Learn how to concrete flat and also check out my other concrete videos on this channel lots of handy tips
Пікірлер: 157
@adamkane81756 жыл бұрын
You forgot the most important part of concreting here in oz....you must complain constantly about trucks/batchers/reps/pumpy's/labourer's/the weather and other concretors whilst screeding...it makes it even more flat.
@concreteninja6 жыл бұрын
Adam kane ha ha 😂😜👌
@ssgvng25885 жыл бұрын
Bahahahhahaha fuck yes
@abrahampoodle78744 жыл бұрын
Same in NZ, placers are always whining about us pumpys
@mikehart79095 жыл бұрын
As a journeyman carpenter who has worked on major commercial projects all over the West coast of the United states,I have set up many pours and have met many "Crete dogs",,,I've got to say that ninja is one of the best I've ever seen!!
@concreteninja5 жыл бұрын
Mike Hart thanks mate I really appreciate it . Just trying 🙏🤙🏻
@luvskippy4 жыл бұрын
A great informative tutorial for aussies, a good one on how to hold the screed....thanks mate.
@sjruffing5 жыл бұрын
You are incredible on the stick. We just bought a couple of the aluminum screeds like you use and they are amazing. Thanks Mr. Ninja!
@jimmylopez63945 жыл бұрын
I've been concreting for 10 years in nsw australia and good to see a video on how to to properly screed concrete not like the cowboys who screed with a timber with 2 people and scissor it cough cough usa. Everything that is said in this video is 100% correct. I remember being told dont rush and get it right when I was learning. It is a lot harder than it looks in vid but technique in video is the way I was shown and the right way to do it.these screeds we use in australia that wasn't mentioned in vid, ithought I would add for anyone who didnt know.They have a sharp edge and blunt edge we always have sharp edge facing us when screeding to cut into concrete and then blunt to close up concrete when we roll screed away from us
@concreteninja5 жыл бұрын
Jimmy Lopez thanks bro and it is good to do it the right way or the Easyway . There is over 250 concrete videos on my channel make sure to check them out and there is a lot more to come . Thanks for watching bro
@generaljemz89854 жыл бұрын
@@concreteninja hey bro, I've been thinking about pursuing a career in concreting, what advice would you give me?
@rorymagnatheredking Жыл бұрын
Best tutorial on the tubes Ninja! Keep up the good vibes bro 👍
@HgHgHgHgHgHgHgHg6 жыл бұрын
This is how my old boss did it when I was a concrete laborer, he went hard in 35 degree heat all day.
@matthewcullen12983 ай бұрын
Nice work mate. Im a chippy but used to build tilt panels in northern NSW and Queensland. I actually love typing steel and concreting but like plenty of older tradies my back and knees are buggered. It makes it hard to concrete these days
@raymond09965 жыл бұрын
NZ we do same thing ,I pull 6am in morning , everything done before 9am
@nathangossow99822 ай бұрын
Good stuff brother
@mikefenner74226 жыл бұрын
Its great to see old school manual screed . it think this is the best way to get perfectly flat .
@hsm89766 жыл бұрын
magic screed gotta be lazy and look after your back
@4x4CampingandAdventures Жыл бұрын
Nice mate about to do some general stuff around the house awesome video
@JesseVanPelt3 ай бұрын
I love this guy. I want to go work with his crew one day! Long way from New Jersey USA THOUGH!
@concreteninja3 ай бұрын
Thanks, Mate . I appreciate it.
@JesseVanPelt3 ай бұрын
@@concreteninja It's an honor to be called "mate" by the concrete ninja! Haha
@itstoxic_light4849 Жыл бұрын
This guy makes this shit look so fucking easy it’s crazy
@thomasgeraghty53746 жыл бұрын
They make a great job of their concrete in Oz, ive seen it. Miles ahead of Chicago
@concreteninja3 жыл бұрын
Thanks mate change is good
@allenrj13 жыл бұрын
Would be good to mention how wet your mix is whilst screeding. Yes I know how good our concrete pourers bu a little more info for the young bucks would be good
@joeyy172 жыл бұрын
The concrete mix in the USA looks extremely wet. That wouldn’t be allowed here in Aus. Also we use real steel not any of that fabric rebar
@mrjaywins74584 жыл бұрын
I'm about to get a concreting job and I said I was experienced lol but I'm not never done it in my life so I'm tryna quickly get a lil info off these concrete videos 😂
@concreteninja4 жыл бұрын
Jay Wins that’s awesome bro go for it there is heaps of videos on my channel over 400 concrete videos sit down and enjoy and I hope you go good on your job good luck
@eastmarthaducker15166 жыл бұрын
Awesome work!!
