How to Create LULC using ArcGIS/ Supervised Classification and Calculate Area of LULC

Classifying Landsat 8 image to make a land use land cover map.
Download Free Very High Aerial Imagery 0.5 meter, SRTM DEM,sentinel-2, Hyperion, LANDSAT-8 & Aster
• Download Free Very Hig...
How to calculate land surface temperature from Landsat 8 Satellite Data
• How to calculate land ...
How to Create LULC using ArcGIS/ Supervised Classification
• How to Create LULC usi...
How to Create coronavirus Map in ArcGIS !! Health GIS
• How to Create coronavi...
Generate Contours and Slope From Google Earth in ArcGis
• Generate Contours and ...
How to delineate watershed using DEM
• How to delineate water...
Digitization in Arc GIS
• Digitization in Arc GIS
georeferencing and projection
• georeferencing and pro...
Download Very High Resolution Google Earth Image//Georeferencing in ArcGIS
• Download Very High Res...
Goodbye My Dear
• 'Goodbye My Dear' by @...
Relaxing Background Music For Videos, Meditations, Yoga, Spa - by AShamaluevMusic
• Relaxing - by AShamalu...
Any Help Contact
Mr.Vikas [e-mail]
WhatsApp Number= [phone]
Email.Id:- [e-mail]

[@ishthiaqshaik1083]

JUST TO ADD WE CAN DO AREA CALCULATION AND PERCENTAGES IN ARC MAP ITSELF IF WE CAN DISSOLVE THE CLASSES AND MERGE THEM AND CALCULATE GEOMETRY MUCH EASIER THAN USING EXCEL

[@vikasghadamode]

Yes we can do it from this way also

[@Muslimviews786]

Good sir

[@ashieashly241]

very informative but the picture quality😭😭

[@minhajqureshi2425]

Sir when I extract by mask....it gets cancelled again and again

[@vikasghadamode]

Try to keep your output folder by default after extraction you can export that extracted image to desired folder

[@minhajqureshi2425]

@@vikasghadamode ok thank you sir

[@devaspathak5288]

I keep getting Error 010108 - no. of bands in signature file is less than no. of bands in raster dataset. and Error 010067 error in executing grid expression . What is the possible solution for this?

[@shalweesingh7120]

Same issue Any solution?

[@devendersinghbartwal2121]

How can i extract my study area from LULC map downloaded from Bhuvan site. Regards

[@maryamsami6969]

This is the very first time i comment in any of the video. This video just save my life aka assingment just wants to know a littel more how can i adjuct the excel table on my map layout please guide me a little more Jazak Allah😇

[@vikasghadamode]

Okay I will make video on this topic

[@knowledgeis_power]

So informative for a fresher in GIS.

[@Ashishsingh-zo9os]

When I make FCC it is showing image only in black nd few shades of white....kya FCC me red green blue hona jruri hai ya black nd white bhi shi hai ya kuch error hori mjhse FCC generate krte hue?

[@kapilbhuria9313]

hi sir i am learning gis am i am new to this. i want to learn to prepare landuse map. pls guide me to find a tutioral video. further sample manager tool is not showing in arcmap

[@tharjun9447]

hello sir after classification some water bodies pixel comes in vegetation pixel . how to correct it ..pls reply sir

[@vikasghadamode]

@@tharjun9447 You need to provide more training samples on please where vegetation showing water bodies, add more training samples of vegetation

[@abebawzeleke8882]

Thank you for your nice video. How can we prepare LULC map so that people easily understand.

[@vikasghadamode]

If you watch full video you will understand it is easy to prepare map and easy to understand LULC map based on different colours

[@balanmohan1409]

sir, can suggest me any video or website that explain why we are choosing particular lansat image for lulc classification

[@vikasghadamode]

You can choose Any other images like LISS III or Sentinel 2 for LULC

[@davidowuor6317]

Hello. Thank you for this helpful video. Do you have the same for Landsat 3 and 5? Please

[@vikasghadamode]

Same process for Landsat 5 just need to take first 5 band for band combination

[@creative.soul.]

I can't add my study area in lulc dataset. Both file shows in different layers what i can do sir plz reply

[@vikasghadamode]

Might be projection of both file is not similar

[@ashwinib8344]

I am getting error in maximum likelihood classification It is not generating How to overcome this

[@vikasghadamode]

What error is it showing while doing classification

[@tasnimhanan2524]

My signature file is shown "created failed" i.e it can't be saved. what is the solution?

