How to create title block and its template in AutoCAD - Part 2 of 2

[@sourcecad]

Learn AutoCAD for free using this step-by-step AutoCAD tutorial series containing nearly 40 videos with lesson files sourcecad.com/courses/autocad-essentials-course/

[@ethandkharofficial2804]

Could you please send me the link where I can download and install the software at my email id [e-mail]

[@bradowen8862]

Thank you so much. I've learned a lot from your videos 😊😊😊

[@INK1217]

I realize this vid is 4yrs old, but I have been searching for a tutorial for a few weeks now and this was BY FAR the ABSOLUTE BEST and MOST informative one. It’s a shame that nobody makes good beginner videos anymore. THANKS SourceCAD for being there when I really needed help.

[@Profcrob]

I have been researching this topic for two weeks. Your video clearly outlines the process and is simple to understand. Thank you for this information! This video was brilliantly crafted!

[@RaphaelGono15]

this has saved my soul. no one has explained this better in my entire school

[@queakin381]

you explained very well, i was able to make my title block within half an hour, my deadline is in 10 days so thank you very much

[@TheRainayan]

Verry good teacher so far for Autocad. The reason I am saying good teacher, there are lots of Autocad engineer and knowledgeable but not many able to explain details like him .

[@mattedwoods]

As a new user you are my go to guy for a reference and simple solutions and all my answers. GREAT THANK YOU

[@omarghani2431]

I have been following your Tutorials for a long time. You have explained each concepts very clearly. A world of tnx dear Sir. God bless U! Love from Afghanistan ❤🇦🇫🌷

[@DiscoReggae]

Nice going, I even created a layout that had both ANSI A and ANSI B on one template and it worked wonderfully, whenever I selected from template it prompted me to select one of the two layouts. Didn't know it could work like that.

[@constructionsupervision]

I appreciate u sir.. I saw 100 videos but i didn't get this much information about title block.. Great.. 💕💕💓💝💓💝💓💕

[@JM-ee5bp]

This is THE best tutorial for creating a title block and new layout. THANK YOU!!!!

[@nabilaizzatijamil2106]

the only tutorials that worked plus explained well and clear 😭✊

[@RajdeepKaurBhamrah]

Sir, you taught in such a simple way, liked it.

[@jwizzy412]

THANK YOU. YOUR 2 STEP SERIES HELPED ME SO MUCH. GOD BLESS YOU

[@mrcoolabhishek123]

Thanks a lot for posting such high quality content. It helped me a lot.

[@TomBaugh]

Thankyou for this.. was struggling to understand how title block worked. !!

[@alirehman2976]

This drawing was the practical Paper in my AutoCAD exam from City & Guilds. Bye the way nice video.

[@sigururjonragnarsonlong3116]

Thanks :) I learn more on this 17 min then hole winter from my teacher in school 🤣 Thanks a lot

[@virgilioagot913]

I have learn your presentation step by step sir, thank you

[@anuraninp7920]

Thank you so much for making this video...this video helped me a lot..

[@allenbrightmalisa697]

Instead of being drawn on, you can say date. Well explained

[@jasonwu2165]

Thank you! It helps me a lot in my assignment!

[@RohitSharma-hn4mp]

nice explanation, very easy to understand I have a question though. We already had created the template in ANSI A dimensions. Also, we modified the page layout to ANSI A. The question is, why we had to fit the template to layout tab using stretch command? I mean it should have fitted perfectly in the layout page.

[@iwatchwithnoads7480]

I have the same question too. My guess is it's because we didn't select full bleed page. Our drawing is ANSI A, our page is ANSI A, but we had to fit the drawing inside a smaller rectangle in the page.

[@Chrolllo.]

Same question :((. What do we do with the change in dimensions?? What was the point of doing it in the model space if it will change in layout?

[@Chrolllo.]

@@iwatchwithnoads7480 Do u know how to set all the margins to 0??

[@sdhafjourney]

wow! we always have everytNice tutorialng to learn! Great to know you!

[@californowoodfiredovens8736]

GREAT JOB EXPLAINING IT!!! Thank you.

[@ghulamghani5572]

I got many things from U dear Sir. Tnx a lot U r the best and keep it up.❤🌷🌹

[@arifenigineer]

Great ! I am impressed, Jaipraksh.

[@AliJan-rm5hl]

Thanks for your video, I learn lots of thing from videos now i want to learn how to insert image fit image in title box and zoom to fill specific box in over all drawing layout

[@Mithilee]

Thank you very much for sharing this piece of knowledge. It is helpful.

[@fridayelue7708]

Good and clear presentation, well done sir.

[@inbanesanssamipillai1808]

Thank you very much for the video. It's of great help for me.

[@siminaseer3446]

Thank you for this excelent tutorial

[@uwawuikechidera7422]

My paste clip shows a very small scale of the titleblock 😩

[@Lollypops763]

you are a brilliant man

[@khaingshwezinmyint5664]

Thanks a bunch, Mr. 😀

[@forrestunderwood3174]

Over 300,000 views and only 3000 could be bothered to just hit like???? Wow.

[@Rideout11000]

This was SUPER helpful! Thanks much!

[@josephnyamae8316]

Learning a lot from you tutor

[@adeoyeolatunde8870]

Thank you so much, perfect and excellent.

[@user-co9tz4mb4x]

Thank you so much very well explained.

[@waypurdy]

So helpful. Thank you!

[@btsforever50]

Learned A lot... thanks.

