How to connect wifi to GREE Air Conditioner 2024

[@dynosmail]

Finally done it. I've had to: stop mobile services on my phone, stop 5Ghz and backup 5Ghz connection on my router, set my 2.4Ghz band to 20/40 (default it was on 40) and it finally connected. Attempted this like 15 times so it works, it's just very specific and they don't say anywhere. Steps I recommend: 1. AC shut down 2. Router 5Ghz connection(s) off 3. Make sure that 2.4Ghz connection also allows 20Mhz 4. Press Mode + Wifi / Mode + Turbo on remote control 5. Open application and wait ~2 minutes and the hotspot will appear 6. Connect to the hotspot (if first time use default pwd displayed in the app) 7. After a few seconds (if all goes well) it will display again the wifi connections and you will need to choose again your 2.4Ghz wifi connection 8. Done. 9. If it fails at any step go back to step 4 and try again.

[@StuinOzzy]

Many thanks mate... this worked. What a POS

[@alawadhi3000]

Also WIFI encryption has to be WPA2 or lower, I had my router on WPA2/WPA3 and it won't connect

[@sergeikol5313]

Hi can you help me with step 2 and 3 . How you turn off 5ghz on your router? And how I know if it allows 20mhz? Thanks

[@sergeikol5313]

How I can change WiFi encryption?

[@MrDakti]

thanks for that comment, I did everything as you wrote, but unfortunatelly did not work :( after 2-3 hours of fighting I have no energy to continue, I got still the same error in the app: "SD10". I will try another day, Best regards. ps. Next day I set 2 more things and it worked finally: 1) 20 MHz only 2) 802.11g only (app version: 1.19.1 for iOS)

[@rezzsvk]

The key point is time 3:15 when you need to push Wifi on remote control which is not described in official guide.

[@dritonferatiofficial]

In the official guide it says to hold down MODE+WiFi while I press only the WiFi button you use both options.

[@rezzsvk]

@@dritonferatiofficial this is in the beginning. Im referring to 3:15 when app is searching for AC.

[@gingerlox1050]

@rezzsvk please help as it appears you are quite familiar with these units. I purchased a GREE unit with two handler‘s from Home Depot about 18 months ago but it was just installed in my cabin about six months ago. It is Wi-Fi capable. Because my installer indicated that it had the capabilities to expand to three zone I went ahead and located the exact same handler (model number identical) and we installed it in the other upstairs bedroom. So I have three zones all identical and that all have Wi-Fi capability. I installed the GREE app, set up an account, set up my Wi-Fi and it immediately picked up the very last handler that we installed which was the one that we added to the original unit. The original unit from Home Depot is definitely wifi and all three remotes have the wifi buttons. In the app when I click add to add another unit, I go through all of the prompts and it appears to be searching for the unit but even if I stand underneath it, it doesn’t pick it up. I can’t get the original two handlers connected. It’s definitely not the Wi-Fi Internet connection because the Wi-Fi Internet modem is downstairs in the living room and I can’t even get it to connect to the one that’s mounted onto the wall in the same room as the modem. It very quickly picked up and connected to the handler that was in one of the upstairs bedroom which is very far away from the Internet modem. I have tried the Troubleshooting tip of holding the remote control pointing at the unit and holding down the buttons until it beeps but nothing happens and nothing changes on the remote or within the app. What’s weird is even though only one unit is connected to the app all three remotes show the Wi-Fi icon on the screen. Batteries are all brand new. What is supposed to happen when you are in the app and you hold the remote to the unit and press the buttons for over five seconds until you hear the beep? Please I need some tips on getting these other two connected. For clarification mine is a 36,000 BTU 22 seers heat/AC unit. Thank you!

[@laszlofucs7963]

@@dritonferatiofficial How can connect the device to a password protected network?