[@vikasghadamode]

Try to save on desktop

[@astra4429]

sir can you tell me why that image classification tool isnt activating.

[@vikasghadamode]

@@astra4429 Go to customize select Extension then select spatial analysis tool

[@aschalewdukele2891]

any tutorial to create lulc using arc gis that when image is taken from google earth !!thank u

[@cuisinebyadan7517]

awesome bro... you explained very well... hope this same worked for me too

[@ngabonzizathierry-jd3ku]

how to make a bar chart according to the percentage?

[@PratikSawant996]

Sir i am not able to operate my image classification option. Its not working.. It is still not activated though after clicking on it. Please guide me. Thank you

[@vikasghadamode]

Go to Customize click on Extension then select Spatial analyst tool after that your Image classification tool will activate

[@PratikSawant996]

@@vikasghadamode Thank you so much sir.. It is working

[@kunaldeo1725]

PlZ make video on flood risk mapping of kolhapur

[@subhamnag2606]

i am complete band composition but classification option are not open. How it's solve?

[@vikasghadamode]

To activate your classification tool Go to Customize - Extension and then select Spatial analyst tool

[@bindus-q4b]

Hello sir..How many classes can do in 30mt resolution images..

[@vikasghadamode]

It's depends upon how many classes you are able to interpret

[@Raj_5GB]

Very helpful video sir ☺️

[@dewonlow946]

I wonder why u using Image Classification under (Band_comp) layer BUT not your (EXT_SA) layer ???

[@vikasghadamode]

I have taken Training sample only in EXT-SA only

[@dewonlow946]

@@vikasghadamode ok got it, means image classify it on the extracted study area

[@GurnamParsad]

Superb. Thank you so much. I did the same procedure but the features are not smooth, they are sharp.

[@kilthansulthan]

Thank you Vikas for making a lengthy video. Can you explain why there is an area gap came when you converted the output from Raster to Vector? You can notice it in RED COLOUR at the moment at 19:42 of this video.

[@balanmohan1409]

Sir, after taking signature it show failed to create signature file. what should i do?

[@vikasghadamode]

Save signature file on Desktop

[@balanmohan1409]

@@vikasghadamode sir, tried that one tooo. show message failed to create signature file

[@SaibaShafi]

sir, in training sample manager step, while drawing the polygons for image classification, how do we know that the red colour is agricultural land and blue colour is build up area.

[@vikasghadamode]

Please read about band composite of landsat 8 data..

[@SaibaShafi]

@@vikasghadamode okay thank you sir.

[@oleksinung6682]

When I tried to save signature file in particular folder it's showing failed to create but save in desktop and when I tried to classify sometimes error results showing classes value less than 1 and sometimes same training sample only classified 1 or 2 classes although I'm create 6or 5 classes why?

[@vikasghadamode]

You need to take more training samples in each land use classes

[@oleksinung6682]

@@vikasghadamode My study area is Mountainous region and there is a lot of shadow and less no. of built-up are and agriculture so the Color these 2 and barren land are similar because of that I only take 2or 3 sample these 2 class to avoid the misclassification is there any solution for this Sir thank you in advance

[@vikasghadamode]

@@oleksinung6682 You can share your image screenshot me on WhatsApp or email details is given in discription box

[@oleksinung6682]

​@@vikasghadamodeOkay I will mail you thank you sir

[@oleksinung6682]

​@@vikasghadamodeSir I mailed you please check

[@neelamtargotra6039]

Thank you so much sir, you explain it very simple way .

[@najamzaheer009]

i have problem in extract by mask. whenever i used this tool the extracted area would be blank everytime any idea?

[@vikasghadamode]

kzbin.info/www/bejne/ZmalmaZuiZKWY7s

[@vikasghadamode]

After Extract by mask check Stretch type

[@najamzaheer009]

@@vikasghadamode thanks now it work

[@chetans754]

what if i have to download a 5-6 files from earth explorer, because my area is big, how to move forward then

[@davejalpesh4530]

Thank you so much sir, This is very use full video.

