How to cut and sew a female jumpsuit. detailed and easy tutorial.

[@elmalabelle5206]

Hi ma great video, please I’m wondering how the back pant waist matched the back bodice,because 0.5” was taken out of the back zipper allowance,which makes the pant back waist line 0.5” bigger. That’s where am at and I don’t know what do

[@stylebyseyi]

Pls repeat your question again because I don't understand

[@olufemitemitope6319]

I love all ur tutorials most especially on trouser pant.

[@stylebyseyi]

Thank you

[@helenfanegan1102]

Thank you for this explicit tutorial.

[@stylebyseyi]

You're welcome

[@AdewaleAinex]

Thank you ma'am GOD bless you ma

[@stylebyseyi]

Amen

[@tolulopeidowu3582]

mama❤ ur teaching is top notch,tanks,am here to ask dat how will you get the belly button on the measurement or will the joining of the upper and lower part falls on the belly button with dat 3 inches added or where on the body when you put it on, thanks

[@stylebyseyi]

The joining will fall on the belly button when joined correctly

[@tolulopeidowu3582]

​@@stylebyseyiok,mama

[@tolulopeidowu3582]

pls my under burst is 15, what inches will I add , before I join with the (trouser that you said we are going to add 3 inches to)tanks

[@Sayo_pearlcouture]

I’m so happy for this thank you ma Pls ma why’s the front upper part longer than the back

[@stylebyseyi]

Because our front and back is not the same length cos of our bust. Take a tape and tie it around your waist, ask someone to measure your back and front waist length, you will see that it's not the same length. That's is why when someone don't it, their back zip will be folding

[@Sayo_pearlcouture]

@@stylebyseyi oh okay ma so is this relevant in all cases like cutting a dress too is it applicable

[@stylebyseyi]

Yes dear

[@oyewolekuburat4254]

Thanks for all you do ma'am,will i measure my waist measurement on the 3 inches added?

[@stylebyseyi]

Yes

[@AbiolaIbraheem]

Please sis, can i use this same pattern for plus size/thick ladies?

[@stylebyseyi]

Yes

[@olaideaderonke1580]

Hello ma ....watched your pant video,really helpful My question is since there was no increment for back and dropping for front trouser now added to 15 back bodice and 16.5 front bodice .....won’t there be excess fabric for front jumpsuit? 2:05

[@stylebyseyi]

No dear, that's is why the upper part of the jumpsuit is not the same length. If you watch the video from start, you will notice the front and back length is not the same. That solves it

[@olaideaderonke1580]

@@stylebyseyi okay thank you Ma ....I’ll give it a try

[@adegbenrokehinde8220]

Pls ma,I also want to ask that.the 3 inches will be added to both the front and the back of the trouser part of the jump suit right?

[@stylebyseyi]

It was added at the front and you know you will use the front to cut the back so there's no need adding it to the back again

[@adegbenrokehinde8220]

Ok ma

[@CawtyJ_Tv]

For the trouser part, are we still going to add 3.5” for the back which would be taken down to the added 2.5” for the crotch?

[@stylebyseyi]

Yes

[@omowunmiaminat8026]

Goodmorning ma. Please ma, is it still necessary we add 1.5 for the upper part back trouser

[@stylebyseyi]

This is a jumpsuit. Everything that is needed is stated there except you didn't pay attention to the video.

[@tolulopeidowu3582]

pls didi you take the dart for the front and back trouser

[@stylebyseyi]

I don't add dart to my trouser pattern

[@adegbenrokehinde8220]

Pls ma,why is the three inches added to the upper part of the trouser length?and I noticed it is not slant like the tutorial of the previous trouser you illustrated in your previous post

[@stylebyseyi]

Because it's a jumpsuit dear. You don't need to slant and if you didn't add 2.5 or 3 inches to the upper part, it will be short on the crotch area and you won't be able to wear it

[@marvelous2950]

Wonderful. How do I add pocket ma

[@stylebyseyi]

I guess you have watched the recent tutorial

[@shomefunabidemi4786]

Please ma is the 3inches extension standard or it varies

[@stylebyseyi]

Slightly standard. Just add half inch to it to make it 3.5. the half inch is for joining it to the upper part

[@nafisatbisola2124]

Ma I didn't find drafting of d trouser I mean d one u draft on pattern paper on ur distrition box

[@stylebyseyi]

This is the link to the cutting of trouser kzbin.info/www/bejne/Y3yYoomQqJiqbLc

[@MinnahStitches]

@@stylebyseyi

[@CawtyJ_Tv]

Assuming the front waist length is 17.5”,while the back is 17”. While cutting, do you mark 17.5 for the front and 17 for the back?. So the difference for these is 0.5 right? Will the bust dart be 0.5?

[@stylebyseyi]

Yes but your calculations is wrong, the front and back waist length cannot be 0.5 except you're just citing an example though

[@CawtyJ_Tv]

Thank you ma

[@MinnahStitches]

Ma'am after using 3 inches as d base of my trouser I ended with s saggy crotch d trouser didn't fit in very well,I don't even know wat to do now,am fed up,ma'am pls wat can I do

[@stylebyseyi]

It depends on your waist length. Three inches is not supposed to be too much. Loose it and reduce some inches from the top length

[@ritaeedward]

Rita Edward and I like all ur style

[@stylebyseyi]

Thank you

[@adegbenrokehinde8220]

Ma..I noticed there is no dart in the trouser part of this jumpsuit....why ma?

[@stylebyseyi]

I don't put dart but you can put it if you like, just add your dart allowance

[@adegbenrokehinde8220]

Ok ma .....thank you ma.

[@CawtyJ_Tv]

After adding the 3” , the measurements starts from the waist and not the 3” marked?

[@stylebyseyi]

Yes

[@CawtyJ_Tv]

Is the 1.5 difference for the front and back waist length standard? Or does it varies according to the client’s front and back waist length measurements?

[@stylebyseyi]

It varies. Different persons with different measurements

[@CawtyJ_Tv]

Thank you ma

[@stylebyseyi]

first Trouser pattern tutorial here kzbin.info/www/bejne/Y3yYoomQqJiqbLc

[@anohglory7406]

Pls ma, is crotch line measurement start from the extra 3 inch or from the norrmal waist line. Thanks

[@stylebyseyi]

From the normal waist line

[@anohglory7406]

@@stylebyseyi thanks ma

[@Sayo_pearlcouture]

And again ma you didn’t shape the front of the trouser by 1.5 like we normally do for trouser

[@stylebyseyi]

Because it's a jumpsuit dear. No need shaping it

[@Sayo_pearlcouture]

@@stylebyseyi okay thank you ma God bless you

[@stylebyseyi]

Amen 🥰🥰

[@stylebyseyi]

Link to the trouser pattern tutorial sewmates 🥰 kzbin.info/www/bejne/Y3yYoomQqJiqbLc