bike, hub, cassette and so on or swap wheels. I got my cleaning process dialled pretty well so I can clean the whole bike in few minutes.

[@c4rltsyt]

Hi Rob, sensible cleaning video 👍 Would recommend using the silicone spray where mud usually sticks, makes things better on the trail and come cleaning.

[@mikee8244]

Should work in theory. Something like 'silicon shine'. Not too good for matt painted bikes though. Makes em shiny funnily enough.

[@Sceme1991]

Might want to consider covering the rear disc brake while cleaning the cassette to avoid contamination

[@handoromper7987]

Nice video thanks 👍🏻

[@Deanodutch]

You should give the Fenwicks foam chain cleaner a go, awesome stuff🤟🏼

[@RobRidesEMTB]

Dean the Farmer yeah a couple of people have recommended that. I’ll definitely give it a go 👍

[@Deanodutch]

Make sure you grab one of the sponges as well👍🏼 look forward to seeing what you think of it,

[@adam20181]

Fenwick suspension lube rather than That silicone spray for sure...

[@mikee8244]

Nice one El Robinski!

[@electriclyde8260]

My stand is already maxed out with just my Trek Police eMTB so I leave the battery out. I am just careful not to direct spray into the open downtube of a Bosch battery system. I use a battery-powered yard blower to dry it off. I like my eMTB looking nice! It costs enough... LOL!

[@Meadie69]

I can highly recommend a dog dryer (don’t buy a motorbike one, they are the same but have a massive premium on them). You get different attachments and can get all that moisture out of the little nooks and crannies.....

[@mtbboy1993]

I spray Muc off cleaner(not saying it's the best cleaner, just what I got my hands on), let it work in 5 minutes, then I come back, after I taken my dirt clothing off, then brush and rinse off the whole bike using the right brushes for the job, every thing gets brushed and cleaner takes few minutes but sure not 15 minutes, then I hang the bike in the repair stand and dry it with a rag/old t shirt. I clean my bike in the shower, it might get -15 in few days so no good idea to clean bike outside ahah.

[@BEN10TO10]

Good informative video, I've gone ahead and ordered a lot of these products. I'm curious though, would you not use the Fenwicks cleaner to clean all the bike instead of using the car shampoo ?

[@vortexvid]

I was wondering just the same. Also, forgive my ignorance but does anyone know what negative effect would be caused by using a car shampoo and wax (I have Meguiar's Ultimate Car Wash & wax in my garage)? I can make guesses based on basic assumptions, but has anyone used a wax based shampoo and experienced issues?

[@thesolidedgeexpert]

Good Video, try, Screwfix no nonsense degreaser for your park chain cleaner, works much better than the fenwicks. I keep my fenwicks in a plant sprayer, £6.99 and use this for my car wheels, bottoms of doors etc too. Great for so much more than bike and speeds up the bike cleaning process too, i have to use jetwash with Vario lance as my water pressure is poor, this is a good tip. £24 for the karcher one from Halfords.

[@daverichardson6334]

Hey Rob, I love your channel dude. I was bummed I missed your live stream. I am also a member of EMTB Forums. Quick question: What pads to you recommend for my 2020 YT Decoy Pro 29? I ride pretty aggressive downhill and do a lot of jumping. But I still do the occasional trail ride. I worry about the over heating on long steep descends because of the 50lb bike and I weigh about 210lbs. I also entertained the idea of different pads for front and rear. Thoughts?

[@frankokrisztian1400]

Very good video, like all of yours. But... On a dirt bike there is a battery, a electric starter motor, many wire an sensors etc. And i can't imagine to clean without high pressure washer! Soo i think ebikes should be much much more water resistant.

[@CrotZari]

Great video! I have a concern about contaminating the rear brake when cleaning my bike. Do you treat the brakedisc in any way? Or check it? Anyway, great video!

[@RobRidesEMTB]

Thanks Stefan. I try to shield the disc with the cloth to protect from any contamination. Worst case if it does get contaminated you can use a cleaner to remove it (before riding otherwise pads can get contamination then they’ll likely need changing!).