[@parama77]

Extremely grateful to you for such a detailed video. I am facing a small problem while using the extraction by mask option. Could you please help me?

[@vikasghadamode]

What problem you are facing while Extract by mask

[@omshete6759]

Same prb we can't extract

[@omshete6759]

Can u give me your No sir I want to clarify my doubt

[@vikasghadamode]

@@omshete6759 Check in the Discription box details is there

[@Ashishsingh-zo9os]

Sir please make video on unsupervised classification

[@vikasghadamode]

Okay

[@nawshinzubaida3141]

my calculate geometry for 2021 data does not give me selection for area in sq km

[@nawshinzubaida3141]

is that a problem ?

[@vikasghadamode]

Then what is the unit of area you are getting

[@hani76684]

Thank you very much this helped me a lot

[@emangaroon8402]

Sir Make video about the different between the types of images plllz

[@sakuramirai4521]

I would like to know how to write the different too..

[@shefalikundu8731]

and the image classification option is not active

[@syafrilkrisnanda3820]

any solution? ive had the same problem

[@syafrilkrisnanda3820]

i have the solution

[@anubhavmaurya8959]

​@@syafrilkrisnanda3820 i also have the same issue.....u can't use my image classification

[@sidharthgs7844]

​@@syafrilkrisnanda3820what is it?

[@uditsaxena8195]

Same here

[@HelloChannel1994]

Sir , i am doing my master in GIS. My thesis topic is also same ....urban sprawl analysis . I have some issues regarding this . Can you give your email address. Then i can contact with you .

[@vikasghadamode]

[e-mail]

[@reeteshkumar941]

Good morning sir How to create PGDB file in arc gis Plz reply I am waiting

[@revatidudhane2918]

Hello sir, my classification table is not working.... what can I do? I was extracted my study area , and changed a band value.... As per your video like band_5,band_4,band_3. And then I am trying to image classification. And that table is not working 😞 please help me.

[@vikasghadamode]

Save signature file on desktop

[@EdmundYedda-x3t]

Janie Ridge

[@aryadevij.s2201]

sir whenever I am trying to save signature file, it is showing failed to create signature file. I am also try to save signature file in desktop, it will be shown as same. Sir please give a solution...

[@vikasghadamode]

Too many pixels in a signature file can cause ArcGIS to frequently experience issues. you can reduce the size of pixel sample and try again

[@balanmohan1409]

Sir, Is there any possible way to identify salt affected area in lulc

[@ramyasinghbhadoriya7683]

Where to get landstat images as USGS is showing images only from 2013

[@vikasghadamode]

You can download Landsat 5 or 7 image older then 2013

[@ramyasinghbhadoriya7683]

@@vikasghadamodeis the process flow is same for LULC using Landstat 5

[@vikasghadamode]

@@ramyasinghbhadoriya7683 Yes process is same just you need to add first 5 Bands for Mosaic in Landsat 5

[@ramyasinghbhadoriya7683]

@@vikasghadamode thank you

[@NjemaMichael]

Very helpful 😊

[@MdAkram-ti4tm]

Thanks God Finally got my destination... Sir, I Have LISS-4 multi date data, to analysis change detection but the problem is LISS-4 satellite image only having 4-bands... Pls Help me in the thesis work...thanks in Advance

[@vikasghadamode]

Contact me on email [e-mail]

[@shefalikundu8731]

sir after the band composite, my outcome image is very bright. I also tried histogram equalization but did not work. plz, tell me what to do.

[@MarkAngeloBalite-r2c]

try to set the type. then choose custom or none

[@subhasreebisoi3825]

Why I m facing problem during uploading Landsat image .it shows me to build raster pyramid.and also the image classification tool is not working. Pls tell me how can I do it?

[@vikasghadamode]

Click yes on build raster pyramid and as you are saying classification tool is not working for that go to customize- then Extensions- Select all the extensions

[@medhah.v5319]

I need LULC but i not getting the correct LULC by process can u help me out i have 10 bands to do but i not getting it. Please can you help out in this???

[@vikasghadamode]

Contact me on my email [e-mail]

[@rehanagulzar639]

Thank you soo much sir your video is very helpful for me but sir i have a question how to show are in percentage in a pie chart of land cover map

[@vikasghadamode]

You Can select Lulc class and Percentage class then go to insert and click on pie chart

[@muhammadshahzad5377]

Sir how we can download LULC for Asian region which matches NLCD coding. I want to calculate Evapotranspiration using Landsat images. Please answer

[@krishnakumartiwari6602]

How to consider a reference map for selection of sample pixel while making spectral signature files.