@jamesscottyates35776 жыл бұрын
i like it man easy to work behind. im from the u.s. most people rip here i hate it sucks to seal up. me i do what i call the jigsaw screed. similar to yours a little different and a bigger screed. but keep up the nice work i know it took longer because you were demonstrating how its done. sorry most people cant comprehend and if they got to finish behind you once im sure they would prefer this over the rip n kick method
@wehelptradies43612 жыл бұрын
This is awesome! Keep it up!
@mikep30086 жыл бұрын
We screed concrete the same exact way here in America only difference is we aren’t using that rod on top it’s a 3&1/2” rail
@areeskinwar72745 жыл бұрын
I know I was like where do they get those as mine is a 8ft magnesium 2x5. Ours is good for pulling lots more concrete when you have shitty helpers, with good helpers you can use the one he has
@tienglongmy5 жыл бұрын
@@areeskinwar7274 Google Marshalltown Combo Screed
@doitdan23545 жыл бұрын
Don’t you use shit timber screeds? Mate of mine went to word of concrete and was showing me ‘hand crafted timber screeds lol’!
@outofsquare6 жыл бұрын
I'm in the us and I screed a lot, you do a great job sir
@taffybryn6 жыл бұрын
look at nz vids you will see it
@joeyR1CBR1000RR6 жыл бұрын
Good job mate, these clowns who think you gotta go break records every time you pick up a screed arent right in the motor, i kick these bastards off the job site, concrete has got to be flat not screeded in record time.
@topangachronic94636 жыл бұрын
Put a beer holder on that thing and I'll buy two
@danielramirez85166 жыл бұрын
that!looks like a good tool to do curve and gutter i'll make me one
@warrenmccormackjnr48133 ай бұрын
build the concrete structures on cronulla
@Prawnchowmein6 жыл бұрын
This guy is amazing
@concreteninja6 жыл бұрын
Prawnchowmein Thanks buddy
@jondavidbristow98196 жыл бұрын
Great job and we screed Concrete the same way where I live in Arizona just always moving much faster
@concreteninja6 жыл бұрын
Jondavid Bristow nice 👍
@MrCretemaniam6 жыл бұрын
He's Good !!!
@mario3783782 жыл бұрын
nice... I start like this in 28 years ago
@andibutrus44386 жыл бұрын
Best way to do concrete
@hayleytawhai48556 жыл бұрын
Just a tip dont screed up to your gumboots, stop atleast half a foot before your boots and take a step back.not only does it stop the hole from filling up with slurry but you also can keep screeding with out having to stand up and having to fill comcrete with your boots...you also need good rakers or it going to be a long day at the office.
@concreteninja6 жыл бұрын
Hayley Tawhai Thanks for the tips buddy we never have a long day and a long day for me six hours driving out the gate . This whole house took me an hour and 45 minutes to screed off . show me a video of you doing it and then I can comment about your style . each to their own buddy . I have been doing this for 20 years I’m not about to change my style and I’ve only got another four weeks to go and then fuck the concreting I’m going to be living the dream . 🤘
@taffybryn6 жыл бұрын
yep aussies never wana no shit
@deanno70676 жыл бұрын
Great job mate subscribed !
@concreteninja6 жыл бұрын
Dean no thanks bro 👊
@johnneytilley41655 жыл бұрын
What is the mix you usually use
@thomasgeraghty53746 жыл бұрын
Great Screed, use a bit of timber here in chicago. Open a bunnings!
@concreteninja6 жыл бұрын
Thomas Geraghty thanks bro have you ever need a hand in Chicago on a big one give me a message .
@thomasgeraghty53746 жыл бұрын
DE Vlog where in Oz are ya. Mad busy in Sydney. 100% have the start for any man in the morning.
@concreteninja6 жыл бұрын
Thomas Geraghty Hey mate I’m in Bundaberg Queensland just about to start work right now what are you got going in Sydney
@thomasgeraghty53746 жыл бұрын
DE Vlog Lite rail & west connex.