[@peacefulplaces5647]

😘Thank you so much for giving knowledge, I do it done👍

[@stearless]

I managed to link the AC successfully, however the AC always appears offline in the app. When I first bought it last year it worked normally but ever since it unlinked itself I can't manage to link it again and make it work. Any ideas?

[@JC-ub1xn]

Can't connect. The process reach 99% and then gives an error. The error says to be sure i am on a 2.4ghz connection and to be sure the wifi password is correct. And of course i confirmed that and the result is always the same. My ac is a gree pular 2023.

[@AlexandrosGeorgiou]

Me too the same

[@kelle8379]

You are connecting on wrong netvork or you must turn off mobile data on your phone and connect your phone one same netvork like muse evo

[@Gozla21]

Reset ruter dont yse 5g network on home network. I speend 5h

[@Dylesse]

I'm having the same problem as well.

[@jorgetorresperez6231]

Did you solve the problem?

[@ruben.szabo_]

For me when it’s loading it stops at 69% and just says that my wifi occurs failed

[@ToniBadea16]

In my case it happens at 71%.

[@pawegradek5248]

kzbin.info/www/bejne/rGrGqIGcaNV9f8k

[@adamwagenhoffer6291]

same here, 69%

[@ruslankuziak5236]

Hi guys. Having the same problem on my Pixel 8. Did you manage to solve it somehow?

[@AyseDogan-qr6tg]

Aynı sorun bende var, 69 dam sonra olmuyor

[@danielenasetti9617]

With amber my problem is that it connects but just for a couple of second then it got disconnected again, I tried everything and the clivia one work fine any help?

[@shahinshah2442]

same issue did you found any fix?

[@danielenasetti9617]

@@shahinshah2442 the installer give me the Wi-Fi module of clivia model

[@erkocveti2010]

Finally Thank you very much

[@angelabelbalderasxico4800]

And if my control does not have the Wi-Fi button, what can I do? Since it is a recent model I await answers from you brother

[@sajedworld9658]

Press Mode and Turbo

[@tanzilayasminsohana8577]

I replied too

[@Bernard19979]

With it being Wi-Fi I take it as you can turn it on anywhere?. Thanks

[@shadmanhussain1928]

Yo bro after the loading occurs my wifi doesn't comes in the next option it just says no hotspot available and stays like that , any solution for this?

[@dritonferatiofficial]

have you stopped 4G on your phone, and try before you connect to WiFi, press the MODE+WiFi button again and when you press the air conditioner control, does the WiFi sign appear?

[@shadmanhussain1928]

@@dritonferatiofficial you mean to turn off my mobile data or directly change the 4g to 3g or other?

[@dritonferatiofficial]

No change, you just need to be connected to the Internet where the air conditioner is located!

[@shadmanhussain1928]

@@dritonferatiofficial hello bro iam already connected with the wifi of my home also the mobile networks are off, as I don't have the wifi button on my remote I reset it with mode+turbo (according to the app) all works perfectly but after it loads for 2 minutes nothing shows it says that "no hotspot available" really stuck in this, will really appreciate your help

[@dritonferatiofficial]

Hello, maybe you don't have the WiFi button on the remote control then your air conditioner doesn't connect. Has anyone told you that it connects without the WiFi button?

[@henryhenriquez1053]

I am able to connect it and all but once I use my phone to turn it on off whatever it goes off line … help

[@cristianirimia567]

Hello from Romania! In the house you can use the remote control... When you leave home, can you use the app on your phone to turn on the air or heat? Away Mode, with mobile data services only...🤔

[@dritonferatiofficial]

Yes, with the Application you can command it all over the world, normally you just need to have internet on your phone!

[@alexandrupruna8578]

Hi, did you get it to work? For me, it always errors with adding failed...

[@Pokolloko]

@@alexandrupruna8578 I have same issue. Maybe you figured it out?

[@alexandrupruna8578]

@@Pokolloko nope, not yet at least...

