Will the display be compatible with a Hik Vision NA-KB6013-WIP doorbell camera?
@captainzeppos Жыл бұрын
Any idea if this has a web interface as the doorbell does? Trying to access it via IP doesn't work, it doesn't accept the connection. However it does appear online in Hik Connect, SADP tool etc
@chiefordnance Жыл бұрын
How to setup 2 different door stations like a front and back door, and 3 indoorstations 1 per three floors.
@rabihsaghbiny4143 Жыл бұрын
hello, how do i can open my sliding door form the indoor unit please? it is going to be a free voltage contact?
@mcRafen2 жыл бұрын
Hi, very interesting video. Do you know if is it possible to remove the audio message "The door is opened" when unlocking the door? . Thank you
@DCEDistributionSdnBhd2 жыл бұрын
hi, you can try adjust the prompt sound volume in the Volume Settings.
@sayhongtan8993 Жыл бұрын
Awesome video! Is it possible to view the Door unit KH8003-IME1 via HikVision mobile app if the PoE switch is not connected to the router? Meaning to say, the Door Unit KH8003 and the KH6320 are in a network by themselves with no connection to the Internet.
@DCEDistributionSdnBhd Жыл бұрын
sorry cannot. cannot get any notification at the mobile apps, when ur device no connected with the router. but, if ur mobile and device in the same local network, and you didn't leave that environment, u can through the local area network get the notification, on condition that you can't leave that place.
@sayhongtan8993 Жыл бұрын
@@DCEDistributionSdnBhd okay thanks for the detailed reply bro.
@alladyn212 жыл бұрын
Hi, Can you open a gate or door using this screen? I have DS-KV8213-WME1 intercom with two outputs but unfortunately from the display level I can open the door only
@DCEDistributionSdnBhd2 жыл бұрын
hi, open door i think no problem, but a big issue is want open gate.
@MrM1LL0 Жыл бұрын
Tu sabes como deshabilitar el aviso por voz cuando no hay nadie en casa?
@davidsilveira1982 жыл бұрын
Hey there, What would work for a rural setting. In which the gate is at the entrance of the property. We have a shed that has internet and electricity 30m form the gate, and our house is 150m from the shed ( 180m from the gate). We would like video intercom, with the option of locking ,unlocking the gate, mobile phone compatibility and a key pad at the door.
@DCEDistributionSdnBhd2 жыл бұрын
this behavior is not recommended, because you are already over 100m away, i don't think the signal can reach so far.
@steveking50552 жыл бұрын
I set up a system for something similar, over 280m, using wi-fi
@DCEDistributionSdnBhd2 жыл бұрын
@@steveking5055 If you are using WIFI, and the signal is sufficient and stable. i think is ok. pls try using computer and install hikvision SADP Tools, try can find Indoor and Outdoor station or not.
@engHazemRaafat2 жыл бұрын
Can 2 intercoms (Door station) be connected to this indoor unit?
@DCEDistributionSdnBhd2 жыл бұрын
sure, can Max can connect 2 outdoor.
@daviddelew2 жыл бұрын
Hi, does this unit or any of the Hik indoor stations work on Wi-Fi. Looking to connect the external intercom doorbell via cat 6 but didn’t hardwire where internal station will be situated. Will connect all to my Hik NVR
@DCEDistributionSdnBhd2 жыл бұрын
hi, if indoor station, DS-KH6320-WTE2 this model supported wifi.
@anahenriques88704 ай бұрын
@DCEDistributionSdnBhd ,hi I have the exact one on the video but can't get it configured, I'm missing SIP don't know what letter or numbers to put down to register it...also I got my device in uk but installed it in my house in Portugal does that impact its functioning? I'm desperate help me.
@kostpan7571 Жыл бұрын
Hallo with model that has wifi (2wire) with dhcp it does not get ip automatic...if i enter it and gate ip same..it connects but after some minutes it disconnects from the outdoor?