@warrenmccormackjnr48133 ай бұрын
we need more concrete structures
@dconstruction70994 жыл бұрын
I am watching and comment
@kkkimakaze6 жыл бұрын
Haha this is great lovee the subtitles
@realdanbuildsit6 жыл бұрын
Awesome work, I ordered an OX tools 2400 mm screed here in the US after seeing this video and I've used it a few times. What mix are you using in this video? Most of our concrete has large (up to 25mm) aggregate and it's tough to screed with this style screed. I'm pouring 75 square meters tomorrow and ordered it with smaller aggregate to see if it screeds easier. Thanks for the videos and keep up the good work 👊🏻. Are you on Instagram?
@concreteninja6 жыл бұрын
Dan McIntyre hi mate that’s awesome you have brought a screen . Where use 25 m and 20m stone . This concrete was 32 MPA . Nice and creamy
@realdanbuildsit6 жыл бұрын
DE Vlog I think 32 MPA is about 4600 psi. We usually pour floors at 4000 psi here. I did a pool deck today with smaller aggregate and it was a little easier. Really liked the Aussie style screed. Beats a 2x4!
@concreteninja6 жыл бұрын
Nice work if you ever need a hand just give me a message
@jillymot7 жыл бұрын
Good work mate make a video on finishing concrete
@concreteninja6 жыл бұрын
Jillian Heinrich Have you have a look on my channel there is some new videos on finishing concrete👍
@chrisvanlit6045 Жыл бұрын
Nice one. Do you have a video on raking? Lets see....
@constructionworkeralinl33197 жыл бұрын
Good job mate 👍
@betterworldok3802 Жыл бұрын
Good job
@isaacbongomin40724 жыл бұрын
Yeah the boys!
@christophertar68084 жыл бұрын
Awesome video mate. I'm from Penrith, where are you from? It's so nice to see a straight up video for once, love your work.
@concreteninja4 жыл бұрын
Christopher Tar thanks mate I am from Bundaberg Queensland and there is lots of videos on this channel over 300 concrete videos for you to enjoy thanks for watching
@christophertar68084 жыл бұрын
@@concreteninja awesome videos as I said. I'm from from Sydney and spent a few months in Cairns, and a dab in Bundy. I specialize in CCTV but recently transferred to civil. I'd love an 'Aussie explanation of mpa, reinforcing, laser levels and RL' compatible with Australian standards, if you have the time please. Loving the videos 🙂
@gabrielgonzales81636 жыл бұрын
buenos videoos construccion #1
@concreteninja6 жыл бұрын
Gabriel Gonzales 👊
@jeanramirez7514 Жыл бұрын
What's the name of these screeds
@concretedr.28716 жыл бұрын
The concrete in Australia must set up the next day....by the time your finished screeding..
@concreteninja6 жыл бұрын
Joseph Torres in Australia we usually Pour and finish with in 5 to 6 hours . Packed up and going home .
@joeyR1CBR1000RR6 жыл бұрын
Joseph Torres not sure where you get that kind of concrete from, concrete waits for no one, its not like if you spend a little longer screeding its gonna take longer to go off...
@jemfly10626 жыл бұрын
He's demonstrating how to do it, so it's probably half as fast as he usually works, just so you can see the technique. Smooth, fast worker, you can tell just by the way he moves and the finish he achieves with economy of movement. Top job.
@ian_s74815 жыл бұрын
🧐
@radhiratheepan36095 жыл бұрын
Joseph Torres Concrete in Australia is hard than others countries, because I have worked in USA Canada and England, but in Australia concreting must be top quality when it’s come to concrete, not like screed to eye level and make looks good with bull float , we keep do chech level as we screeds,
@xXFATSO72Xx5 жыл бұрын
11am tools down, 11:15 beers up??
@joshuawall5859 Жыл бұрын
Perfect 💪
@jackhealy98952 жыл бұрын
Do your videos in hi def brus, not raggin you out but it’s easy to hide histakes with low def videos. Any good concreter will give you respect if they can see detail so let’s see some detail 🤙
@martzcorcor56756 жыл бұрын
Haha looks about 160 slump!! Get some 50mpa in summer at 80 slump see how ya go people!! Not always as easy as this let me tell ya. Still can screed though and good tips mate👍
@concreteninja6 жыл бұрын
Martz Corcor thanks mate 👊
@MrDigger825 жыл бұрын
Know all hero 👆,right here ,slump looks fine you basher , I’ve used full dose accelerator 50 mpa ,with plasticiser mind you ,10 minutes later could barely walk out of it whilst screeding .