[@adicazacu4043]

@@alexandrupruna8578Ai rezolvat? Si eu am achizitionat un AC de genul si nu reusesc sa ma conectez cu aplicatia. Imi vede AC-ul dar tot da fail. Si am respectat instructiunile, wifi 2.4ghz cum zic ei.

[@eddiemiranda2343]

I live in Puerto Rico How do I proceed my Ewpe Smart stop working know either both doesn’t have Puerto Rico

[@Adzouz]

I don't know what's wrong. I followed all instructions (even all troubleshootings from the comments) but it never worked on my Google Pixel 8 Pro. I had to switch to my iPhone in order to make it work. I was connected to the right network (2.4GHz), 20/40 MHz, right encryption and ferquency etc but I think the issue is either related to my phone or the Android app. Such a shame that we're still struggling with those kind of stuff in 2024. Gree should definitely do something about it.

[@aleksandarbarbonelov5622]

Can I turn it on when I am outside of the house and not connected on the WiFi ?

[@danielemoncada8692]

hi, greetings from Palermo... how do you like the gree air conditioners? an installer recommended this brand to me but I don't know it, and in Italy it is rarely installed, what feedback can you give me? Thank you

[@amzadhossain7135]

It’s most popular in Bangladesh

[@danilie6742]

I have one since 2019, it worked without any problem. Once at 2 years I made a cleaning on internal unit - I called a guy with some foam and something else. I recommend GREE without hesitation.

[@alessio2184]

Prendili sono buoni io li ho da 8 anni nessun problema... tranne sta cazzo di applicazione sto sudando come un porco

[@CanvasExpose]

does this app only provide the On/Off function thats it?

[@dritonferatiofficial]

This application, in addition to the on/off function, has many other functions, for example, you can set it to turn on and off at a certain time and many others...

[@saadsleem5255]

Can I use the app when I am away . (Not in the house) to make it work before arrival to home .

[@goinge]

Yeah u can. But the app is quite bad and u have to reinstall it every 2 month.

[@oligertipjetri4077]

Thanks it was really helpful

[@dritonferatiofficial]

I'm glad that my video served you. Subscribe to my channel to see more videos!

[@Sabaaaification]

It always stops connecting at 69% for me,I don’t get it,what could be the problem?

[@oma238]

The same with me

[@MrDakti]

The same, 69% and stop. 1 and 2 year ago it worked with previous version of the GREE app. Maybe the problem is with the current version of the app. Always had problem with configuration, but this time it do not want to connect at all. It's so frustrating.

[@vklis175]

Try to change the name of your Router in order to have only letters and not any sumbols or gaps between the letters

[@i_youtube_]

Should phone and remote be connected to home wifi

[@GunnyPerrero]

How many aircons can you add? Is there a commercial option to remote monitor?

[@dritonferatiofficial]

I have no idea how many air conditioners can be added, but I have 6 air conditioners connected in my house, so they are enough. As for the distance, regardless of how many kilometers you are away, you can control it, as long as you normally have internet on your phone!

[@omega_hb4895]

I have Gree Split AC for the past 4 years. After sometime, it shows offline message and it's been like that forever. Gree support will NEVER reply. Also, I have Midea AC and it's perfect without any issues at all. Had to connect Gree AC using Sensibo Sky remote control. Does anyone have a clue how to fix this problem?

[@bbss5076]

adding failef :( , what is the problem,?

[@celineroberge1330]

It does not connect to my wifi. Tells me to connect to connect my mobile phone wifi to the following hotspots : GR-AC_XXXor a-f, 09 random combination. What does this mean ?

[@dritonferatiofficial]

When you hold down Mode+WiFi, does the air conditioner make a sound, try two methods to hold down Mode+WiFi until the air conditioner makes a sound, and the other time you keep it pressed until the WiFi signal is found!

[@abailey163]

@@dritonferatiofficial Mine didn't have a WiFi button, had to use Turbo and Mode

[@dritonferatiofficial]

@@abailey163 Ok and did it work for you? because it also depends on the air conditioner model!