[@jessstumpy_pants5380]

@@RobRidesEMTB how do you clean your disc brake? I've seen the muc off disc brake cleaner - is that any good/okay to use ?

[@grimreaper3526]

love yer bike

[@RobRidesEMTB]

Me too 😊

[@stevejackson5963]

Great video, will improve my cleaning. Only thing, you didn’t use any diluted Fenwick - just neat for chain. What would you use diluted for? Also, when spraying cassette would you consider covering disks to avoid contamination? Thanks

[@83ChrisBlake]

I saw that too. Had to take a few deep breaths. Definitely put a barrier between the two when spraying the dirty cassette and try spraying down towards the ground onto a rag. Very critical step the barrier

[@markoleary9043]

Hey rob wondering if you could leave a attachment for your bike stand all the ones I see are like 100s of pounds

[@SSH01]

wow i feel sorry for you having to read some of these comments 😓😁,anyway nice vid it helps thanks 😎

[@RobRidesEMTB]

Cheers Steve it’s fine all the comments are good feedback!!

[@grannyjone]

I have a 2020 turbo levo and back pedalling with an allen key jammed in the chain ring (to clean chain) makes the bike turn itself on and generates a motor error is this bad for the bike

[@SoulRollerFIN]

Dry lube should work better for cold and snow, right? Finland gets so cold that even the motor way is all ice and powder snow, no muck.

[@Extremegaz25]

Just use a jet wash full blast ...2 minutes!! Only kidding rob, good tutorial..cheers.

[@johnlambert1744]

Rob have you ever had to remove the side motor covers to clean dirt out from around the motor area?

[@RobRidesEMTB]

Not yet 👍 Bike shop did it once, I might have a look soon 👊

[@Leggeh1]

I would first give the bike a quick hose rinse and then start what he is doing, however I would start at the top and work my way down. Finish with a quick rinse, dry, and lube.

[@Blue172]

Thanks Rob, Did you put concentrated cleaner in the chain cleaner or diluted?

[@RobRidesEMTB]

Ahh forgot to mention. I used concentrated in the chain tool.

[@Blue172]

@@RobRidesEMTB cheers Rob

[@mtbboy1993]

another thing I don't fill the bottle every time, I already have it filled, so save a lot of time on that, I also got 5L bottles of Muc Off cleaner.

[@RobRidesEMTB]

Well, yes - I did this whole piece this way on purpose in front of the camera to demonstrate it. Would have been a bit crap if I didn’t talk and you just watched me clean my bike, right?!

[@mtbboy1993]

@@RobRidesEMTB could have done voice over or talked separately, or while cleaning. but not a big deal. but you talked well, I haven't done that yet.

[@pcarts232]

Nice Rob , I noticed you reviewed the Orbea Wild FS but you didn’t actually buy one , do you prefer the Specialized ebikes to the Orbea or are you sponsored by Specialized ?

[@julianshepherd2038]

My local bike shop, in Dingwall, does a muck off refill for £5 so you can reuse the bottle and save money. If they can do it then why can't Tescos etc. The cants.

[@RacingSnakeV8]

GT85 contains silicone, why not use that on the fork stanchions?

[@Dr4g0nW00d]

I use Dasty from Wibra here in belguim the best degreaser you can find 5 liter for 11 euro

[@EE.BIKE.GUM77]

Hi you should check out fenwicks foaming degreesa it's awesome..

[@RobRidesEMTB]

Cheers Stephen will check that out 👍

[@apgsu]

Hello, I have the same bike and i do the same that you show in the video, but it doesn’t start and I have to wait for 2 days and then the bike start. Can it be that the connections in my motor are lose? What can i do to protect my motor from water ? I kwon that dielectric grease is a good way to keep water away but, where i have to put the grease? I realy hope you can help me. Regards

[@SilveryFoxster]

Will clamping the bike on the seat post damage the dropper mechanism?

[@paljaske181]

Do you nano coat it?

[@666DW]

I have a Karcher commercial hot and cold water pressure washer to clean my bikes and then follow up with chain lube etc.....any downsides using a hot wash?

[@rterry2752]

DO NOT USE A PRESSURE WASHER CLEANING YOUR BIKE !