@paolomarino74755 жыл бұрын
Veramente bravo
@diyidea30316 жыл бұрын
Hi !!!!!! What is size of yors screed long annd square - size 2.5x2.5 inc - or ????
@concreteninja6 жыл бұрын
Ihor Zakharevych Please so this one is only 8 foot screed
@malakeasi83175 жыл бұрын
wow it's nice.... we do that too in fiji.. can I apply for your company..i would love to work in your construction company
@concreteninja5 жыл бұрын
Mala Keasi Thanks mate but sorry I have no jobs but if you need a worker in Fiji I would love to come and work for you
@diyidea30316 жыл бұрын
NINJA !!!! I got qustion - way you use are helicopter mashine ! its dont enougth yous 8 feet screed - after Bull Float - and arter Fresno BIG BLUE ! thes is will be not enaugth quality to biuld house on it - tu putt tails on it oa eany enother floor ! what can you say ! you so many of thi vidwo in youtube in USA
@radhiratheepan36095 жыл бұрын
It’s May looking easy but you need really more practice to learn it
@seanward28316 жыл бұрын
Like your style in working what size is your screed.
@concreteninja6 жыл бұрын
Sean Ward 8foot screed
@seanward28316 жыл бұрын
I seen the clip on using the walking trowel but the sound was not that good at what stage do you hit it around when it's ready for the pan or combos
@concreteninja6 жыл бұрын
Sean Ward You can have it pretty much straight after you Bull float it . The more you keep on it the easier it will be . I will try to make another video about the walking Trail very soon .
@richo11774 жыл бұрын
Off to the pub
@diyidea30316 жыл бұрын
Than say something. With helicopter its faster- quality better, or. Or ya- ya ... on big area helicopter its more easy to use.
@concreteninja6 жыл бұрын
Ihor Zakharevych When you screed the concrete flat it is easy to finish
@johnneytilley41655 жыл бұрын
You still got to screed the fucking stuff. Gotta be flat dumbass
@gilbertmendeja61805 жыл бұрын
how to apply concreting crew in Australia from pilipines
@concreteninja5 жыл бұрын
Gilbert Mendeja I’m not sure mate might have to look it up on google
@brandonlee33146 жыл бұрын
Hey mate would be great if you could do a few more videos on screeding or maybe even a full on tutorial
@concreteninja6 жыл бұрын
Brandon Lee i'll see what I can do in the next couple awakes keep a look out .
@brandonlee33146 жыл бұрын
Cheers for that bud not often do you get to see screeding done properly on youtube every channel has americans using 2 by fours lol
@mario3783782 жыл бұрын
I would like to exchange ideas in the concrete... I am in los Angeles california EEUU
@concreteninja2 жыл бұрын
What would you like to know brother
@albetorodriguez9895 Жыл бұрын
Yeah that’s why you have to get it hard😂🇺🇸
@chriskramer72636 жыл бұрын
where can one get one of these screed tools in America?
@realdanbuildsit6 жыл бұрын
chris kramer I ordered an 8 footer on Amazon. Works pretty good but this guy makes it look easier than it is. lol
@johnneytilley41655 жыл бұрын
Marshalltown sells them screeds
@arivdarmawanarivariv27896 жыл бұрын
May i work there
@concreteninja6 жыл бұрын
Ariv darmawan Ariv ariv maybe one-day the job is nearly finished .
@trenthudson69583 жыл бұрын
And in the pub by 1
@hsm89766 жыл бұрын
jesus. just level it off with the screed and then nice finish it with the bull float . make life easy for yourself
@concreteninja6 жыл бұрын
h s m hey bro I never said life was hard
@hsm89766 жыл бұрын
+Concrete ninja haha i know mate i done slabs for about 6-7 months about 2 years ago we were a bunch of lazy fuckers so we just used the motor screed(magic) all the time .it does make life much easier.
@concreteninja6 жыл бұрын
h s m oh mate around where I live that’s what people pay me for is to screed . And it has to be perfectly flat . The best thing about screening flat the finish time is easy as fuck . I normal day for me is six hours but I get paid day rate so the quicker I finish the more money I make .
@concreteninja6 жыл бұрын
h s m I have been concreting for 25 years and no sore back I think I am doing okay thanks for your concern .