[@Ghodzilla]

thank you very much; was a great review for getting back into it

[@donaldchatendeuka5228]

Very helpful. Thank you very much!

[@user-hk3ux3js9w]

thank you that's VERY helpful!

[@andremiller482]

Bro you could highlight the entire drawing and Autocad will scale the title block to the size of the paper. The scale that you make your drawing will still reflect your original.

[@rudycrespoaguinaga4385]

i finally made so good soft. thanks ❤

[@phitune6614]

THANK YOU SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO MUCH . BIG THUMBS UP

[@erinfontanilla]

Thank you so much, this tutorial was really helpful!

[@mikeknox1352]

Thanks this helped me out today - much appreciated!

[@nazrulislam5343]

Most helpful video. thank brother.

[@kalinduneranga1215]

Good teaching

[@johncarroll6910]

Great job... Thank you.

[@asifqureshi8628]

Excellent 👍

[@helalsdream2451]

Wonderfull course.... 😍😍

[@engelmichal]

Thanks a lot it was most helpful

[@KaterinaBuscemi]

Such a great tutorial, thank you!

[@paulmorrey733]

Great content - thanks for sharing

[@jimhull3273]

Great video!, explained very well, Thank You!

[@chandinin3428]

Thank you very much

[@demerit6824]

It's easier than it looks. I found learning soft design (like setups - I use SERUM) much more scary but it's doable, you just gotta be

[@ericmutunga4465]

wonderfull useful one

[@stephenwadsworth5038]

Very useful thank you

[@jamesnguyen5495]

Thank you very much for the knowledge you share.

[@MrSmitty007j]

Nicely done. Great information

[@fzone94]

Thanks for the tutorial video. Really helpful. One question: The FIELD command does not work for author and title, even after I put in REA command. Please enlighten me.

[@pulsie]

Great video, thank you!!!

[@nhaat3652]

Nice drawing! keep it up 😍

[@rahmanrahmani2896]

Could you please make one attributed title block and also explain how to create and amend attributes within title block or any other blocks. Your help always would be appreciated !!! R Rahmani

[@rahmanrahmani2896]

Thank you and appreciated! Is it possible to make another title block using attributes instead of field function. The reason is, I would like to know how attributes work! Thank you and appreciated!

[@lujainhady2826]

Thank you for help me

[@gel7656]

perfectly done, mate. thanks.

[@rahmanrahmani2896]

Very helpful tutorials well presented and thanks millions !!! R Rahmani

[@AboSagerAlbadri]

Thank you

[@freemannew5318]

Good tutorial. But sir, I need a tutorial to add symbol as a custom point style in autocad.thanks

[@grtinfulleffect8349]

Thanks.

[@sweatersweater1234]

Great tutorials, thank you

[@hsf2047]

Do we have to repeat the process for every new layout in the dwg file?

[@aimeeheath4405]

Huge help thank you so much! Great video :)

[@kannikagowda2905]

Sir do we have to prepare separate title block for different size of papers like a3 a4 ??

[@jarinakhatun5552]

it helped me a lot . thank you very much .can i make B size paper the same way ?

[@ranagam5184]

my drawing didn't fit in layout. all the drawing came in one layout how to select particular portion? like we select window during print.

[@abibazarsali6260]

Thank you Sir for this..

[@benhill445]

Thank you for this tutorial: One Q though, I have made several drawings in my layout that I want to individually place in my new title block. How would I do this?

[@benhill445]

Also, I attempted to copy base one of my drawings to the clip board and then paste it to the title block but my drawing is too large now. How do I resize?

[@RohitSharma-hn4mp]

@@benhill445 you mean you want to put different .dwg files in one template? or you want to break parts from a drawing and plot them on different title blocks?

[@josephBal149]

Thanks alot for your time and knowledge. Keep it up.

[@sourcecad]

Welcome Joseph

[@elpap9698]

Thank you very much for the video, really helpful! I have the LT CAD version and I am wondering if the Import Template Viewport works or not with that version.

[@jayadinash9102]

Thank you, this is very helpful. Is there a way to leave a "blank" field, so one can fill it in after the template has been combined with the drawing?

[@sebronhiob7664]

Thanks, alot.

[@kulwantsinghsonu84]

hi sir when I am trying to use my saved drawing template in a file as you shows make from template it will not work in AutoCAD 2020. please help.

[@PR-gf6sw]

can we use same tile bock to print in different sizes like a0 a1 a2 a3 a4.

[@wanjhongher8943]

I followed all the steps until when I wanna put the drawing in the template because for me the template does not appear, it's empty in my ANSI A layout...it's empty. SourceCAD please help.....

[@ramand6490]

Do we have to make it again full layout for next drawing

[@CADViewerDWGFastView]

We can try to open and edit the drawing with our mobile phone

[@elsaobregon7558]

I wish my teacher will explain as well as you do. Just a question, when they say plot in Scale 1/4" and using a title block how do you do that? I will appreciate your comments.

[@vasudhaivakutumbakamconsul7888]

thanks.it is very helpful

[@mattdelport4143]

Hey What am I doing wrong, when I stretch to fit the title block on the paper the text get pushed on top of each other. Thank you for the great video.

[@Hana-dh6qm]

do you have the tutorial for the 2d drawing on the video?

[@SCOSMOS010]

Where to define the fields in the drawing. How did the field drawing no and name of the checker got fetched into the template.

[@iEduardoTheGreat]

hey thanks, great tutorials!

[@patrickschardt7724]

Great tutorial. How do you convert inches to feet and inches in AutoCAD