[@lobyapatty]

What do you think about the muc-off bike specific pressure washer - still a no go on ebikes? Or ok?

[@scottbowers7388]

My cassette and derailer doesn't ever look like that at the start, usually thick with gunk and takes ages to clean.. maybe using too much oil. My giant takes me half hour

[@RobRidesEMTB]

I try to do this every week (ish) depending on how much I’m riding. No need to cover chain in oil, it’s only inside the rollers really that really need it 👍

[@--JohnDoe]

Is that motor enclosed? If so does it overheat?

[@albertfranqui3598]

Btw bike wasn't dirty...here in Belgium last weekend bike and rider was caked :)

[@RobRidesEMTB]

👊

[@dewindoethdwl2798]

If you have a Levo, don’t use water to clean the bike, use a stiff brush to shift dried on dirt. If you must use water, don’t get a drop within six inches of the motor otherwise the motor will die a few days after warranty ends, in a puff of rusty bearings and corroded electrical connections.

[@robertwalker841]

what do you clean tour brushes with after use ?

[@mtbboy1993]

rinse them off with water, brush stuff off in the shower, then you can clean it in the washing machine on hand wash cycle, with special cleaner, read the recommendations by the brand. Toko has cleaner for washing Technical clothing, they got cleaner for wool too. that's what I use. but there are other brands out there, I don't remember them all at the moment.

[@thedutchwoodworker3472]

Nice video never seen gt85 before where can i buy it ?

[@TheAegisClaw]

Everywhere you can get WD-40 here in the UK. It's essentially the same stuff from a different brand name.

[@RobRidesEMTB]

Yeah very similar to WD40, I think GT85 has Teflon in it and I prefer it for these jobs to WD40, seems to stay on better 👍

[@thedutchwoodworker3472]

Couldnt find it just bought some mucoff silicone spray even has a nice cherry sense to it haha

[@666DW]

Halfords sell GT85 but a simple google search will probably return better prices.

[@charleyBIGspuds1]

You forgot to mention to cover you rotors customer if you get anything from your chain on to your rotors that means some new pads . Well that's how I do it . But thanks for your videos. Kiss kiss 💋🤣

[@antdod1]

I'm thinking of getting the specialized turbo tero 3.0 I see on the manual it says not to use a hose to wash it do you think it's just specialized covering themselves???

[@Ash522MX]

don't spray directly into motor..... empties sponge full of water onto it haha... not sure why manufacturers make an ebike then you can't really clean it..its a mtb. its going to plastered love your vids, keep it up

[@Scoey2912]

Hi I’ve got the same bike Im on my third set of brake pads and I’ve only had the bike 8 weeks I’m riding no different to my normal bike , thanks.

[@RobRidesEMTB]

Paul that doesn’t sound right at all, what kind of terrain are you riding?

[@Scoey2912]

Trail parks and on the moors , the same as what I’ve seen you do , It can’t be right surely I go out with other lads one has a cube and the other has a trek there’s are fine .i went back to the bike shop and they said they can wear down fast but I’m only getting a couple of bike rides out of it .

[@RobRidesEMTB]

I’ve not changed pads yet and I’ve owned the bike since launch. I’d say you need to take look at what’s happening, are you dragging the brakes a lot?

[@Scoey2912]

Rob Rides EMTB no and they aren’t rubbing , I’ve orders a different brand of pads I’ll give them a try . Thanks for replying Rob .

[@RobRidesEMTB]

No probs. Let me know how you get on :-)

[@coolchamber1]

Hi Rob, great vid. I notice that you have a mudguard on the front of your Levo - which one did you go for?

[@nickturner4150]

That looks like a RRP bolt-on proguard mini.

[@thunhu5292]

Wow.

[@albertfranqui3598]

What lubing the chain direct after washing? Chain is still wet inside!

[@RobRidesEMTB]

Yeah it will be a little wet... but it’s all about how much effort do you really need to go to... this method has served me well over the years 👍

[@albertfranqui3598]

Strange because water and oil are no friends....maybe with compressor and a point blower the chain dries faster, after all when you buy a bike that power and your power the drivetrain need great service. Btw miracle shine of mucoff is great for a shinny bike and easier to clean. But still great vids Rob!