@gye46602 жыл бұрын
Hi! Can i do this without poe switch too?! I built in the indoor and outdoor unite yet…. By Wired connection… everything is working just a cant use the system with app!!! I can use it onlie!!!
@DCEDistributionSdnBhd2 жыл бұрын
sure, indoor & outdoor units can work without PoE Switch, but u need find 12VDC to giv device power. outdoor station must connect with RJ45 cable connect to network switch, indoor station can support Wifi or RJ45 connection.
@mbzumzum5002 жыл бұрын
very interesting video..thanks but please help me configure the system with 2 outdoor units and one indoor..I can't ... connect it ... I always have a call from one
@DCEDistributionSdnBhd2 жыл бұрын
hi, you can waiting and follow the video below, thanks kzbin.info/www/bejne/fKS9oWWthb14Z68
@JuliusKuk2 жыл бұрын
@@DCEDistributionSdnBhd No its about two indor monitors. How about two door bels and one monitor?
@thegeneral93702 жыл бұрын
Does this system have motion detection ? Can you improve the quality of the image as my picture quality is not very good.
@DCEDistributionSdnBhd2 жыл бұрын
hi, device cannot support motion detection, i think model this 2mp video quality is good enough already.
@thegeneral93702 жыл бұрын
@@DCEDistributionSdnBhd apparently you can have motion detection if you connect a dvr or some sort of storage device to the doorbell.
@DCEDistributionSdnBhd2 жыл бұрын
@@thegeneral9370 yah, if you connect with DVR/NVR as do, actually this device does not have motion detection function.
@asatpteltd4563 Жыл бұрын
How many main units we can add into indoor station?
@DCEDistributionSdnBhd Жыл бұрын
hi, 1 outdoor can link with 18nos indoor station.
@ahadraza2299 Жыл бұрын
Can we attach an external bell with this device
@DCEDistributionSdnBhd Жыл бұрын
In logic, there is no problem, connect ur bell to indoor station relay output.
@carlosjuskoski7424 Жыл бұрын
Hola, en caso de corte de luz. ¿Cómo puedo alimentar el switch poe?
@DCEDistributionSdnBhd Жыл бұрын
good question, please prepare a UPS for supply PoE switch power when power down.
@Stop-asking-for-handle Жыл бұрын
My model/version had a switch to enable the verification code but it didn't show any. Turns out there is an input box right next to the switch where you have to manually input a code. It's invisible so just press a little to the left of the switch. Nearly lost my mind over this
@DCEDistributionSdnBhd Жыл бұрын
Great, Thanks for sharing, let people who don't know know better
@farhodsaidahmedov1225 Жыл бұрын
Can you clarify how to get verification code? Mine either not showing the verification code
@Stop-asking-for-handle Жыл бұрын
@@farhodsaidahmedov1225 you have to type one yourself. Like I described, there is an input box but it's invisible. It appears to have a toggle switch all the way to the right of the display on the same line as the verification code. Tap just a little to the left of that switch and if correct, an input keyboard should appear where you just type whatever you want.
@kajemberamadhan83172 жыл бұрын
how to I connect two monitors to one door station
@DCEDistributionSdnBhd2 жыл бұрын
hi, u can watch my video link as below kzbin.info/www/bejne/fKS9oWWthb14Z68&ab_channel=DCEDistributionSdn.Bhd.
@amedeetje6 ай бұрын
the device is all of a sudden no longer visible in the hiksconnect app. I have to add it again but if I go to the indoor station, the button ‘Hik Connect Service Settings’ is not there so I cannot find the QR code to scan it in order to add the device. What can I do?
@DCEDistributionSdnBhd6 ай бұрын
indoor station connection by wifi or wired?
@amedeetje6 ай бұрын
@@DCEDistributionSdnBhd I believe it’s wired.
