Could we not expand this theory further into having one controller and one throttle operate 2 motors? The controller would need double the watt and amperage output since it would be split between the 2 motors but what else would be stopping that from working if both motors are the exact same specs?
@Zeus1stud3 жыл бұрын
doesn't work properly
@freshmaker53 жыл бұрын
@@Zeus1stud a bit slower but I’ve done it on a peg perego (stock) 24v rzr dual seat ride on. The stock board went bad, I replaced it with a real esc, variable speed pedal and it has worked fine. It’s even a bit faster. I bought a controller with twice the wattage of the motors. There is a motor going to each rear wheel (stock) Like a power wheels. I don’t see why It wouldn’t work on a razor toy???
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@A5h3n.5 ай бұрын
Cauld i use a 3 pin y split cable if I'm not comfortable splitting cables?
@deridionentertainment3 жыл бұрын
Can u do a different video actually showing your work because I couldn't see anything your camera was pointed at your tools then the wires
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@axelthorfilms4 ай бұрын
Does it matter which controller front or back and how about if the throttle has an on off switch will it turn off both? I guess I will find out now. Grin tech shows jumping the green or white neutral and negative.
@adamrule68403 ай бұрын
Does this work for Saili 25a controller? 2 1000watt hub motors
@billfranks68058 ай бұрын
Would of been good video if only he kept camera on filming the wires instead of it being out of shot at top of screen guess that's why professional camera operation is a skill
@jayg6044 Жыл бұрын
This guy must of not noticed the camera was facing the floor when showing connections
@caskagrossa51138 ай бұрын
If you show how to work will be better not just the snips. We don't see anything
@LouiePage-g1e Жыл бұрын
U do u clear vid please. Can't c what you're doing
@ferencfazekas29024 ай бұрын
A szép narancssárga szerszámokról már most mindent tudok?!
@donaldphelps65123 жыл бұрын
Thank for the video, can I do this with 36/48v hub , controller and battery with a 24v hub, controller battery, a. Not for full time use. I'll put a switch on the signal wire going to 24v.
@Zeus1stud3 жыл бұрын
should be fine
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@meboy35132 жыл бұрын
Nice video bro! Im going to be doing some nice projects soon!! 👍
@PhilleyPhlix Жыл бұрын
why would you not show what you are doing lol redo the video bra
@billfranks68058 ай бұрын
Thank you made my life a bit earlier now😅
@andquin14763 жыл бұрын
i just wanted to ask if you have ever measured for exposure to electromagnetic fields on any of the projects you have built ?
@Zeus1stud3 жыл бұрын
no
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@HaveWill3 жыл бұрын
Thank you for the vid. Could this be done with 2 batteries, 2 controllers and 1 throttle? 1 battery and motor controller for one wheel and another battery and controller for the other wheel and using 1 throttle? I am building an electric scooter and have this option available to me. Thank you in advance.. stay safe.
@Zeus1stud3 жыл бұрын
Yes
@Zeus1stud3 жыл бұрын
Also ElectricTIPS29 at Instagram Follow!!!
@HaveWill3 жыл бұрын
@@Zeus1stud thank you
@benm35749 ай бұрын
Well that was about useless you can't see what he's doing and he's just talking and what he's saying is not indicating what he's actually doing
@Jaybird9136 ай бұрын
I have no idea how to do this but anyone with a brain can understand what he’s talking about if they know anything about electric bikes /scooters
@rolleyrolley71922 жыл бұрын
I might be bit late. but how do I hook up dual controller 48v +72 v to switch between. when pulled over by police switch to 48v then back to 72v for delivers
@philliptaylor32312 ай бұрын
😮🧐🤯💨👍🏾Thats gamme.. . |😏
@THEPAINOFITALL Жыл бұрын
Can see what u did…lol 🤣
@donaldphelps65123 жыл бұрын
Thanks for the help. Can I use a battery on each controller or do have to use 1 battery on main controller
@Zeus1stud3 жыл бұрын
both ways work
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@markregan61332 жыл бұрын
I've got a feeling your using the frame as negative ground. There has to be some way both controllers see a common negative for the signal to be sensed by the second controller.
@Zeus1stud2 жыл бұрын
No
@Dlogreen10 ай бұрын
signal wire is sending a variable voltage and they share a battery pack, therefore they DO share a negative in that sense. IF they were on different packs, then both the negative and signal would need to be connected
@ruflasto19 ай бұрын
That is correct my friend. Nice to see some one who knows what they are talking about..@@Dlogreen
@nimez80683 жыл бұрын
hey man! I'm beginner so sorry bout simple questions but I'm about to get Ebike with 250w rear hub motor (All they sell in major stores in Europe) Battery is 690 Wh (48V 14.4 Ah) www.kuntokauppa.fi/fitnord-ranger-300-sahkomaastopyora apparently the controller is integrated to battery frame and I'd like to get additional front hub motor like 500W-1000W with additional controller. So is it possible to use that single 690Wh battery for both engines and I'd like front motor to be with throttle only. (This bike have only torque sensor pedal assist) So like when I feel like I could boost speed with front engine while rear motor. is running.