[@georgesolomon5696]

@@albertfranqui3598 Agree, I use a compressor to blow water off the chain. Although I have dried it thoroughly with a towel (i thought), to my surprise a lot of water is blown off...

[@jimj8300]

me too

[@ander172]

Hi bro Why u clean chain first and after that u start cleaning frame ? It make no sense to me. Because when u start cleaning frame, all dirty stuff comes into chain again.

[@RobRidesEMTB]

Chain and gears are the dirtiest. Filled with oil and lube. Clean all that crap off first. Frame only contains mud and will run off the clean chain with clean water. If you cleaned the frame first you’ll get oil splatter all over it when you clean the chain.

[@Peter57808]

All good stuff Rob except for the battery advice. If any of the seals between the battery terminals and the motor fail the water will get in! At that point the battery will short and burn the bike, and the building it is in, down! Always take the battery out before doing any maintenance on an Ebike, a simple lapse will see your fingers removed when the motor comes to life unexpectantly !

[@RobRidesEMTB]

Thanks Peter - Specialized however advise strongly to keep the battery in when cleaning on this bike 👊

[@Peter57808]

That's fine, but with 43 years of experience with electricity and batteries I would take the safe route and remove the battery! No battery, no power source, no incident, no issue, no damage, no injury.

[@Bikeaddict4235]

The battery isn’t consumer removable on my Focus jam ,

[@huwjones512]

Rob- what’s that front mudguard? I like!

[@RobRidesEMTB]

That’s the one that comes included with the DT Swiss F535.

[@huwjones512]

Ah- I’ll stick with £30 pro guards then... Cheers.

[@moonstriker7350]

How long did that take? That bike was just slightly dirty, I get far worse mudcaking on mine sometimes. Not sure I want waste hours and hours of my life cleaning a bike like it's a toddler.

[@CarkeekW]

The discs have to have over spray on them by the end of this .. id add a disc clean to the end of your process.

[@RobRidesEMTB]

Wayne Carkeek hi Wayne, all good after this ride, no issues at all 👍 I’m usually pretty careful with overspray!

[@georgespecs5732]

What bike stand is that

[@philipTOMPSETT]

Any chance of updating the links if you get a bit of earnings as happy to support the vids albeit in a small way. Thanks

[@shaneweightman]

about time someone, showed somthing regarding value for money, was not impressed with that it turned all my switch gear a milky grey colour ,, and that was following the instructions to a t,, either way will give this product a bash ,,, cheers shane uk

[@RobRidesEMTB]

Hi Shane, what did you use that turned still milky grey?

[@ed250256]

Still using brushes, that so yesterday, use C18 truck wash and a bit of degreaser. Just need to hose off the mud, spray the rear mech and chain with degreaser, spray the remainder of the bike with truckwash. Wait 10 minutes as hose off, all done....relube the chain. Perfect result no dirt haze remaining and no brushing.

[@rterry2752]

If I cleaned my bike on the back patio the wifey would KILL me.

[@mikee8244]

Why? You can rinse it off ,besides it must surely get rained on. Oh yeah. Women. 🤷‍♂️

[@markoleary9043]

Use a chain bath

[@olegpetelevitch4443]

I just bought a $5,999 e bike and its cross MTB ! Scared to put water near it !

[@rterry2752]

You can't cross rivers like you can on a non ebike. And why chance it ?

[@Andybarney555]

Chain 1st!!!🙈 now blown frame mud back on the chain. Drivetrain last. No brainer

[@mikaa1202]

Dont use a sponge ist micro scratches your frame

[@rterry2752]

Unless you wipe in an upward and out direction away from the paint.

[@pacovl46]

What do you do with the dirty chain water? Do you pour it down the drain?

[@grannyjone]

I do that

[@pacovl46]

grannyjone probably not a good idea.

[@grannyjone]

@@pacovl46 where do you pour it then

[@pacovl46]

grannyjone collect it in an empty engine oil bottle or canister and when it’s full dispose of it at your local recycling center, if they take it? They do take old oil at the recycling centers I where I live.