How to Crochet a Plant POT EASY 🪴For Beginners in step by step tutorial

[@nengurumi]

Updated seamless POT here👉 - kzbin.info/www/bejne/i6ipYpmHbbyKhrM

[@bunnyskoop91]

Pattern for the Pot. ------------------- Round 1: Mr, ch, 8sc. Round 2: inc. each for 16st. Round 3: sc, inc. For 24sts Round 4: sc 2, inc. For 32sts. Round 5: sc 3, inc. For 40sts Round 6: sc 4, inc. For 48sts Round 7: blo sc each for 48sts Round 8-10: sc each for 48sts Round 11: sc 5, inc. For 56sts Round 12-18: sc each for 56sts Round 19: flo sc each for 56sts Round 20: sc 6, inc. For 64sts Round 21: sc each for 64sts. Round 22: flo sc each for 64sts. Round 23-24: sc each for 64sts. Cut your yarn, sew yarn needle into back loop of second chain from work. Then into front loop of next chain.sew it down in the inside center of your work.

[@rileyrandazzo7322]

For someone new to crocheting I LOVED this video, super easy to follow and my pot turned out pretty good! Thank you!!

[@nengurumi]

That's great 👍 thanks for the feedback 😀

[@fquintana73]

The video was easy to follow without any extra chatter. Clear explanations were provided. I subscribed. Thank you! Just finished my pot and I am delighted. Thank you for the calming voice.

[@nengurumi]

Thanks for the feedback 🤗

[@giatv5]

Really the best instructionvideo ever. Informative, straight to the point, easy to see and follow along! And sooo cute results! Thank you sososo much!

[@nengurumi]

Oh that's great, there is also updated pot you can see the difference in my pinned comment. Thank you so much 💓

[@billiemiller7223]

Thank you for your video. I've enjoyed making the pot with you. On to the plant parts now. 😊

[@nengurumi]

🤗happy to hear that! Have some tea or coffee ☕️

[@sleepyfroggies5111]

***1*** ( 0:26 )Round 1: Magic ring, ch 1, 8 sc into ring. Tighten tail of the yarn. ( 0:50 )Round 2: inc in each stitch (16sts) ( 1:35 )Round 3: sc, 1 inc (24sts) ( 2:22 )Round 4: sc for two stitches, then inc. repeat for round (sc, sc, inc- for 32sts) ( 3:07 )Round 5: sc for three stitches, then 1 inc. repeat for round (sc, sc, sc, inc- for 40sts) ( 3:56 )Round 6: Sc for four stitches, then 1 inc. repeat for round (sc, sc, sc, sc, inc- for 48sts) ( 4:39 )Round 7: BLO sc entire round (48sts) ( 5:40 )Round 8-10: sc for entire rounds, 48sts each (144 total) ( 6:03 )Round 11: sc in next five stitches, 1 inc next. Repeat for round (sc, sc, sc, sc, sc, inc- for 56sts) ( 6:27 )Round 12-18: sc entire rounds, 56sts each (380sts total) ( 6:58 )Round 19: FLO sc entire round (56sts) ( 7:39 )Round 20: sc for 6 stitches, 1inc. Repeat for round (sc, sc, sc, sc, sc, sc, inc- 64 sts) ( 8:43 )Round 21: sc entire round (64sts) ( 9:04 )Round 22: FLO sc for entire round (64sts) ( 9:30 )Rounds 23-24: sc in each stitch for entire round, 64 sts each (128 total) ***Once done, cut yarn and thread yarn through second chain from threading needle- and then through back loop from where excess yarn is and hide stitches.*** ***2*** ( 12:09 )Round 1: slip knot, ch 12. Connect chain to first chain. Make a sc into that loop. ( 13:29 )Round 2: inc each (24sts) ( 13:50 )Round 3: sc for 2 stitches, 1 inc. repeat. (Sc, sc, inc- for 32sts) ( 14:37 )Round 4: sc for 3 stitches, 1 inc. repeat for round (sc, sc, sc, inc- for 40 sts) ( 15:23 )Round 5: sc for next 4 sts, 1 inc. repeat for round (sc, sc, sc, sc, in - for 48sts) ( 15:59 )Round 6: sc for 5 stitches, 1 inc. repeat for round. (Sc, sc, sc, sc, sc, inc- for 56sts) ***Cut yarn and thread the tail through to hide it. Then, once done, sew it to connect with the pot base (first product- “1”). Final step, insert stuffing and insert separately crocheted plant.***

