How to Create Beads

Рет қаралды 18,988

Күн бұрын

Пікірлер: 49

@silviaverzilli8545 2 жыл бұрын

Thanks for this video, it's very useful. I have a question and I hope you can help me: when I change the value of "Add'I Thickness Rendering" to 100 in "Simulation Property", the circle doesn't become a sphere. Why? I can't go on.

@CLO3D 2 жыл бұрын

Check to make sure you have "Thick Textured Surface" select in the 3D Toggle Menu.

@silviaverzilli8545 2 жыл бұрын

@@CLO3D Thank you so much! It's working! 😁👌

@CLO3D 2 жыл бұрын

@@silviaverzilli8545 Yay!

@duhoang9147 Жыл бұрын

Thank so much. But I have a problem that after adding the obj file, the bead shows up, but in the Property edittor panel, it doesn't show the Specification line to resize, but only the table from the material line down. So when I want a smaller type, I have to add another odj file and adjust the scale in the add frame, it takes too much time, can you help me?

@CLO3D Жыл бұрын

Hi Du Hoang When you bring in an OBJ as just a trim you will have to resize it in the 3D window by clicking on the scale box (upper right corner of the Gizmo next to the glue bottle) or go to the Trims tab in the Object Browser > Select the Trim > adjust the scale in the Property Editor below. Also, You can easily select the Trim in the Object Browser and then click Copy in the upper right corner. This will allow you to create as many different size versions as needed in the project. Similar to how a BOM works

@catarinavale17 11 ай бұрын

Hi, when I apply my texture, I get a very defined otline on the texture. How can I improve that? I screenshoted the texture from the video and cut the outline

@CLO3D 11 ай бұрын

Hi. A screenshot is likely lacking in definition and is not seamless. You may want to find your own texture that you can download directly

@mahtabseyedi2270 Жыл бұрын

So good. Thanks

@StudioAtalaya 3 жыл бұрын

Thank you for this video ! I just have a quesiton, when i add 100 of thickness, the bead doesn't appear like a perfect sphere, it is kind of flattened on the sides and I can't get it very round ! Would you know why ? Thank you so much !!

@CLO3D 3 жыл бұрын

The key to this technique is the size of the pattern piece you use, the Additional Thickness Render you add and the percentage of the Curved Side Geometry.

@xinyaoyi3233 3 жыл бұрын

I created an ellipse then changing the thickness rendering followed the video, but my ellipse was flat in 3D. Help please.

@CLO3D 3 жыл бұрын

Check the 3D Toggle Menu and make sure you have Thick Textured Surface is activated. (the blue fabric icon with white edges, NOT the fabric icon that is blue on one side and white on the other.

@kristynykilchuk5337 3 жыл бұрын

@@CLO3D Im having the same issue in 6.1. The Thick textured surface is activated. Doesnt work in 3d window or rendering

@CLO3D 3 жыл бұрын

@@kristynykilchuk5337 If you are on Textured Surface your fabrics will have a dark back side. If you are on Thick Textured surface the front and back look the same. Depending on the Fabric, the thickness will vary.

@minnatansari7198 4 жыл бұрын

Great video...but improve this to faster like we add graphic repeat as tile pattern for all-over..hope you understanding my point .......thanks

@CLO3D 3 жыл бұрын

This is now in the current version!!

@PINK_DESIGNER 2 жыл бұрын

Great, thanks for your tutorial !!

@CLO3D 2 жыл бұрын

You are welcome!

@TheNSproject 3 жыл бұрын

Awesome!! May I ask where can I get the bead texture?

@CLO3D 3 жыл бұрын

Just search for "mother of pearl texture" online.

@ksushakorinovska7284 2 жыл бұрын

Hello! Thank you for this information! But I have a problem with importing or exporting..I don't know. When I'm importing as a trim the texture of obj is shifting and I can't edit it..

@CLO3D 2 жыл бұрын

Did you create the piece in CLO?

@ksushakorinovska7284 2 жыл бұрын

@@CLO3D yes! But yesterday I tried to do a diamond with texture as .png and displacent map as .png and it works good:)

@Humanhumanity1469 2 жыл бұрын

This was very useful tnq

@CLO3D 2 жыл бұрын

Welcome 😊

@habanalibre1139 4 жыл бұрын

Will this work with animation?

@sachinpoddar3912 4 жыл бұрын

i have same question

@CLO3D 3 жыл бұрын

Trims will work with Animation.

@maryestheranimate4370 2 жыл бұрын

I wish there's a way to make this glow

@CLO3D 2 жыл бұрын

You can change the Material Type to "Light". This will only show when you create a Render.

@lequeeta 3 жыл бұрын

I loved finding your video. Thank you! but I ran into a problem, I have searched all over the internet to find the solve, but with no luck. hopefully you can help me. I made my beads, glued them on my poncho following your video. But when i simulated they all fell off and my poncho melted off the avatar. Help Please

@CLO3D 3 жыл бұрын

You must add the beads as a trim. And before you run the full animation, click the camera icon over the timeline and this will simulate the garment on the avatar as it moves. THEN you can play the animation and save the recroding.

@maybeknot Жыл бұрын

Sorry, it's been a long time but I have been testing this tutorial and I have found that, by default, my beads weighed 128kg each. Once changed to 1g each (you can modify it on the Property Editor) it works like a charm!

@mckingbrand 4 жыл бұрын

Hey guys I have an issue. My trims won’t show up in the render display and it’s been something that I’ve been trying to figure out for weeks. How do I make the trims that I download from the clo shop show up when I render it as it is working on the 3D display but not showing up at all when I render it.

@CLO3D 4 жыл бұрын

Try chaning the Render Properties to GPU (Cuda). Open Render Window and click Render Properties (on right/end area of render toolbar). Change Render Engine to GPU (Cuda). Some elements might not show if your computer is rendering off the CPU only. This might help your trim show in the Render window.

@mckingbrand 4 жыл бұрын

Ahh thank you so much for the help it worked really appreciate you guys and these amazing videos are so helpful !