[@vishwaprasadkb2712]

Sir i can't open up image classification

[@vikasghadamode]

Go to customize (top line arcmap, in between geoprocessing and windows ) - then go to Extension and select spatial Analysis then your image classification tool will activate

[@rayeesrashid84]

As I can see few pixles of built up are mixing with barren land which can can't yield appropriate results. How to remove such errors during the selection of training samples

[@vikasghadamode]

Select training sample where you can see clearly pixels of built up area and barren land

[@PRIYASINGH-kn9ry]

Very Helpful for my study

[@vanitakendre5459]

Sir Maine 7 band use kre hai ... aur mai jb usme se mera study area extract kr rhi hu to band composition is different different for comp band and my extracted study area ....mai kya kru

[@vikasghadamode]

Contact me [e-mail]

[@sharmisthabhowmik9599]

Sir whenever I am trying to save sig it is showing failed to create sig. Sir please give a solution to it. I sm using ArcGis 10.8

[@vikasghadamode]

Try to save on Desktop

[@AdilaYameen]

Sir what is Landsat collection 1 level 1 ??Is it necessary to select this?As the area of my concern that is Himachal pradesh this option is not showing Landsat collection 2 level 2 is there ,which one should i select??

[@vikasghadamode]

Now they removed Landsat collection 1 from website you can download collection 2 level 2

[@AdilaYameen]

@@vikasghadamode thank you so much sir.Sir i have another doubt .i have to create lulc map of himachal pradesh When marking the site in ugs earth explorer the footprint is showing of some particular area not of himachal pradesh as a hole.So how should i cover the whole area of himachal pradesh?

[@vikasghadamode]

@@AdilaYameen You need to download all the Landsat tiles which are coming in Himachal Pradesh then create band composite in ArcMap and mosaic

[@AdilaYameen]

@@vikasghadamode Okay.Sir is there any videos related to it you have uploaded??because i am very new to arc gis ..

[@vikasghadamode]

@@AdilaYameen kzbin.info/www/bejne/f2bWkmVqf892aKMsi=0MMNJOHkxsQDlXxw

[@shathaabbs28]

sir. what is the different between extract by mask and when we just makes clip to stalitte image to the same erea that you already extract by mask ?

[@vikasghadamode]

Clip tool is useful for Vector data and Extract by mask is useful for raster data

[@ajaykumar-do4dl]

From where u downloaded that images

[@vikasghadamode]

From USGS earth explore

[@malikabubaker8194]

Great video sir but facing error during creating signature file

[@vikasghadamode]

@@malikabubaker8194 what error are you facing

[@malikabubaker8194]

@@vikasghadamode failed to create signature file

[@vikasghadamode]

@@malikabubaker8194 You can save signature file on desktop

[@malikabubaker8194]

@@vikasghadamode sir still same issue

[@AvinashKumar-vq1mg]

Nicely described...when I was looking for Landsat data for Uttarakhand state it only showed Landsat collection 1, doesn't consist any level...Should I go for Landsat collection 2 level-1 data???? Please guide..

[@vikasghadamode]

Yes no problem you can go for it

[@mohammadMazlomyar]

how to extract forest of vegetation

[@vikasghadamode]

You can create separate class for forest and vegetation

[@sambangibalaji3234]

Has u told in this video how to create LULC for the particular area ,,, After that I need the elevation points to find for the particular area which I have been taken before for LULC Can u pless explain

[@vikasghadamode]

Contact me [e-mail]

[@teferihabtamu5418]

How to create LULC code that SWAT will understand.

[@balogunoluwafemi001]

Hi Vikas, can you help explain on why my waterbody section has not been changing color? I have followed all instructions and tried all i could, but it still would not work. The first study period worked just fine.

[@vikasghadamode]

Send me photo on whatsapp with your problem, details of number is in the description box

[@balogunoluwafemi001]

@@vikasghadamode ok, thank you.