[@fathimarizka1432]

Will you be able to do a tutorial on how to crochet that fern like leaves that's shown in this video thumbnail please....

[@nengurumi]

That's great idea okay 👍 I'll be posting it in my next video.

[@fathimarizka1432]

So sweet of you....! 😍😍

[@SheyPerera]

Loved it

[@nengurumi]

🤗

[@shelley2998]

Trying to make my first flower pot, for a corpse flower,this is my first one of this kind of stuff ever trying any suggestions

[@soySara229]

Thanks so much

[@nengurumi]

🤗

[@tortillawhisperer5811]

Good Job this was very helpful

[@nengurumi]

🤗

[@afraali6370]

I’m gonna make one for my teacher. Once im done im gonna show you on instagram 🥰🥰

[@nengurumi]

🤗 okay 👍

[@cocoblanco5824]

Hello, I'm new to your channel, Just wanted to clarify something, at the beginning you said you used 100% acrylic but on the materials used it says 100 % cotton?:) by the way, your instructions are so clear. Love this video. Thank you. ☺

[@nengurumi]

The pot I used 100% cotton , the dirt brown I used acrylic yarn , thanks for your feedback I would likely write this on my description 😀.

[@SheyPerera]

I am also new to this channel and I love it. The plants are soooooo cute 😊

[@smartsewisthandicrafts3282]

😍Great... thank you!

[@mommyzethartcorner7685]

i think your bigger size pot is what i need. tnx so much! but can i ask the diameter at the top? tia

[@nengurumi]

About 10 - 11 cintemeter

[@nengurumi]

You can check the photos on my Instagram account, thank you 😊

[@mommyzethartcorner7685]

thank u again!

[@phimdaosat4057]

I am really stuck with artificial dirt part. I understand the first round slipknot and 12 chain and connect them. What i don’t understand is the second round with increase. Do i increase into that first 12 chain? I did that and I find it not looking like hers. When she started round two it seems like there are sc all over that before the increase. if i have to do the increase into the 12chain, i want some advice since it is so hard to differentiate when the new chain start. I AM NEW and thank you

[@nengurumi]

Hi phim pardon for the late response, follow this. Slip knot ch12 inc - 24 Sc2 ,inc * - 32 Sc3, inc * - 40 Sc4, inc *- 48 Sc5, inc *- 56 Leave extra long tail If you're still confuse count the number of sts before going to the next round. I hope these helps. 😬

[@kaelynswift7250]

I didn’t cut the tail of my artificial dirt long enough to connect it all to the pot. How else would I be able to connect it??

[@nengurumi]

Hi Kaelyn, You can cut an extra yarn long enough to close the pot and hide the yarn tail inside.

[@Cadence_-jo5wx]

Is there a written pattern ?

[@Pur3soul]

Hi I’m having a bit of trouble with the magic ring my magic rings keeps ending up not like yours

[@nengurumi]

Try to make the settings in slow mode , you can do it. 💪

[@Drxgonfly613]

I THINK you could also do the two chain method and it works the same way

[@abbkdabbs]

I followed this all the way until round 10 but my "pot" was flat and didn't curve so I gave up.

[@nengurumi]

Hi Abeer , so sad about that, can you read patterns? i will give you the written pattern dm me on instagram.😟

[@starrspoter]

what about the plant? were is the vid for that

[@clairelinker5742]

in the video at 13:18 and 13:20 there is an editing jump, and there is an extra round of stitches between the initial chain and the start of round 2. what happened in this time? did you do increase stitches for each loop of the initial chain?