[@abailey163]

@@dritonferatiofficial yes, it did. Took me a while to figure it out because it wasn't in the written instructions sent but I could see Wifi on the remote's display.

[@combatsports_2758]

@@abailey163 WHATTTT HOW DID U DO IT PLEASE ELP MINE DOESNT HAVE WIFI BUTTON BUT THE THING IS SHOWING IN THE REMOTE AND WIFI NAME WOULDNT SHOW UP IN THE APP HELPPP

[@ubening]

Hej, Thanks for video, is it possible to connect two devices ( phones ) on one gree ac ? Cant find information about that anywhere 🙆🏼‍♂️

[@martinplamondon7303]

I'm having the same problem

[@ramish._xo]

Helpfullll🎉🎉🎉🎉

[@gismoscherer]

my app does not show the available wifi networks.... I stuck!

[@pawegradek5248]

kzbin.info/www/bejne/rGrGqIGcaNV9f8k

[@aichaamara392]

Mines doesn’t have a WiFi button

[@tanzilayasminsohana8577]

Use turbo + mode

[@Aleksss_Catan]

Thanks for the video! I am thinking about buying this one and i have a question: Is it making noices when it is cooling/heating or is it quite silent??? Thanks!

[@dritonferatiofficial]

Hello, the noise or air of the air conditioner does not change either cooling or heating, but it can make more noise when you increase the heating number or when you decrease the temperature cooling number. Otherwise, you have the sleep button, it makes less noise. and used while sleeping!

[@Alex.tg07]

Hello driton i cannot get my hpone to register my name. It just says name is registered and i cannot continue

[@dritonferatiofficial]

For the name, you should try to make changes. For example, two letters that are the same, and a capital letter after the password, otherwise the account will not be opened.

[@Alex.tg07]

Thanks i managed to do it

[@ritataliana4052]

Can I use it out from home , pr the app just a normal remote to the a/c .... I need something to switch on and off out of home because I have annimal home

[@dritonferatiofficial]

Yes, this application works wherever you want to be, you just need to have Internet on your phone.

[@HekuranEmini]

Gree Soyal 18BTU, spo me lidhet ne wifi pse?! Modelet tjera ne shtepi jane lidhe shume leht automatikisht, vetem soyal modeli spo me lidhet !?

[@A.R.M.Y_BANGTAN]

What should i do? Because my Remote doesn't have wifi button.

[@raii3623]

Mode + turbo for 10 sec

[@dairenymora1637]

Does the ac has to be on or off?

[@dritonferatiofficial]

It should be off, just press and hold MODE+WiFi it should beep!

[@hamzah_imran]

no wifi option on remote but rhere is x-fan so??no wifi option on remote but rhere is x-fan so??

[@UmmatiRasulullah-sn7xy]

When the Gree+ app is scanning to find out the AC hotspot, it shows "1 appliance is found", but when the scanning is 100% complete, it shows "adding failed". Please help to solve the problem.

[@walent88]

If someone finds a solution please let know

[@zulqarnainhyder7890]

same problem

[@pawegradek5248]

kzbin.info/www/bejne/rGrGqIGcaNV9f8k

[@norberth.9510]

Same problem..

[@bemo523]

same problem. i can see that the AC joined the wifi network, but the app says "failed" - i've tried at least 5 times now. any help appreciated.

[@gamepower3957]

Thank you so mach > thank you for your support❤❤

[@Itz_me_David_sta_ima]

How to make that air flow does not flow adter turning off

[@raizohaib7413]

Why about that ac which have mode+Turbo button . This method does not work on this type of ac.

[@dritonferatiofficial]

Because it doesn't have a WiFi connection and it doesn't work. When you bought it, did you ask if it can be connected by phone!