@Zeus1stud3 жыл бұрын
ElectricTIPS29 at Instagram Follow and DM me
@nimez80683 жыл бұрын
@@Zeus1stud done!
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@kweshinz21032 жыл бұрын
How would this apply to a 6 wire setup? Both throttles and controllers are 6 wires...any idea what wire to use?
@michaelkhobbs7413 жыл бұрын
No Hocus pocus mumbo jumbo just blunt show it LOL thank you right on I'll share this.
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@ShivaSharma-zs6gt Жыл бұрын
You said positive negative and neutral so where did the signal wire come from?
@raiden91296 ай бұрын
the "neutral" is the signal wire I believe
@BunkerBlog3 жыл бұрын
Helpful video. Thanks for uploading!
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@MrTimjwilson Жыл бұрын
Good view of your tool handles
@bige15603 жыл бұрын
Hey brother I love your video but I have a quick question how can you connect 2 Motors to one 3 speed switch
@Zeus1stud3 жыл бұрын
1to1 2to2 3to3..... also seekzbin.info/www/bejne/bqi6omCZqZ2fp6M
@Mac1812 жыл бұрын
I’m trying to get a E bike but there to Expensive and I’m afraid if I buy a kit it’s gonna be a cheesy motor amd waste of money wat would you Recommend wanted to be fast
@boostercontrol1003 жыл бұрын
Hey man great video!! I tried to do this it worked at first why bike in the air then stopped working I can't figure out why any ideas? I have a 2wd mongoose malus build.
@Zeus1stud3 жыл бұрын
check throttle...they go bad
@boostercontrol1003 жыл бұрын
@@Zeus1stud thanks bro will do!!
@Zeus1stud3 жыл бұрын
kzbin.info/www/bejne/bqi6omCZqZ2fp6M
@Zeus1stud3 жыл бұрын
Also ElectricTIPS29 at Instagram Follow
@chriswf Жыл бұрын
What was ultimately the issue?
@opaopao21336 ай бұрын
I want to build a quad bike with four motors , one on each wheel , but would I just need to connect all four speed controllers up to the one Throttle?
@Hawktok3 жыл бұрын
I wish you aimed the camera at the wires and not the floor. This info is so hard to source properly on KZbin
@Zeus1stud3 жыл бұрын
Go see part 2 much better and more info!!!
@Zeus1stud3 жыл бұрын
Also ElectricTIPS29 at Instagram Follow
@Hawktok3 жыл бұрын
@@Zeus1stud I went to see it. I've been told by people that your meant to put resistors inline to stop back flow ect . Have you encountered any issues on the scooter? I'm converting a single 600w 48v to a dual motor 1200w 72v .
@Zeus1stud3 жыл бұрын
@@Hawktok no...never.....go see how many I built and drive daily on IG.
@Hawktok3 жыл бұрын
@@Zeus1stud what's the IG I'll give you a follow
@Sputz33 жыл бұрын
How is the battery life when you hook up two controllers vs just one controller?
@Zeus1stud3 жыл бұрын
better because of consumption of energy.... hit the gas way less and glide. ElectricTIPS29 at Instagram Follow
@Zeus1stud3 жыл бұрын
ELECTRICTIPS29 AT INSTAGRAM FOLLOW
@anio6865 Жыл бұрын
So I can just toss the other controller correct ? I dont need to hook it up at all ?
@el-rumbotastingroomapartme21812 жыл бұрын
Wow great video! That is exactly what I was looking for! this really puts the tech in the hands of the people as an ev motor is thousands but an amazon bldc is affordable and 2 or 3 connected on a chain is equal to an ev motor!! Thanks!
@Dpryvd2 жыл бұрын
This could only work if both units shared a common ground as it does when both controllers share the same battety. But for those that have independant batteries, wouldnt the grounds of both batteries need to be connected together in order for it to see the signsl from the throttle?
@johnsonandjohnson93142 жыл бұрын
Did u find out
@Dpryvd Жыл бұрын
@@johnsonandjohnson9314 - Not yet, Im still curious though!
@rsummers1974ify Жыл бұрын
Any one have the answer yet?
@fredred8371 Жыл бұрын
yes, it works if both share a common ground. i'm even running different voltages.@@johnsonandjohnson9314
@bluntblowing52963 жыл бұрын
What type of atv is that?
@Zeus1stud3 жыл бұрын
Electric Yamaha Blaster
@boscozoo12852 жыл бұрын
What about the water proof conecters can i do it with out cuting it
@amazeme45032 жыл бұрын
How is it better using two speed controlers.pl say?