[@abhishekr3505]

which type of classification are you using sir Anderson or other

[@kartikshahi9138]

great tutorial sir

[@sougatamaji3166]

THE OUTPUT OF LULC MAP CLASSES IS NOT ARRANGED LIKE THE TRAINING INPUTS CLASS ARRANGEMENT.....WHAT IS THE SOLUTION?

[@vikasghadamode]

You can reclassify them accordingly you want

[@fredericksiama531]

I watch more than 5 or 6 time hope I'll pass my exam🥺 through this video.

[@vikasghadamode]

Best wishes for Exam

[@gideontolentino2613]

thank you

[@vishwaprasadkb2712]

Am not getting name column and area in attribute table.

[@imranmirza8722]

Awesome

[@mohamadzakibinmohammadazam2917]

Hello sir, i have a question. Which technique or method is suitable in GIS to land use? Bcoz im now doing my thesis. Hope you can answer my question. Greeting from Malaysia :)

[@vikasghadamode]

Supervised classification can be more accurate then unsupervised if we take more accurate training sample

[@vincei-jayfranco5002]

What to do sir, the image classification is not working

[@simranjeetkaur2219]

What about preprocessing and correction

[@vikasghadamode]

kzbin.info/www/bejne/foa4noylobCgp9ksi=oXoeitCr-Rb5wSRb

[@vikasghadamode]

Now you can validate your map

[@amnasaif1135]

Sir i make different 10 claasies and find the area of each zones which is present in each classes..can u plz help me

[@vikasghadamode]

So what can I help you

[@pooja149]

For my study area collection 1 level 1 is not present, so I selected collection 2 level 1 but there is so many option in downloading which one should I select

[@vikasghadamode]

Select Landsat Collection 2 Level-1

[@pooja149]

Thank you but there are 3 geotiff file which one should I download

[@aishwaryauke171]

In Images Classification tool add by right click to blank space but this not active? Can you tell mi what can u do next for activation??

[@vikasghadamode]

Go to Customize- then extensions.. then select Spatial analysis tool,your image classification tool will activate

[@abhirajsidharthan9724]

@@vikasghadamode thank you

[@whitewolf1484]

After taking the sample when go to they are showing failed to create signature file

[@vikasghadamode]

Try to save signature file on desktop might be it will work

[@voiceofnature504]

very good explanation! Thank you!

[@rameezahmad5486]

If cloud cover is not less than 20 then what should we do

[@sadiyaidris4819]

The map has classified barren land as builtup area at some places how to mitigate it?

[@vikasghadamode]

Increase more training sample point in barren Land where it's showing Built up area

[@ofcpro6478]

Your tutorials are very helpful. 😇

[@rajeshpoudel9939]

namaste sir, Can you help us to check the accuracy of our lulc map of our basin as done by this video. You can make video on this topic too.

[@BEPROJECT-jg9db]

how to download arcgis software for free

[@anubhavmaurya8959]

Thank you for such a clear and informative video.😇😇😇

[@vikasghadamode]

Most welcome

[@houriakada8509]

Please what's the difference between IDW and Krigeage? thank you so much

[@himaniyadav5023]

Can I use all the available 12 bands instead of 7 ? How do we decide the no. ?

[@vikasghadamode]

Resolution of 1 to 7 band is 30 meter, same spatial resolution so that's we use 7 bands

[@medhah.v5319]

Can u help me out in getting the data of LULC for 2020 or 2019 please for my project????

[@vikasghadamode]

Contact me on my email [e-mail]

[@medhah.v5319]

@@vikasghadamode ok

[@saptarshibharati]

Thanks for this video, It is very helpful to me .

[@vikasghadamode]

Welcome

[@balogunoluwafemi001]

Thank you very much Vikas! 😊

[@vigneshrathinam8285]

Good Video sir. What is the Resolution of Landsat 8 image??

[@vikasghadamode]

30 meter

[@ruyidakhan3139]

Wonderful and Great explanation

[@somuchfawn]

My landsat composite after shapefile extraction of study area comes out super bright. I dunno what I’m doing wrong.

[@vikasghadamode]

You need to histogram equalization in image property

[@somuchfawn]

@@vikasghadamode thanks so much for the reply. sadly, that didn’t work! I did it without study area extraction. but my signature file fails to create!!!

[@vikasghadamode]

@@somuchfawn i need to check your image so send me details on [e-mail]