@bestofthenavy16095 жыл бұрын
Concrete ninja there’s no way you’ve been concreting for 25 years you look 30 that means you’ve been concreting sonce you were 5
@raffiehydermirza18035 жыл бұрын
Working in Australia as a civil engineering helper is far better than doing Engineering job in India. Even labour earns good sum of amount in Australia
@concreteninja5 жыл бұрын
raffie hyder mirza nice 👍
@adamkane81756 жыл бұрын
I almost forgot...waiting time/where's smoko chick?/ im not going and boxing that up after i finish here...you should never run out of things to whinge about if your properly organized...the options are endless
@concreteninja6 жыл бұрын
Adam kane ha ha I like your style . But I’m on day rate One job a day for me 👌🇦🇺🍻
@adamkane81756 жыл бұрын
Concrete ninja Same dude...but they always push for that bit extra... thats where a good bit of subtle backstabbing comes into play...thats a whole other skill...hey you should make part 2 ' there is nothing a bullfloat and stick trowel cannot fix '
@concreteninja6 жыл бұрын
Adam kane have you have a look on my channel there is a lot more concrete videos . Thanks for the chat bro 👌🤘🇦🇺
@evanbrown23856 жыл бұрын
You are just playing with it at this point..
@concreteninja6 жыл бұрын
Evan Brown if you call making it flat playing with it yes
@2READYCRETE6 жыл бұрын
Not for nothing. But you guys down under must not do alot of square footage, or Square meters. . To many moves, and if you get a hot humid day, you guys will be killing yourselves when Cold joints start happening and you when you have to drop guys back to start finishing
@ddiemonyoutube10556 жыл бұрын
2READYCRETE aus go hard.
@concreteninja6 жыл бұрын
2READYCRETE In Australia gets pretty hot and I’m in Queensland one of the hottest places in Australia
@adamrobles94075 жыл бұрын
Here In United States Of America, we Don’t Do It Like That, We Get 2 Persons At Each Side Of The Screed, And Do It Old School Ways
@lewisgawthorne21876 жыл бұрын
rough
@concreteninja6 жыл бұрын
Lewis Gawthorne show me how its done mate
@JoseRodriguez-gn9qr6 жыл бұрын
Thats a slow ass screed
@concreteninja6 жыл бұрын
Jose Rodriguez You do realise I’m just explaining how to use a screed . Have to show us a video of how awesome your screed is .
@JoseRodriguez-gn9qr6 жыл бұрын
DE Vlog all that rubbing you gonna make it come
@upegatilisamoa6 жыл бұрын
Hes explaining how to do it...and by that showing the movements more times shows people who who have no idea enough times to understand. Quite obvious but not for some. #straya #qlder
@traininsane33656 жыл бұрын
La'auli Muaulu Saili don’t bother explaining to him his a stubborn yankydanky #2men1screed
@upegatilisamoa6 жыл бұрын
TrainInsane Bloody oath
@tomasarias39046 жыл бұрын
Sorry but u guys are to slow
@concreteninja6 жыл бұрын
Tomas Arias Don’t forget I am explaining how to do the job we go a lot quicker than . Have to show me a video of you guys have ago I might learn something always out to learn something new .
@juninholyon86 жыл бұрын
Fuck This mexican always think they are better at everything
@taffybryn6 жыл бұрын
yep iv workd all over aussie for years look at nz vids
@johnneytilley41655 жыл бұрын
Some people are just born to bitch
@jemfly10624 жыл бұрын
Tomas, are you in the USA? Slabs in Oz are finished at a faster rate and are almost always flatter and more accurately level than most of the ones we see on YT that are done by the Yanks and some others. As well, the Yanks don't use reo chairs, or mesh, waste heaps of time tying reo together (and don't seem to have the reo supported correctly), pour very sloppy concrete, use pieces of timber to screed, so it's never truly flat, then try to take out the resultant waves with gadgets like jitterbugs and rollers and so on. Then they spend forever on their hands and knees hand trowelling everything. We screed flat first, with a purpose designed aluminium screed with handle, use a laser level, so no need for the wasted time and effort to try to fix it after that. Yes, we take a bit longer to screed, but save HOURS because we don't need to fiddle forever trying to get it flat. It's dead level and flat before the bullfloat and chopper goes on. They are finishing tools and are not intended to be used to flatten wavy and uneven concrete. Get it flat first, then finish it properly.