How to configure WireGuard vpn on Mikrotik(RouterOS 7)

Hello everyone, Welcome to wire network.
This video guide will help you to configure wireguard vpn tunnel in mikrotik routerboard.
What is WireGuard !
WireGuard is a Virtual Private Network protocol and free and open-source software that implements encrypted virtual private networks, and was designed with the goals of ease of use, high speed performance, and low attack surface. It aims to be smaller and better performing than IPsec and OpenVPN, two common tunneling protocols.
Subscribe to ‪@Wirenetwork‬
Follow us on
Facebook - / wirenetwork.in
Instagram - / wirenetwork1
WhtasApp Channel - www.whatsapp.c...
#wireguard #vpn #mikrotikrouter #networking #mikrotiktutorial #wirenetwork #wireguardvpn #routeros7 #fastvpn

[@silverismoney]

Perfect. Worked first time. Clear and simple. Thank you.

[@Wirenetwork]

You're welcome!

[@brave.circassian77]

thank you very match. great story!

[@GrayMannGraymann2022]

Hello, I have a question, How to configure WireGuard VPN with 2 peers such as a laptop and android phone on Mikrotik router

[@Wirenetwork]

Add another peer on mikrotik

[@GrayMannGraymann2022]

@@Wirenetwork Hello I added another peer to the wireguard interface, I got the error "listening port is already in use" I'm still new to this aspect of VPN setup could you post the setup instructions for better clarity? Any and all help is greatly appreciated.

[@Wirenetwork]

Your question is intresting, i am make a video on this.. thank you brother

[@tommyking626]

​@@GrayMannGraymann2022you dont need to specified endpoint/port in server wireguard. Just client one, and makesure the allowed ip is right (not overlapped)

[@alltechhobbies]

hello, how can I access to winbox routerboard after established the vpn tunnel? Because with pc now on another subnet

[@Wirenetwork]

You can Access with help of Router static WAN IP address

[@alltechhobbies]

@@Wirenetwork do you mean PUBLIC IP WAN of internet connection? How can I give a static Ip to Wan ?

[@Wirenetwork]

@alltechhobbies you need to buy from you ISO

[@alltechhobbies]

@@Wirenetwork if I change 0.0.0.0/0 to 0.0.0.0/1, 128.0.0.0/1?

[@patek5035]

can you create a video for IKEV2 on Mikrotik? Thanks

[@CzAerox]

I wonder what to do, if public wifi is blocking "WG" like blocking UDP or something like that. Even using open ports did not made my device to handshake :/ Mostly airport wifi´s.

[@Wirenetwork]

Try to change default Port number of Wireguard...you can also use TCP protocol instead of UDP for Wireguard

[@user-yl9sn3pf3l]

Can you teach how to build Cisco with a server? vpn

[@Cheslyn-u1y]

Hi what if everything is configured and i move the router to another location will i still be able to connect to it from my pc where i set it up

[@Wirenetwork]

If your Mikrotik router WAN IP Address change, then you need to configured it again with new Static IP Address

[@antoniomax3163]

please tell us how to connect multiple remote clients to the same wireguard server? I have several clients without a Dedicated address (they are all for the nat provider). Only one microtick has a real address. I want to connect several remote clients to it and have them see each other. how to do it?

[@Wirenetwork]

Add multiple peer on mikrotik router

[@antoniomax3163]

@@Wirenetwork Can you make a video about it? When I make several peers, I make a mistake somewhere. The problem is that one feast only works, the other does not. In addition, both pens do not see each other. For example, the main pir (where my microtik has a dedicated ip address) is 10.0.0.1 and several clients. Let it be 10.0.0.2 and 3. So the problem is that only one of them is working and connecting. The other one responds to the pings with timeout.

[@NaEstradaComCristini]

Ola. fiz como ensinou, porem nao comunica o cliente com o servidor, parece q nao libera as portas..

[@Wirenetwork]

Configure Allow rule for Wireguard on mikrotik firewall

[@NaEstradaComCristini]

@@Wirenetwork consegue me passar essa regra?

[@NaEstradaComCristini]

@@Wirenetwork achei o problema.. meu provedor estava bloqueando todas as portas, mesmo eu fazendo os nat, solicitei liberacao e voltou a funcionar. obrigado

[@abby615cool4]

can wireguard bypass my ISP to prevent CGNAT in peakhours?

[@user-yl9sn3pf3l]

hi can you build secio vpn one server

[@kubectlgetpo]

No