@joshwolff42232 жыл бұрын
what does it mean when DHCP wont stay on? thank you
@DCEDistributionSdnBhd2 жыл бұрын
i think fix your IP will better u using DHCP, Because the ip priority depends on the connection order of the device, may indirectly affect the stability of your connection
@theonlypman Жыл бұрын
@@DCEDistributionSdnBhd Any chance of a step by step for this? in simple language please.
@Mic0m4N Жыл бұрын
I own two of these indoor units. Too bad that there is no option of changing background or theme. Text (Call, Message, Live View, Settings) is barely visible. White on white, come on.
@hyperspaced777 ай бұрын
Hello, how do I browse a simple web page?
@DCEDistributionSdnBhd4 ай бұрын
hi, as i know hikvision indoor station cannot access by web page.
@AndreasLeon822 жыл бұрын
For some reason door station unit is not found it says no device found. Although it is connected to port 6 and powered. Any ideas?
@DCEDistributionSdnBhd2 жыл бұрын
may i know your indoor & outdoor unit distance between?
@AndreasLeon822 жыл бұрын
@@DCEDistributionSdnBhd Distance between indoor and outdoor units is approximately 10 meters. Also distance between indoor unit and power supply unit is 7 meters and from door unit 3 meters. Thanks for the quick response!!!
@DCEDistributionSdnBhd2 жыл бұрын
@@AndreasLeon82 you can try to use Hikvision SADP Tools (PC) seacrh and configure indoor and outdoor unit. Because i'm not sure there is a problem with the previous steps.
@laveshtyagi42342 жыл бұрын
Please check IP address are they in network of same IP series, from laptop ping both units properly or not
@KeRatniK2 жыл бұрын
You need to link indoor unit with outdoor unit. IP addresses need to match. From watching this video I'm confused on how the outdoor unit automatically rang. I have DHCP enabled.
@MohsinBhaiDesi2 жыл бұрын
Hi i don't found it verification code there only option for enable anf and disable how can i get it
@DCEDistributionSdnBhd2 жыл бұрын
hi, did u find any QR code sticker in your device?
@grassrootsfives2 жыл бұрын
@@DCEDistributionSdnBhd I have the exact same issue... No verification code is shown on the indoor station a a toggle enable/disable option... any ideas? there is no verification code on the back of the device either
@DCEDistributionSdnBhd2 жыл бұрын
@@grassrootsfives hi, please make sure ur device already online, verification code will not show if ur devices no online.
@grassrootsfives2 жыл бұрын
@@DCEDistributionSdnBhd thanks for the reply guys, worked it out in the end… the latest firmware doesn’t come with a preset verification code, you have to tap on the screen just to the left of the toggle switch to disable/enable and it then allows you to type your own verification code to use. Hope this helps others out there struggling to work it out as well
@endreszigethy57042 жыл бұрын
@@grassrootsfives thanks a lot, it works now. It must be a 6 digit code, 4 was not accepted to me.
@anahenriques88704 ай бұрын
How to I know the SIP password to register??? Need help please
@DCEDistributionSdnBhd4 ай бұрын
1. Tap Settings → → Configuration , and enter admin (activation) password. 2. Tap SIP Settings in Local Information Page. 3. Set SIP registration password. 1) Tap Registration Password. 2) Create a new SIP registration password and confirm the password. 3) Tap OK.
@swralas52292 жыл бұрын
Hello, what is the default password on the device?
@DCEDistributionSdnBhd2 жыл бұрын
the number you entered when you first activated the device.
Жыл бұрын
@@DCEDistributionSdnBhd how can I reset that password?
@bolajibigj42146 ай бұрын
To reset if you forgot the password u changed initially, go to their nearest office for default reset
@giorgiomaiolino11226 ай бұрын
ciao puoi fare un video su come collegare il mio citofono all’app grazie
@DCEDistributionSdnBhd6 ай бұрын
hi, u can watch kzbin.info/www/bejne/q33WdGCLf9Fqg5Y this video, start from 1:48
@giorgiomaiolino11226 ай бұрын
@@DCEDistributionSdnBhd puoi fare un video anche su come reimpostare la password del citofono?