[@raizohaib7413]

@@dritonferatiofficial but on the remote of the ac the wifi option show and also on the gree app there is option 'remote without wifi button'

[@eternallymaze]

@@raizohaib7413same

[@abailey163]

wish you would go a little slower or talk through this. Also My controller doesn't have a WiFi button, Had to use Mode and Turbo. The hotspot connect was a whole different number, just luckily chose the right one and signed on with the 123pw

[@dritonferatiofficial]

Thanks for the suggestion, but you have it and in the settings you can make the video go slower. all the best

[@KeiGGR]

Thanks for this I had a hard time since I don't have wifi button as well. Now I finally connected it and also added it on Alexa!

[@double..5428]

How did you find the hotspot number on mine it says no hotspot found

[@abailey163]

@@double..5428 I started picking availables and put in the PW, It was a weird number/letter combo if I remember correctly. and it signed on.

[@chester3386]

Dont find the devices.what the problem?

[@Erox006]

after connecting , it shows "new device found" card , when i tap on it, nothing happens

[@saidakada2843]

Bjr je n arrive pas a connecté ma telecommande a ma clim aucum bip de reinisialisation😢

[@guizindainguicacriancanapr7365]

thaaaaaanks

[@tanzilayasminsohana8577]

If you have wifi button use wifi + mode if you don't have use turbo + mode

[@TRLGuy]

Not working… 69% and stop. Sd10 error code.

[@mahmoudalazzeh3901]

Same here , were you able to fix it or not yet?!

[@MartinzW]

@@mahmoudalazzeh3901 same

[@vklis175]

I changed the name of router in order to have only letters not any symbols.The tough thing on that is that you have to connect again all your devices with you router.

[@opiae]

Terrible shit app that can't connect everything done by the book it keeps poping out erors finds device then SD10 eror ,or Ly04 eror

[@aldin80]

Hello ,how i know model name of GREE I have IU gwh12acc-k6dna1f/i and OU gwh12afc-k6dna2f/0

[@abailey163]

I choose the first one and typed in the 123pw and it worked

[@aldin80]

@@abailey163 how?

[@abailey163]

@@aldin80 click on the number that comes up under hotspots and type in the 12345678 pw

[@bonobonoyaah4684]

My gree ac remote doesn’t have wifi button

[@695goran]

I am trying to connect Gree Charmo artic pro 2. I have made all tne neccessary steps, i changed the channel width to 20 mhz, i have turned off 5g in my router settings and still nothing. It comes up to 69 % when connecting the device. Then it stops and says ,,failed to connect to device - error code (LY02),, Can someone help pls? Spent over 3 hours -_-

[@JadaDeveloper]

doesn't work with Iphone

[@double..5428]

Bro on my remote there is turbo and mode function to reset even after that i cannot connect it says no hotspot available What should i do?

[@Waleed-nx2px]

Thank you it work good

[@matildagori7473]

seems like they changed the app, and it fails me to connect to the wifi anyway, idk what to do (ofc the wifi is on 2.4 GHz)

[@pawegradek5248]

kzbin.info/www/bejne/rGrGqIGcaNV9f8k

[@furrendokellersmith]

Se kuptoj kam modelin ch-if071rk edhe sme lidhet car ti bej

[@dritonferatiofficial]

Un sa e di edhe ki kondicioner CH lidhet me GREE,por kur shtypni Mode+WiFi a jep zërim kondicioneri beep? Provoni dy metoda mbani shtypur deri sa të jep zërim kondicioneri dhe provoni mbani shtypur deri në gjetjen e WiFi-së. Por lidhja duhet të bëhet me WiFi-në e shtëpisë jo me 4G!

[@furrendokellersmith]

@@dritonferatiofficial Kondicioneri e jep beep-in por ne GREE+ nuk del emri pas 2 min. Une e pash kete si tutorial, sepse kondicionerin e kam C&H po pulti eshte model GREE

[@dritonferatiofficial]

Nuk di çfarë të them tjetër pas zërimit duhet të gjej WiFi,mirpo tek telekomanda a po e qet logon e WiFi,dhe kondicioneri a është afër WiFi që të kap valë.

