How to Connect LED Strip to Waterproof LED Transformer -L

[@ughWhy-up9tp]

Where do i buy those orange caps? I never seen those before please help

[@mrlamb621]

What if you have two sets of output wires? Do you just connect to one of them and leave the other one alone or does it need to be in some kind of series?

[@hakandenizsev810]

I have the same problem, how did u connect urs?

[@mrlamb621]

@@hakandenizsev810 Just use one set, the other is for an additional strip.

[@gustavotozzo]

Can this transformer be used naked (as is)?, I read they get really hot... won't it burn whatever is placed on?

[@opallennoch655]

Can I connect this directly to a wall switch?

[@lauraholmes9353]

you said to make sure the voltage is the same, but what about wattage? my strip lights are 50 watts, so do I need at least 50 watts for the transformer, or should it also be exact? Thanks!

[@GLLED]

The transformer needs to be at least 50W. We usually recommend using up to 80% of the transformer capacity.

[@sjwiz5991]

Where do i get the AC power plug to house the wires from the transformer?

[@GLLED]

You can find plugs in Home Depot, Menards or similar shops.

[@KEVINNOAD1]

You never showed which color wires ( yellow, brown, blue) input go to 120 volt white, black, and green ground ???

[@GLLED]

Yellow/green is the ground, Blue is the neutral wire which usually connects to white, and Brown is the live/hot wire which connects to black one.

[@XxmisskjxX]

How do you connect 5 Lee strip to one transformer?

[@andrewthomas7800]

Can I use 12v fans if rated less watts than led driver and less amps ?

[@GLLED]

12V LED lights will work, but not sure about fans.

[@lenamanh2012]

What do I do if I have a driver with no power cable attached to it?

[@GLLED]

You can use a power cord to connect to it.

[@ughWhy-up9tp]

I can’t find the caps

[@dillious_bankai1241]

Can you add a dimmer to this circuit

[@GLLED]

yes, you can add a low voltage dimmer between the transformer and the light.

[@RhugidLeeHansum]

How could you skip the entire part connecting the power plug?🙄

[@joshuadelisle]

if I want to power 20m of 5630 leds in the uk what power supply would I need?

[@GLLED]

Sorry for the late reply. At first, you need to know the power consumption of the strip light you have. Then calculate the total power needed as "strip light power consumption x length x 1.2".