How To Connect 2 Unit Co2 Jet Machine To 1 Pcs Co2 Tank?

In this video,i will show you how to set up 1 pcs CO2 cylinder with 2 unit CO2 jets,used MOKA SFX MK-C12 LED CO2 Jet Machine as demo,you can check the details with this model in our web site,www.mokasfx.com/mk-c12-led-co...
🕘Timestamps:
00:00 How to set up PCB board with led co2 jet machine
01:40 How to use dmx controller operate co2 jet machine with safety channel
02:40 How to connect the high pressure co2 hoses with T splitter
05:05 Set up the co2 cylinder with co2 jet cannon
05:55 After the gig,disassemble the co2 equipment step by step
I Hope you enjoyed this video - please thumbs it up if you liked it and subscribe for more videos.
Want to get more information with our company, check the web site:
www.mokasfx.com/
------------------------------SOCIAL-------------------------------
Instagram: / moka_stage_equipment
Linkedin: / mokastagefx
Facebook: / mokastageequipment
NEW HERE? Hi! My name is Jerry. I am an Expert with Stage Equipment, work at MOKASFX more than 4 years. I will keep posting new videos every month. Subscribe to my channel to get DJ Tips & Tricks, Tutorials, MOKA Stage Equipment Reviews, and some awesome SFX and Stage Lighting for your reference!
For Business Inquiries Contact to me at--
[e-mail]
Mobile/Whatsapp: [phone]
#co2jet #co2jetmachine #co2jetcannon

[@MmlawnService85]

This is Makein what kind t splitter you and the hose

[@rcknrollplayer]

Ty much for your reply. Thinking about a manifold splitter instead of a Y in case I add more devices any advice?

[@MOKASFX]

Don’t worry too much, the difference between them is only very subtle😁

[@luisangeldanielolvera423]

What would the programming be like to activate 1 and 2 and both at the same time?

[@MOKASFX]

Just set the address codes of the two machines to be consistent

[@JETUpbeatRGv]

I need that t connector

[@dhemydee4621]

hello nice product, does the positioning affected co2 burst?

[@MOKASFX]

Of course it will not be affected. We have many styles, including upside-down models, adjustable angle models and shaking head models, etc.

[@dhemydee4621]

@@MOKASFX and one more question sir, how much PSI/BAR of CO2 for this device to work properly?

[@MOKASFX]

@@dhemydee4621 The maximum pressure of this machine MK-C12 is 1400 Psi, and it can be used below this pressure range. We also have a H-C03 with a maximum pressure of 1600 Psi.

[@kashawndjboogyharris2648]

Where can I order the hoses from? and the T splitter?

[@MOKASFX]

You can go to our official website mokasfx.com to consult customer service, but pay attention to whether your machine matches our accessories

[@studzain2679]

Hello..Thanks Buddy but I have one question can I play 4jets at a time in Dmx???

[@MOKASFX]

Sure,Connect the signal of the machine, switch the machine switch to the "DMX" file to achieve series connection, and control multiple machines at the same time.

[@luisangeldanielolvera423]

I have two jets and I play them at the same time but I want to play them separately on the same dmx

[@hammer6212]

what are the sizes of all these pieces and connections and of a tank

[@MOKASFX]

Hello, you can consult our customer service on our official website🥰：mokasfx.com

[@Adrenalinez06]

Can you operate these manually without a dmx controller? Do they come with a button or something?

[@MOKASFX]

Of course, when the machine switch button is in the "on" gear, just open the gas cylinder and the machine can spray directly

[@Adrenalinez06]

@@MOKASFX ok, I just want to be clear because I’m looking at purchasing a few of them, can they be linked together, and all of them set off at the same time with a single switch if they are linked through dmx cables, but *without* a dmx controller? Do they come with a fire button ?

[@MOKASFX]

@@Adrenalinez06 In this case, you can buy a power cord with a button, all the power of the machine are connected in series, turn the machine to the "ON" gear and connect the gas cylinder to ensure that the gas cylinder is in the open state, when you press the button, all the machine will be powered on at the same time to achieve the effect of spraying together.

[@MOKASFX]

@@Adrenalinez06 If you want to know more details about this machine, you can add me on WhatsApp: [phone] or go to our website bit.ly/3tg77Zi

[@drj-djrohitjaipur154]

Which gas i can use brother in this jets

[@MOKASFX]

We are using a CO2 cylinder, which contains CO2 gas

[@miguelgarcia6727]

Does the co2 needs to be upside down

[@MOKASFX]

No need, just put it on the floor

[@myrtlebeatsdj]

you need a Syphon Tank it has a tube in it so you won't have to turn it upside down

[@user-er2uu2eg2o]

So are both jets connected to the same channel? And if so, everytime you turn them on & off do they stay connected ?

[@MOKASFX]

Of course, you can connect them in series through the dmx signal to achieve multiple machines spraying at the same time.

[@user-er2uu2eg2o]

@@MOKASFX Also do you know any Control boards you can get that can use Fog Jets & spotlights ?

[@MOKASFX]

@@user-er2uu2eg2o You just need to make sure that both machines are equipped with DMX compatible interfaces or devices, and that your console has enough DMX channels, depending on your setup and programming.

[@mikesmith8959]

Please begin selling accessories to connect 4 of the machines together.

[@MOKASFX]

maybe in the future

[@mikesmith8959]

A 4 head manifold.....to allow a 50 lb tank to come in as one line and be distributed evenly to four different cannons at 1 time.

[@MOKASFX]

@@mikesmith8959 I know,but with 1 CO2 cylinder to 4 co2 jets,it will run out soon,and the pressure not enough,the spray height maybe is lower than expected. We normally recommend clients do 1 CO2 tank with 2 co2 jets only

[@namdeveventjbpm.p7726]

@@mikesmith8959 how to connect 4 unit co2 jet to 1pcs co2 tank... pls tel mi

[@shabregantt5051]

Will I need power ?

[@MOKASFX]

Yes, but the machine power is not large.

[@JETUpbeatRGv]

Where can i purchase?

[@MOKASFX]

may i know your whatsapp number?

[@sahilsaini3980]

Bro what is the price?

[@MOKASFX]

To learn more, pls initiate a chat via the website mokasfx.com

[@namdeveventjbpm.p7726]

how to connect 4 unit co2 jet to 1pcs co2 tank

[@MOKASFX]

Rohit Namdev Use the splitter

[@djrayasalsa]

What’s the name ? Of that connection ?

[@rcknrollplayer]

Why aren’t you using the pass-through on one to go to the other one? Why a ‘Y’

[@MOKASFX]

Both methods are possible, but there will be a slight time difference when connecting from one to the other, resulting in slight desynchronization, so "Y" is still recommended.