[@A.vandenHout]

Is it possible to connect two devices? It is now on an android phone. I need it too on an IPhone,

[@saghariqbal7607]

But bro my remote doesn’t has wifi button💀

[@milciadesrd714]

How do I add it in Alexa? Do you have an updated video tutorial? Greetings and thanks

[@dritonferatiofficial]

No, I don't have any videos with Alexa even though I made a connection, but unfortunately I didn't make a video!

[@milciadesrd714]

@@dritonferatiofficial Thanks anyway I was able to connect perfectly myself with Alexa

[@maximme]

the exact SAME function as the remote, nothing else?

[@stukeast4970]

Cannot connect Device error - here is what you need to do 1. Disconnect from 5Ghz and connect your phone to 2.4GHz on your wi-fi router. 2. Do the Reset as instructed 3. The app will then show the device as a Hotspot (wif-fi connection) on your phone networks 4. Connect to it - default PW is 12345678 - there is no internet access which is fine. 5. Go back to app- it should be connecting - it should tell you to connect to your 2.4Ghz connection (as per step 1) 6. Go to your Networks on your phone and connect to your network 7. Should now have added the Device.....

[@zewilson140]

I am stuck in password for wifi... where can i get password to GREE Air Conditioner?

[@cirilocampos5793]

Também estou com essa duvida

[@Bandar1972]

Thanks a lot

[@el_heizenberg9172]

Terrible app. Doesn't work at all

[@salmanqadir4081]

I'm stuck at the country

[@martinplamondon7303]

This app is a disaster appreciate the video

[@drafer66]

No, no. Sometimes works 2-3 days and after that not work. Gree is cr*p

[@eternallymaze]

I cant find any hotspot after waiting 2 mins, pls help

[@dritonferatiofficial]

When you press Mode+WiFi does the air conditioner beep? and where is the air conditioner located, does it catch WiFi waves, also on the phone you must be connected to WiFi and not to 4G/5G !!! That's it for connecting to your air conditioner.

[@Habeel13]

Even after adding the splits, after some time I am unable to access the splits at all, saying network request time out

[@rosarioenergiasolar8106]

o meu controle não tem esses botões

[@tanzilayasminsohana8577]

Use turbo + mode

[@tufailgop6085]

Kya aap goongay hain?

[@AyseDogan-qr6tg]

6 gree klimam var alt katta 2 üst katta 1 tanesini bağlayabildim! Kötü!

[@LauraMiller-z4u]

Rodriguez Helen Smith Timothy Brown Maria

[@LauraMiller-z4u]

Martinez Anthony Martinez Richard Anderson Michelle

[@ykhdmovies9457]

Hello

[@ZollMisc-c1w]

Harris Paul Robinson Robert Allen Mark

[@MuhammadHamdan-nr8js]

AC contro enviro

[@Da_ambient1]

This is just a waste of time

[@dritonferatiofficial]

Why?

[@pawegradek5248]

kzbin.info/www/bejne/rGrGqIGcaNV9f8k

[@drafer66]

@@dritonferatiofficial Because this shit not works last 2 years

[@adrianasoares5850]

Ei vc e mudo é

[@nikolcemarkovski7380]

No, it is useless, the app, what a joke gree...

[@dritonferatiofficial]

Why can't you connect or what's the problem!

[@nikolcemarkovski7380]

@@dritonferatiofficial it was connected on wifi, but i've changed the wifi router so i have to reconnect it but with no success after trying for 3-4 hours...

[@nikolcemarkovski7380]

Camera? Which camera?

[@dritonferatiofficial]

@@nikolcemarkovski7380 Open a new email again, and try from the beginning.

[@vicente2472]

My wifi unit does not appear =\ I have the YAN1F1 control.