[@nengurumi]

12, 24, 32, 40, 48,56, hi Claire follow this total of sts. Yes

[@phimdaosat4057]

@@nengurumii am soooo new. Can you please explain this again if you could. So after the 12 chain you has increase into that 12chain? To get 24? So into the first 12 chain stitch will have 2 sc in each of that chain?

[@user-ub1ii4xi8r]

я застряла на 3 кругу. подскажите, пожалуйста, нужно чередовать сначала один столбик без накида, в следующую петлю 2 столбика без накида, потом 1 столбик без накида, так?

[@nengurumi]

да, не торопитесь, посчитайте количество стежков, которые я показал вам в видео.

[@nengurumi]

или посмотрите закрепленный комментарий, его новый модернизированный горшок.

[@Anna-zx6tv]

Hey live the video but I don't understand how on the dirt part we connect the chain by only going in one loop but then when you say to go in the same stitch we go into both loops? I don't have the two loops together, they're separated from the step before and now I'm stuck :(

[@nengurumi]

Which round on the dirt? Hi anna

[@Anna-zx6tv]

@nengurumi hi thank you for the response! The first stitch of the second round and the chain connecting stitch seem to confuse me. Maybe I'm just blind but we are connecting in only one loop of the stitch but then the next step is to go again in the same stitch. The same stitch is once only one loop and at the beginning of round two, both loops, the whole stitch. I'm so confused :((

[@nengurumi]

@@Anna-zx6tv oh I see, ye it's a bit tricky , chain12 first round, second round you just need to insert the hook into the 1st chain and do a 2sc, for 24sts.

[@nengurumi]

@@Anna-zx6tv come to my Instagram I will show you the picture.

[@Anna-zx6tv]

Honestly I just did it with a magic ring now and it worked fine 😅😂😂 thank you so much for this amazing tutorial! I'll still follow you on insta though 🩷

[@Hello-rk7rr]

I crocheted this, but the pot seemed smaller than the one you made in the video. Did you make a pot following another pattern and gave us another one? No hate, i just wanna know 😊

[@nengurumi]

It's 12 cm diameter, 9cm long, it's the original pattern, remember to check the description and size of the hook.

[@nengurumi]

You can check my Instagram photo's, thanks for the feedback 🙂

[@Hello-rk7rr]

Tysm! Great work! I just wasn’t sure.

[@Hello-rk7rr]

@@nengurumi ah yes, hook size

[@Hello-rk7rr]

I didn’t even bother watching the description. I ended up using a 2.5 hook size 🤦‍♀️

[@Pur3soul]

17:27

[@tart4442]

4:41

[@isabellashatto9075]

Hey can you possibly send me the pattern instructions? If I need to message you on a different app I can

[@nengurumi]

Hi isabell you can buy my pattern on etsy 😅 it's complete pdf pattern.

[@Froggies74]

Why would you steal that video 😠

[@nengurumi]

Hi nini im transfering my videos to this new channel sorry for the inconvinience.

[@Froggies74]

@@nengurumi oh okay, good to know i thought these were stolen!

[@nengurumi]

@@Froggies74 no i actually private the old video on my first channel, i want to start fresh on this channel, im so glad you opened up to this, btw you made the first comment on this channel 💓you made me happy🥰

[@tart4442]

5:58

[@nengurumi]

Tart are you okay? how's this tutorial for you.

[@tart4442]

@@nengurumi I think I messed up, I was stamping times that I left off of when I went to go do something

[@nengurumi]

@Tart ah, are you using phone? In desktop you can see the red line when you play it, take note of the round so will be easy.

[@tart4442]

@@nengurumi I’ll try again

[@tart4442]

Also like in row 7 my circle started like folding, do u know why?